Vision Systems

Keyence CV-X270A Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88218 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence BL-500H Keyence

14,399.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XM-P2000 Keyence

0.00 kr

Sold Out

Specifications

Model		XM-P2000 ^*1
Type		Probe
Marker	No. of markers	12
Housing material	Marker body	Quartz glass
	Probe housing	PBT plastic
Light source		Near-infrared LED (870 nm)
Applicable stylus		M5 (Commercially available styluses can be used)
Camera		Compact CMOS image sensor
Status LED		Green: Measurement possible Red: Measurement impossible Off: Not selected
Weight		Approx. 500 g (including cable)
^*1 Included with XM-2000, XM-T2000, XM-2200, and XM-T2200 models.

Keyence VHX-S660E Keyence

0.00 kr

Sold Out

Specifications

Model		VHX-S660E
XYθ stage	XY stage: Motorized/Manual	Motorized
	XY-stage movement range	±50 mm ±1.97"
	XYθ stage size	Top surface: 233 × 185 mm 9.17" × 7.28" (Center disc: ø168 ø6.61")
	Transmitted lighting	Provided
Z stage	Z stage: Motorized/Manual	Motorized
	Z-motorized stage motor	5-phase stepping motor
	Z-motorized stage travel speed	17 mm 0.67"/sec (max)
	Z-stage movement range	49 mm 1.93"
Load capacity		5 kg
XYθ stage	XY-motorized stage motor	2-phase stepping motor
	XY-motorized stage resolution	1 µm (typ.)
	XY-motorized stage movement speed	20 mm 0.79"/sec (max.)
Z stage	Z-motorized stage resolution	0.1 µm (typ.)
Power supply	Power voltage	100 to 240 VAC, 50/60 Hz
	Power consumption	60 VA
Environmental resistance	Ambient temperature	+5 to +40 °C 41 to 104 °F
	Relative humidity	35 to 80 % RH (No condensation)
Weight		Approx. 20 kg

Keyence OP-25431 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-25431
Type				Fittings
Overview				Mounting bracket for FSｰT1/M1 and PS-T1.
Applicable product				FSｰT1/M1/V11/V21, PS-T1, AP-V41, LV-11S, ES-M1/M2
Material				Polyacetal

Keyence OP-87984 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XG-H200C Keyence

18,622.00 kr

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence RK-10IM Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence TM-X5120 Keyence

0.00 kr

Sold Out

Specifications

Model			TM-X5120
Transmitter/receiver distance			436.7 mm 17.19"
Measuring range	Field of view	High-accuracy measurement area	ø60 mm ø2.36"
		Measurement area	ø124 mm ø4.88"
	Depth of field	High-accuracy measurement area	20 mm 0.79"
		Measurement area	40 mm 1.57"
Exposure time			25/50/100 μs (Adjustable 3-stage)
Imaging time (Trigger interval)			Approx. 24 ms (at “Full” vertical/horizontal measurement range sizes) Approx. 3 ms (at “4/16” vertical/horizontal measurement range sizes)
Light source			InGaN green LED
Measurement position accuracy	High-accuracy measurement area		±2.5 μm ±0.000098" ^*1
	Measurement area		±3.5 μm 0.000138" ^*1
Repeatability			±0.2 μm ±0.000008" ^*2
Pixel resolution			Approx. 66 μm 0.002598"
Environmental resistance	Enclosure rating		IP64 ^*3
	Ambient temperature		0 to +45°C 32 to 113°F
	Relative humidity		85% RH or less (No condensation)
Material			Aluminum/PBT
Weight			Transmitter: Approx. 5900 g 13.01 lb Receiver: Approx. 7900 g 17.42 lb Base: Approx. 4300 g 9.48 lb
^1 Error when measuring width of KEYENCE standard object (glass calibration scale). ^2 Average value of ±2σ measuring the width of a KEYENCE standard object (glass calibration scale) 16 times in the center of the measurement area. ^*3 Excluding connectors and cable boxes.

Keyence FU-95Z Keyence

6,309.00 kr

Only 8 units left

Specifications

Model		FU-95Z
Type		Liquid-level detection fiber unit
Detecting method		Pipe mounting type
Mounting transparent tube diameter		ø4 to 26 mmø0.157" to 1.024"
No. of beam axes		1 mm0.039"
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.0×2
Minimum bend radius		R2 mm0.079" Tough-Flex
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F
Accessories		Binding band × 2, nonslip rubber × 2, spacer × 2, screw × 2, nut × 2
Weight		Approx. 7 g

Keyence SJ-M040 Keyence

7,690.00 kr

In stock, 12 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FS-N11N Keyence

1,462.00 kr

In stock, 34 units

Specifications

Model		FS-N11N
Type		Standard 1 output Cable
Output		NPN
Main unit/expansion unit		Main unit
Control output		1 NPN open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
Monitor output (1-5 V)		-
External input
Light source LED		Red, 4-element LED
APC		ON/OFF switchable (Factory setting: OFF)
Response time		50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Number of interference prevention units		0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Unit expansion		Up to 16 units can be connected total (two output type is treated as two units)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current Consumption	Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)^1 Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)^1 Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
	Ambient temperature	-20 to +55 °C -4 to +131 °F (No freezing)^*2
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Both main unit and expansion unit housing material: Polycarbonate
Weight		Approx. 75 g
^1 Increases 100 mW (4.0 mA) for High Speed mode ^2 One or two more units connected: -20 to +55 °C (-4 to +131 °F); 3 to 10 more units connected: -20 to +50 °C (-4 to +122 °F); 11 to 16 more units connected: -20 to +45 °C (-4 to +113 °F). When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.

Keyence KV-10AR Keyence

4,411.00 kr

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-56TZ Keyence

9,071.00 kr

Only 5 units left

Specifications

Model		FU-56TZ^*1
Type		fibre unit
Shape		Thrubeam
Minimum bend radius		R2 mm
Minimum detectable object		Opaque material with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-40 to +50 °C -40 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 20 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence KV-SSC02 Keyence

13,802.00 kr

Only 6 units left

Specifications

Model		KV-SSC02
Type		High-speed counter unit
Input frequency		Single phase 4 MHz (16 MHz during 2-phase, 4-multiplication)
Counting range		32 bits
Number of channels		2 ch
Mode	Input selection	External terminal (CH0, CH1), internal clock (0.05 μs, 1 μs, 10 μs, 100 μs), other CH coincidence output, communication: EnDat2.2/22, BiSS (C-mode), YASKAWA serial
	Input mode	1-pulse with/without direction, 2-pulse addition/subtraction operation, 2-phase 1-multiplication/2-multiplication/4-multiplication
	Counting operation mode	• Up-down counting mode • Enable counting mode • Preset counting mode • Set timer counting mode • Enable accumulative counting mode
	Counting mode	Linear, ring
	Frequency, revolution counter operation mode	• Frequency counting mode • Revolution counter B mode (1-revolution time measurement) • Revolution counter A mode (pulse interval measurement)
Input	Count input	A-phase/B-phase/Z-phase (preset), 3 points for each channel, 6 points in total 5/12/24 VDC input possible, line driver input possible, photocoupler insulation
	Control input	Enable (also used for input capture) input, 1 point for each channel, 2 points in total 12 to 24 VDC input possible, photocoupler insulation Input capture input, 2 points for each (4 points in total) 12 to 24 VDC input possible, photocoupler insulation
Output	Comparator coincidence output	2 points for each channel, 4 points in total, photocoupler insulation Rated load: 30 VDC, 0.2 A or less
Input capture function		By external input (max. 4 points)
Buffering function		Buffering period: 1 μs or more
Input filter function		Input time constant switching (6 types of counting/9 types of control)
Preset function		Possible to select from preset (Z-phase) input and internal relay-based rising edge/falling edge/level (only when an external input is used)
Serial encoder communication function	Supported encoder	Absolute encoders that support EnDat2.2/22, BiSS (C-mode), and YASKAWA serial
	Communication cycle	EnDat2.2/22: 50 μs, BiSS (C-mode): 50 μs, YASKAWA serial: 62.5 μs
	Input	Equivalent to a differential line receiver that meets the EIA RS485 standard
	Output	Equivalent to a differential line driver that meets the EIA RS485 standard
	Encoder 5 V power	5 VDC (±5%), 300 mA or less
Others		Unit interrupt, inter-unit synchronization
Internal current consumption		190 mA or less
Weight		Approx. 130 g

Keyence CA-DBB8 Keyence

0.00 kr

Sold Out

Specifications

Model				CA-DBB8
Type				Bar Light
LED color				Blue
Diffusion plate				OP-87042
Polarizing plate				OP-87043
Power consumption				4.8 W
Input voltage				12 VDC
Weight				Approx. 60 g

Keyence SV2-D20AG Keyence

0.00 kr

Sold Out

Specifications

Model				SV2-D20AG
Type				Motor power cable, Hi-flex robotic cable with electromagnetic brake
Length				20 m 65.6'
Note				for 50 W / 100 W motor

Keyence GS-71P10 Keyence

4,782.00 kr

Only 5 units left

Specifications

Model			GS-71P10
Lock type			Power-to-lock type
Type			Standard type
Response time	Lock	Lock→Unlock	320 ms^1^2
		Unlock→Lock	220 ms^1^2^*3
Lock	Locking force (Fzh)		Min. 2,000 N
	Alignment tolerance of lock		±2 mm ±0.08"
	Mechanical life-span		1 million cycles or more (with door operation speed of 1 m/s)
	Acceptable operation frequency		1 Hz^*4
	Door radius		Min. 250 mm 9.84"
	Auxiliary release		Front, back ^*5
Cascading			Max. 25 units
Control output (OSSD output)	Output		Transistor outputs × 2
	Max. load current		Max. 150 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
	OFF state voltage		Max 2.0 V (with a cable length of 5 m 16.40')
	Leakage current		Max. 0.5 mA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
AUX (Non-safety related output)	Output		Transistor output
	Number of outputs		1
	Max. load current		50 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
External input (Short-circuit current)	Safety input		Approx.1.5 mA × 2
	Reset/EDM input		-
	Lock control input		Approx. 2.5 mA × 1
	OSSD operation switching input		-
Applicable Standards (Safety)			EN 61508, IEC 61508(SIL2/SIL3) EN 62061, IEC62061(SIL CL2/SIL CL3) EN ISO13849-1: 2015(PLd, Category 2/PLe, Category 4) EN ISO14119(Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
Protection circuit			Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage		24 V DC ±20 % (Ripple P-P 10 % or less, Class2)
	Power consumption		3.4 W^*6
Environmental resistance	Enclosure rating		IP65/67(IEC60529), IP69K(ISO 20653) (TÜV SÜD certified), Enclosure Type 3/4X/12/13 (NEMA250)
	Operating ambient temperature		-20°C to +55C° -4°F to 131°F (No freezing)
	Operating relative humidity		5% to 95%RH
	Storage temperature		-25°C to +70°C -13°F to 158°F (No freezing)^*7
	Storage relative humidity		5% to 95%RH
	Vibration resistance		10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance		30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Sensor main unit	Case	SUS304, PPS, PBT, PAR, PA66, NBR
		Lock	Aluminum alloy, Zinc die cast (Nickel chrome plating)
		Cable	PVC
	Actuator	Case	PPS, PBT, NBR
		Lock	Aluminum alloy, SUS303
Weight			Approx. 770 g
^1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). ^2 If the OSSD operation is open/close link mode, Detect→ Not detect: 20 ms + 2 ms × (number of units cascaded -1), Not detect → Detect: 30 ms + 25 ms × (number of units cascaded -1) ^3 430 ms when locked at the same time the actuator is detected. ^4 Acceptable door operation frequency is 3 Hz if the OSSD operation is open/close link mode. In that case, operation distance is Sao(OFF→ ON) = 3 mm 0.12", Sar(OFF→ ON) = 10.5 mm 0.41". ^5 Do not apply excessive torque (0.45N·m or higher). ^6 Power consumption temporarily increases (Max. 10.5 W, Approx. 0.2 s) when the lock control input(s) is(are) turned ON. After that, current consumption will be within the specification. ^*7 When stored for a long period of time, please store it at a temperature of 55°C 131°F or lower.

Keyence OP-88100 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88100
Type				Vertical Mounting Bracket
Applicable product				AI-H010, AI-H020
Note				Short range, for Separate amplifier models

Keyence KV-NC32ET Keyence

12,645.00 kr

Only 4 units left

Specifications

Model			KV-NC32ET
Expansion output unit	External connectionmethod		MOSFET (With overcurrent protection function)^1^2
	External connection method		Connector
	Rated load		30 VDC. 0.2 A ^*3
	Leakage current (when output is OFF)		100 μA or less
	Residual voltage (at ON)		0.6 VDC or less
	ON resistance		−
	Common method		32 points/1 common (2 terminals)^4^5
	Response time	OFF to ON	100 μs or less (with a load of 1 mA or more)
		ON to OFF	200 μs or less (with a load of 1 mA or more)
	Relay life		−
	Relay replacement
Internal current consumption			50 mA or less
Weight			Approx. 110 g
^1 If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common (The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 015 or 100 to 115 for the KV-NC32ET(P).) , until the cause of the problem is removed. ^2 MOSFET (N-ch) output for the sink output type; and MOSFET (P-ch) output for the source output type. ^3 The rated load per common terminal is 1.6 A for the KV-NC16ET(P) or KV-NC32ET(P) and 3.2 A for the KV-NC16ET(P)E. ^4 The COM terminals of the KV-NC16ET(P), KV-NC16ET(P)E and KV-NC32ET(P) are shorted internally. ^*5 The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 015 or 100 to 115 for the KV-NC32ET(P).

Keyence LS-5501 Keyence

78,519.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XG-8002P Keyence

13,435.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PX-H61 Keyence

3,705.00 kr

Only 5 units left

Specifications

Model		PX-H61
Type		M12 Reflective Standard
Light source LED		Red 4-element LED (Wavelength：635 nm)
Detecting distance	TURBO	400 mm 15.7"
	SUPER	600 mm 23.6"
	ULTRA	1200 mm 47.2"
	MEGA	2000 mm 78.7"
Detectable object		―
Spot diameter		Approx. 15 x 15 mm 0.59" at 100 mm 3.94" Approx. 65 x 65 mm 2.56" at 500 mm 19.69"
Environmental resistance	Enclosure rating	IEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69K
	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Case material		Housing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7
Accessories		Screw nut x 2, toothed washer x 1
Weight		Approx. 80 g^*1 (Including cable)
^*1 The PX-H71G, H72G and H61G have SUS304 spiral protective tube on the cables.