Vision Systems

0.00 kr

Sold Out

Specifications

Model				GL-SA36S
Type				Protection cover Slim type for 36 beam axes
Overview				This protective case protects the main unit from impacts.
Applicable product				GL-S36SH
Number included				1
Length				742.6 mm 29.24"
Material				aluminum
Note				2 each of the following are included: hexagon socket head cap screw (width across flats: 3 mm), washer, and special hexagon socket head cap screw (M4, length: 13 mm, width across flats: 3 mm).
Weight				230 g

Keyence LV-B102 Keyence

0.00 kr

Sold Out

Specifications

Model				LV-B102
Type				Mounting Bracket for Landscape Orientation
Applicable product				LV-NH100/NH110/H100/H110

Keyence SV-C3F Keyence

0.00 kr

Sold Out

Specifications

Model				SV-C3F
Type				Motor power cable, Standard
Length				3 m 9.8'
Note				for 3 kW / 5 kW motor

Keyence GL-VM10LP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM10LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			10
Total length			400 mm 15.75"
Detection height			360 mm 14.17"
Protection height			445 mm 17.52"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.3
		OFF→ON	46.2 ^*3
		All blocked→ON	51.9 ^*4
	With channel A or B	ON→OFF	10.7
		OFF→ON	54.8 ^*3
		All blocked→ON	69.0 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	71 ^*5
		Receiver	85 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	49 ^*5
		Receiver	56 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		270 g 9.53 oz
	Receiver
	Total		540 g 19.06 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence CA-DBRS Keyence

3,299.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-L21V Keyence

5,890.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-84490 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XR-HT15MD Keyence

32,552.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VJ-3302 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VS-C1500CX Keyence

0.00 kr

Sold Out

Specifications

Model		VS-C1500CX
Storage	Internal storage	7 GB
	microSD card (external)	Max. 64 GB ^*1
Image sensor	Image size	1.1"
	Pixel size	2.5 μm 0.10 Mil
	Frame rate	40 fps
Lens	Mount	C-mount
I/O connection	Number of inputs	1 (insulated)
	Number of outputs	3 (insulated)
	Number of inputs/outputs	2 (insulated) (input and output switched via settings)
I/F	Ethernet	PoE IEEE 802.3at, M12 X cable × 1
	I/O	1 In/3 Out/2 In, Out M12 A cable × 1
	Lighting interface	Dedicated lighting connection interface × 1
	External media	microSD card slot × 1
Functions	Output image pixels	4400 × 3296
	Exposure time	0.008 msec to 1000 msec
	Image correction functions	Gain, Offset, Gamma correction, White balance, Fine HDR
	Indicators	OLED display, Status LED, Ethernet LED (LINK/ACT), SD card access indicator
	Buttons	Operation buttons × 3
	Installation support functions	Angle monitor
Power supply	Power voltage	24 V +25%/−20% or PoE (IEEE802.3at Power Class 4)
	Current consumption (camera only)	0.97 A, 18.7 W (for 19.2 V)/0.78 A, 18.7 W (for 24 V)
	Current consumption (including lighting)	4.7 A, 89.7 W (for 19.2 V)/3.8 A, 89.7 W (for 24 V)
	Current consumption (With CA-DEx10X connected)	11.3 A, 216.7 W (for 19.2 V)/9.1 A, 216.7 W (for 24 V) ^*2
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Relative humidity	85% RH or below (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.05 G2/Hz; X, Y, and Z directions, 0.5 hours (IEC60068-2-64)
	Shock resistance	50 G, 3 times in each of the 6 directions (IEC60068-2-27)
Size (H×W×D)		93.2 mm × 52.6 mm × 66 mm 3.67" × 2.07" × 2.60"
Case temperature		0°C to 65°C 32 to 149°F ^*3
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Case: Aluminum die-casting, Front cover: Glass ^*4
Weight		Approx. 420 g 14.83 oz
^1 Using the configuration software, format the media before use. ^2 Maximum instantaneous current. Average current is below current consumption (including lighting). ^3 Reference - Case temperature 65°C 149°F with 200 mm × 200 mm × 10 mm 7.87" × 7.87" × 0.39" aluminum board and at ambient temperature of 40°C 104°F. ^4 ESD-Safe, IEC61340-5-1 compliant.

Keyence OP-87604 Keyence

0.00 kr

Sold Out

Specifications

Model		OP-87604
Type		Display panel cable
Length		10 m 32.8'
Cable min. bending R		24 mm 0.94"
Environmental resistance	Enclosure rating	None
Material		PVC
Weight		Approx. 700 g

Keyence FU-98 Keyence

5,197.00 kr

Only 1 unit left

Specifications

Model		FU-98^*1
Type		Thrubeam
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2
Minimum bend radius		R40 mm1.575"
Minimum detectable object		Opaque material with a diameter of 0.2 mm0.008"^*2
Tightening torque		0.75 or less (when attaching the OP-87095)
Environmental resistance	Enclosure rating	IP67^*3
	Ambient temperature	-40 to +70 °C -40 to 158 °F (No condensation and no freezing)^*4
	Relative humidity	35 to 85 % RH (No freezing and No condensation)^*4
Material		Main unit case : PFA, tube : PTFE^*3
Accessories		Fiber cutter
Weight		Approx. 70 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state. ^3 Using this product in high-temperature liquids or steam may lead to penetration of the fluorocarbon polymers, which may cause fluctuations in the received light intensity and damage to the internal components. ^4 Use this product under the condition that if the ambient temperature exceeds 60 °C 140 °F, the absolute humidity is 60 °C 140 °F 85 % RH or less.

Keyence FD-EPH7 Keyence

0.00 kr

Sold Out

Specifications

Model				FD-EPH7
Pipe size	Outer diameter of pipe			1/4” (Approx. 6.35 mm 0.25") ^*1
	Compatible outer diameter range	Polyurethane		6.35 ±0.15 mm 0.25" ±0.006"
		Nylon		6.35 ±0.1 mm 0.25" ±0.004"
	Pipe materials			Resin pipe connectible to a one-touch coupling
Supported gases				Air, nitrogen, argon, and non-corrosive gases^*2
Supported gas temperature				−10°C to +60°C 14 to 140°F
Pressure resistance				1 MPa
Flow rate detection principle				Ultrasonic transmission time difference method
Flow rate specifications	Rated flow rate	(volume flow rate)		60 L/min 2.12 CFM
		(20°C 68°F, atmospheric pressure conversion) * Initial display	Gas at 20°C 68°F, 0.0 MPa
			Gas at 20°C 68°F, 0.2 MPa	180 L/min 6.35 CFM
			Gas at 20°C 68°F, 0.4 MPa	300 L/min 10.59 CFM
			Gas at 20°C 68°F, 0.6 MPa	420 L/min 14.8 CFM
	Measurement accuracy			±(2.0% of RD+1.0% of F.S.)^3^4
	Repeatability			Response time of 250 ms: ±2.5% of F.S.^3^5
Pressure specifications	Rated pressure			−100 kPa to +0.75 MPa * However, the flow rate cannot be measured in the range of −100 to −50 kPa.
	Overall accuracy			±2.0% of F.S.^*3
	Repeatability			Response time of 2.5 ms: ±0.4% of F.S.
Display resolution	Instantaneous flow			0.01/0.1 L/min
	Accumulated flow			0.01/0.1/1/10/100 L
	Pressure			0.1/1 kPa
Environmental resistance	Enclosure rating			IP65 (IEC60529)
	Ambient temperature			−10°C to +60°C 14 to 140°F (no freezing)
	Relative humidity			35%RH to 85%RH (no condensation)
	Vibration resistance			10 to 500 Hz, power spectral concentration: 0.816 G²/Hz, XYZ axes
	Shock resistance			100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Sensor unit (parts that do not contact the gas)			PBT/PAR/iron/Brass electroless nickel plating/POM/NBR/stainless steel
	Flow channel (parts that contact the gas)			PBT/Brass electroless nickel plating/NBR/nylon
Weight				Approx. 129 g 4.55 oz
^1 To ensure stable detection, it is recommended to use a pipe inner diameter that is at least equivalent to the inner diameter of this product. ^2 Gases that transmit ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^3 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the condition and type of pipes as well as the temperature and type of gas. ^4 This specification is valid when sufficient straight sections of pipe are provided and the flow velocity distribution is stable. This value does not take into account the effects of fluctuations in flow velocity distribution due to facility factors. ^*5 Accuracy improves with longer response times. As a rule, this is by a proportion of √(250 ms/response time)x.

Keyence SV2-075L2 Keyence

7,458.00 kr

Only 2 units left

Specifications

Model				SV2-075L2
General specifications	Capacity			750 W
	Input power supply	Voltage/frequency	Main circuit	3-phase (or single phase) 200 to 240 VAC +10 to -15%, 50/60 Hz 270 to 324 VDC ^*1
			Control circuit	Single-phase 200 to 240 VAC +10 to -15%, 50/60 Hz 270 to 324 VDC ^*1
		Allowable frequency fluctuation	Main circuit/control circuit	No more than ±5%
		Overvoltage category		III
	Control mode			Three-phase full-wave rectification, IGBT, PWM control, sine-wave current driving method
	Feedback			22-bit serial encoder (absolute) communication, fully closed control serial communication, analog feedback
	Operating environment	Operating atmosphere	Enclosure rating	IP20
			Pollution degree	Pollution degree: 2 (in an IP54 or higher control panel) However, usage under the following requirements required: • No corrosive gas or flammable gas present • No exposure to water, oil, or chemicals • No dust present
		Operating ambient temperature		-5 to +60°C 23 to 140°F (no freezing; reduced ratings at +55°C 131°F or more)
		Storage ambient temperature		-20 to +85°C -4 to +185°F (no freezing)
		Operating/storage ambient temperature		95% RH or less (no condensation)
		Altitude		2000 m 6561.7' or less above sea level (usable at reduced ratings at 1000 m 3280.8' or more)
		Vibration resistance		4.9 m/s² 16.1'/s² (JIS C60068-2-6 compliant)
		Impact resistance		19.6 m/s² 64.3'/s² ( JIS C60068-2-27 compliant)
		Other		No static electricity noise, strong electric fields, magnetic fields, or radiation present
	Min. insulation resistance			500 VDC, 1 MΩ or more with insulation resistance tester
	Applied standard	UL/CSA standards		UL61800-5-1, CSA22.2 No.274
		CE marking	Low-voltage directive	EN61800-5-1, EN50178
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Structure	Type		Attached to base mount
	Safety function			STO function (STO/EN61800-5-2)
	Safety function	Safety parameters		SIL3/EN61508, SIL CL 3/EN62061, PLe (Category3) / EN ISO13849-1: 2008
		Response time		8 ms (max.)
		Input		STO1, STO2: Base block signal for power module Internal impedance: 4.7 kΩ Operable voltage range: +24 V ±20% Max. delay time: 8 ms (Time from turning STO1, STO2 off until motor current cutoff)
		Output		EDM: Built-in safety circuit status monitoring (fixed output) Max. allowable voltage: 30 VDC Max. allowable current: 50 mA DC Max. voltage drop at ON: 1.5 V Max. delay time: 8 ms (Time from changing STO1, STO2 until EDM change)
		Applied standard		EN61800-5-2, EN ISO13849-1: 2008, EN61508, EN62061, EN60204-1, EN61326-3-1
	Protection function			Overcurrent, overvoltage, undervoltage, overload, regenerative abnormalities, etc.
	Insulation withstand voltage			1500 VAC or more (between primary side and ground) 3000 VAC or more (between primary side and secondary side) 350 VAC: Between secondary circuit and ground
	Weight			Approx. 1.6 kg
Power supply/current capacity and power loss	Main circuit power supply			Three-phase 200 V/Single phase 200 V
	Max. applicable motor capacity			750 W
	Power supply capacity for 1 amplifier			Three-phase 200 V: 1.6 kVA, Single phase 200 V: 1.9 kVA
	Output current	Continuous		5.5 Arms
		Max.		16.9 Arms
	Main circuit power loss			43.8 W
	Regenerative resistor power loss			8 W
	Control circuit power loss			17 W
	Total power loss			68.8 W
	Rated input current	Main circuit		Three-phase 200 V: 4.1 Arms, Single phase 200 V: 8.7 Arms
		Control circuit		0.2 Arms
	Rush current	Main circuit		34 A
		Control circuit
Performance specifications	Performance	Speed control range		1:5000 (load torque ≤ rated torque conditions)
		Speed fluctuation rate	At load fluctuation	±0.01% or less with load fluctuations of 0 to 100% (at rated rotation speed)
			At main circuit voltage change	0% with ±10% of rated voltage (at rated rotation speed)
			At ambient temperature change	±0.1% or less with ambient temperatures of 0 to +50°C 32 to 122°F (at rated rotation speed)
		Torque control accuracy (reproducibility)		±1%
		Speed frequency response frequency		2.6 kHz
	Dynamic brake			Operated at main circuit power supply OFF, servo alarm, limit switch detection (LSP/LSN), forced stop detection (FSTOP)
	Regenerative resistor			Built-in regenerative resistor: 50 W to 400 W ... not installed 750 W to 5.0 kW ... installed External regenerative resistor: OP-84399 (50 W to 1.0 kW) OP-87073 (1.5 kW ^*2)
	Display Function	Panel function		7-segment LED Rotary switch ×2 (16 ch) Slide switch ×1 (4 ch)
		Status display LED		CHARGE: For notification of main circuit power supply input (orange) POWER: For notification of control circuit power supply input (green) CONNECT: For notification of connection (green) LINK1, LINK2: For notification of MECHATROLINK communication (green)
	Auxiliary function			Gain control, alarm history, Z-phase search, etc.
I/O specifications	Sequence input signal	Number of inputs		7 (3 high-speed input, 4 general input)
		Max. input voltage		28.8 VDC
		Rated input voltage		24 VDC
		Min. ON voltage		19 VDC
		Min. OFF current/voltage		High-speed input: 0.6 mA, general input: 0.3 mA
		Common point mode		7 points/1 common point (1 terminal) (bidirectional)
		Input time constant		250 μs, 500 μs, 1 ms, 2.5 ms, 5 ms, 10 ms
		Input current		High-speed input: 4.5 mA, general input: 3.7 mA
		Input impedance		Approx. 4.7 kΩ
		Assignable input signals		Full signal assignment, logic-settable forced stop (FSTOP), external latch signals 1 to 3 (EXT1, EXT2, EXT3), origin return deceleration switch (DEC), forward limit switch (LSP), reverse limit switch (LSN), forward torque limit selection (PTL), reverse torque limit selection (NTL)
	Sequence output signal	Number of outputs		4
		Output mode		Transistor NPN output
		Rated load		30 VDC / 50 mA
		Leakage current when OFF		0.1 mA
		Residual voltage when ON		1.5 VDC or less
		Common point mode		Independent common
		Assignable output signals		Individual signal assignment excluding ALARM signal, logic-settable alarm (ALARM), in position (INPOS), speed matching (VCMP), zero speed detection (ZSP), operation preparation complete (RDY), torque limiting (TLM), speed limiting (VLM), electromagnetic brake timing (BRAKE), warning (WARN), Positioning proximity (NEAR)
	Analog Feedback Input signal monitor	Max. input voltage		±12 V
		Accuracy		±1% of F.S.
		Resolution		±10 bits
		Input impedance		30 kΩ
	Encoder division pulse output signal	Output mode		Phase A (A+/A−), phase B(B+/B−), phase Z (Z+/Z−): Differential line-driver output
		Line driver		SN75ALS174 (T.I.) or equivalent
		Output frequency		1.6 Mbps (with 2-phase, 4 times multiplication, 6.4 MHz or equivalent) ^*3
	Analog monitor output	No. of channels		2 ch
		Output range		±10 V (linearity valid range ±8 V)
		Resolution		16 bits
		Conversion precision		±20 mV (typ.)
		Max. allowable load current		±10 mA
		Conversion speed		1.2 ms (typ.)
Communication specifications	MECHATROLINK-III communication	Communication protocol		MECHATROLINK-III
		Station address		03H to EFH (Max. number of connectable slaves: 62)
		Transmission speed		100 Mbps
		Transmission frequency		125 μs, 250 μs, 500 μs, 750 μs, 1 to 4 ms (in multiples of 0.5 ms)
		Communication cycle		Support for values starting at transmission frequency × 1
		Number of transmitted bytes		32 bytes/station, 48 bytes/station (selectable with slide switch)
		Transmission media/cable		Category 5e-compliant, STP cross cable
		Operating specifications		Position control / speed control / torque control
		Command input		MECHATROLINK-III command (sequence, motion, monitor, adjustment, etc.)
		Max. transmission distance		50 m 164.0' ^*4
	USB communication	Connected device		PC
		Communication standard		USB 2.0-compliant
		Function		Status display, parameter setting, tuning, etc.
^1 When using a DC power supply input, set “AC/DC power supply” to “DC”. ^2 Use of 2 kW, 3 kW, and 5 kW servo amplifiers is possible depending on the operating conditions. ^3 The division ratio can be set arbitrarily with a parameter. ^*4 For instances with 30 m 98.4' or more, use ferrite cores (OP-84409) with 2 turn-winding.

Keyence CL-L030 Keyence

0.00 kr

Sold Out

Specifications

Model				CL-L030 ^*1
Type				Sensor head (30 mm ・Quad type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence DX-UC1M Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LS-5040 Keyence

53,732.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GP-M001 Keyence

7,326.00 kr

Only 8 units left

Specifications

Model			GP-M001
Rated pressure			-14.50 to +14.50 PSI (-100 to +100 kPa)
Possible display range			-17.40 to +17.40 PSI (-120.0 to +120.0 kPa)
Zero-cut pressure value			±0.5% of F.S.
Burst pressure			217.5 PSI (1500 kPa)
Display resolution	kPa		0.1
	MPa		None
	PSI		0.01
	bar		0.001
	kgf/cm²
Fluid type			Gas or liquid that will not corrode the liquid contact part
Type of pressure			Gage pressure
Precision			±1.0% of F.S. or less^*1
Repeatability			±0.3% of F.S. or less^*2
Temperature characteristics			±0.6% of F.S./10°C 50°F
Connection port			G3/4 (Changes to the R male 1/8, R male 1/4, R male 3/8, G female 1/4, NPT male 1/8, and NPT male 1/4 option adapters are available.)
Box rotation angle			Maximum 330°
Medium temperature			-20 to +100°C -4°F to +212°F (no freezing/condensation)^*3
Power voltage			10-30 VDC, Ripple (P-P): 10% max, Class 2 or LPS
Current consumption			50 mA or less (when 24 V: 32 mA or less, when 12 V: 48 mA or less. Not including load)^*4
Display method			4 column, digital LED, red/Vertical inversion display possible
Operation display light			Operation indicator (output 1) (orange), Operation indicator (output 2) (orange)
Hysteresis			During hysteresis mode: variable (Difference between switch-on point and switch-off point is hysteresis) During window mode: fixed (0.5% of F.S.)
Response	Control output		Selectable from 3 to 5000 ms
	Analog output		As above + 2 ms (90% response)
Output	Output 1 control output		NPN/PNP open collector (Selectable), Max. 250 mA (30 V max) Main unit residual voltage 1 V max, N.O./N.C. selectable
	Output 2 replacement type	Control output
		Analog output	4-20 mA, maximum load resistance 500 Ω (When the electric voltage is more than 20 V)^*5
Environmental resistance	Enclosure rating		IP67
	Pressure resistance		400 kPa (4 bar)
	Ambient temperature		-20 to +80 °C -4 to 176 °F (No freezing and no condensation)
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		IEC60068-2-6 20 G (10 to 2000 Hz, 2 hours each in the X, Y, and Z axis)
	Shock resistance		IEC60068-2-27 50G (11 ms, 3 times for each of X, Y and Z direction)
Material properties	Wetted part		Pressure port: SUSXM7, Diaphragm pressure port: Al₂O₃ (Alumina), O ring: FKM
	Other parts		Housing metal portion: SUS304, SUS303, Housing plastic portion: PPSU, Air hole: PTFE, nickel-plated brass.
Applicable cable			M12 connector 4 pin
Weight			Approx. 150 g
^1 This is the value when considering linearity + hysteresis + repeatability in a stable environment of 23°C 73°F. ^2 The repeatability, based on consistent conditions, is the variation in the value that will be displayed. ^3 When the temperature of the piping exceeds 80°C 176°F, do not connect the cable. ^4 Consumption current including output is 0.6 A and under. ^*5 The maximum load resistance R will be the values below in response to the electric voltage E. When 10-23V: R = ｛38 x (E-10) + 128｝ Ω When 23-30V: R = 622 Ω

Keyence CA-DRR5 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GS-H01 Keyence

5,815.00 kr

Only 3 units left

Specifications

Model				GS-H01
Weight				Approx. 1070 g

Keyence SJ-H204A Keyence

16,571.00 kr

Only 1 unit left

Specifications

Model		SJ-H204A
Type		HA
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method/applied voltage		Pulse AC method, ±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or contact point signal without voltage
Control output		NPN photo relay, Maximum 100 mA max. (40 V or less)
Major functions		Condition alarm, ion level alarm, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*2
Effective length		2040 mm 80.31" ^*3
No. ofelectrodes		32
Static elimination bar length		2000 mm 78.74"
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	500 mA (at 24 V), 350 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main unit	ABS/PC
Weight	Static elimination bar	2000 g 70.55 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" (22 Hz), 600 mm 23.62" (10 Hz), 1500 mm 59.06" (1 Hz) Operating ambient temperature: 0 to +40°C 32 to 104°F Operating ambient humidity: 35 to 65% RH 0.3 m/s 1.3'/s downflow ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence AP-C33W Keyence

0.00 kr

Sold Out

Buy the Keyence AP-C33W - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence AP-C33W is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence OP-88003 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-3107 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-3107
Overview				Teflon cap with M14 inner diameter. Protect from weld spatter.
Applicable product				EH-114
Material				PTFE