Vision Systems

Keyence KV-E8TP Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PR-FB15CP Keyence

2,081.00 kr

Only 9 units left

Specifications

Model		PR-FB15CP
Type		Reflective (Background suppression)
Output		PNP
Shape		Flat
Cable connection		M8 connector (4 pin)
Detection distance		1 to 15 mm 0.04" to 0.59"
Number of control outputs		2
Output operation	Output 1	Light-ON
	Output 2	Dark-ON
Response time	Output 1	0.5 ms
	Output 2	ON→OFF: 2.7 ms, OFF→ON: 0.5 ms
Sensitivity adjustment		None
Spot diameter		Approx. 2.5 x 4.5 mm (at 15 mm)
Light source		4 element, point light source, red LED (650 nm)
Mutual interference prevention function		4 sensors
Indicator lamp		Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)
Control output		30 VDC or lower, 50 mA or lower Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.
Protection circuit		Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %
	Current consumption	19 mA
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)
	Insulation resistance	20 MΩ or higher (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower
	Ambient temperature	-25 to +55 °C -13 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin
Accessories		Instruction Manual
Weight		Approx. 10 g

Keyence GL-RA1120 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-RA1120
Type				Front Protection Cover
Overview				Plastic cover that is used to protect the detecting surface.
Applicable product				GL-R111F,GL-R56H,GL-R28L
Number included				1 unit
Material				Frame: ABS, Transparent parts: Polycarbonate
Weight				Approx. 105 g

Keyence BL-1351HA Keyence

7,210.00 kr

Only 10 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence WI-C5R Keyence

0.00 kr

Sold Out

Specifications

Model				WI-C5R
Type				Sensor head connecting cable, Hi-flex robotic
Cable end				Straight
Length				5 m 16.40'

Keyence CA-LH35 Keyence

2,666.00 kr

Only 5 units left

Specifications

Model				CA-LH35
Focal point				35 mm 1.38"
F-stop range (aperture)				F2.0 to F16
Minimum WD				0.2 m 0.7'
Mount				C-mount
Filter size				27.0 mm 1.06" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.2 % (-0.05 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 69 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence FD-GP1 Keyence

0.00 kr

Sold Out

Specifications

Model				FD-GP1
Material				SUS304 Polycarbonate
Weight				Approx. 180 g

Keyence OP-88092 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88092
Type				Ethernet extension cable (M12)
Length				20 m 65.62'
Weight				Approx. 1,280 g

Keyence CA-D02XE Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CB-B10E Keyence

15,458.00 kr

Only 5 units left

Specifications

Model		CB-B10E^*1
Type		Head extension cable
Cable min. bending R		22 mm 0.87"
Cable length		10 m 32.8'
Environmental resistance	Enclosure rating	IP67 (IEC60529)^*2
Material		PVC
Weight		Approx. 800 g
^1 Regarding cable extension between the head and controller: Up to 2 cables can be connected with the CB-BxxE, and these cables should be kept to a total length of 30 m 98.4' or less. ^2 This value is from a case in which the sensor head has been connected. However, the controller side connector is not included.

Keyence CA-LF43 Keyence

0.00 kr

Sold Out

Specifications

Model				CA-LF43
Type				Protective filter
Note				For 43 mm 1.69" diameter screws

Keyence FD-XC20R4 Keyence

5,071.00 kr

Only 5 units left

Specifications

Model				FD-XC20R4
Supported diameter				Outer diameter of pipe: 1/2 " (12.7 mm) Attachable range: ø 12.2 to 13.2 0.48 " to 0.52 "
Weight				Approx. 80 g

Keyence CA-MN81 Keyence

12,549.00 kr

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DV-90N Keyence

17,964.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-X1000C Keyence

0.00 kr

Sold Out

Specifications

Model		MD-X1000C^*1
Type		Marking unit (controller + head) 13 W Standard area
2D code reader add-in (sold separately)		MD-XAD1/MD-XAD1A
Console (sold separately)		MC-P1
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)^*2
	Wavelength	1,064 nm
	Output	13 W
Q-switch frequency		CW (continuous wave), 1 to 400 kHz
Guide laser/Working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)^*2
Marking area		125 x 125 x 42 mm 4.92" x 4.92" x 1.65"
Standard working distance (±variable width)		189 mm (±21 mm) 7.44" (±0.83")
Marking resolution		2 µm
Scan speed		Max. 12,000 mm/s 472.44"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font^*3
	Barcode	CODE39, ITF, 2of5, NW7 (CODABAR), JAN, CODE128, EAN, UPC-A, UPC-E
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC‐A
	Logo image	Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary marking, Moving marking (constant, encoder)
	Character size (marking height/width)	0.1 to 125 mm 0.004" to 4.92"
	No. of registered programs	2,000 max.
	No. of program blocks	256
I/O (Input/output)		Terminal block I/O, MIL connector I/O, contactor control I/O^*4
Interface		RS-232C, USB 2.0, Ethernet (100BASE-TX/10BASE-T)^*5
Head installation direction		All directions
Head cable length		4.3 ±0.1 m 0.17" ±0.01"
Cooling method		Forced air cooling
Rated voltage and power consumption		100 to 120/200 to 240 VAC ±10 %, 50/60 Hz, 650 VA max.
Environmental resistance	Enclosure rating	IP64 (marking head)
	Pollution degree	2
	Overvoltage category	II
	Ambient temperature for storage	-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature	0 to +40 °C 32 to 104 °F
	Ambient humidity for storage	30 to 85 % RH (No condensation)
	Relative humidity
Weight		Controller: 23.0 kg Head: 13.6 kg Console: 2.0 kg
^1 Type equipped with a contactor control terminal block. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel]. ^4 Supported models: MD-X1000C, MD-X1020C, MD-X1500C, MD-X1520C ^*5 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX). The Ethernet port supports communication with Marking Builder 3 (ActiveX), TCP/IP communication, EtherNet/IP™, and PROFINET.

Keyence FR-S01 Keyence

5,343.00 kr

Only 5 units left

Specifications

Model		FR-S01
Type		Short range Standard model
Measuring range		Up to 1.5 m 4.9'^*1
Display range		Up to 2 m 6.6'^*1
Measurable dielectric constant of medium		2 or higher^*2
Resolution		1 mm 0.04"
Precision		Up to 0.1 m 0.3': ±20 mm 0.79"; 0.1 to 0.3 m 0.3' to 1.0' : ±5 mm 0.20"; 0.3 to 1.5 m 1.0' to 4.9' : ±1 mm 0.04" ^*3
Response time		0.4 s, 1.5 s, 4 s (default value), 10 s
Tank pressure		-0.1 to +1 Mpa
Material	Tank interior	Lens: PTFE Internal packing: FKM Joint: SUS304
	Housing	PBT PAR
Connection diameter		G3/4 (20 A)
Output	No. of control outputs	Maximum 5
	Control output/auxiliary output	NPN/PNP open collector (switching type) 30 VDC or less, max 50 mA for each Residual voltage of 1.4 V or less (50 mA or less) N.O./N.C. Switching type IO2 is switchable to IO-Link IO5 is switchable to external input
	Analog output	0–20 mA/4–20 mA maximum load resistance 260 Ω (Response time: 0.2 s after judgment output is confirmed [90% response])
External input		Short-circuit current: 1.5 mA or less Input time 500 ms or more
Network compatibility		IO-Link v1.1/COM2
Analog output accuracy	Resolution	1 mm 0.04"^*4
	Zero accuracy	±0.1 mA (zero point = 4 mA)^*4
	F.S. accuracy	±0.2 mA (full-scale = 20 mA)^*4
Power supply	Power voltage	24 VDC + 25%/–20% Including ripple Class 2 or LPS
	Power consumption	80 mA or less (Excluding Load Current)
Environmental resistance	Ambient temperature	−20°C to +55°C^5^6 -4°F to +131°F (no freezing)
	Relative humidity	Up to 85% RH (no condensation)
	Temperature of coupling used	–20 to +85°C -4°F to +185°F (no freezing)^5^6
	Vibration resistance	10–500 Hz Power spectral density: 0.816 G²; X, Y and Z directions
	Shock resistance	100 m/s² (10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Enclosure rating		IP67 (IEC60529)
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent protection, and output surges
Weight		Approx. 170 g 6.00 oz
^1 Guaranteed value in water with the recommended installation. Static water can be measured up to the edge of the lens. An undetectable area on the short-range side is created due to the environment and measurement medium. The maximum measuring distance is also shortened. ^2 Measurement may not be possible depending on the shape and environment of the target. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement errors may occur depending on the customer’s environment. ^4 This is the guaranteed value from verification performed at KEYENCE inspection facilities with a load resistance of 250 Ω. Measurement errors may occur depending on the customer’s environment. ^5 The FR-S01 and FR-LM20L/LP20L can be used up to an ambient temperature setpoint of 10°C 50°F by selecting “Off when not in Operation” under “Screen Brightness.” ^6 When performing SIP with the FR-LS20L, do so for 1 hour or less with an ambient temperature of 40°C 104°F or less and an internal system temperature of 130°C 266°F. When performing SIP with the FR-S01/LM20L/LP20L, turn the power supply off, and then perform this operation for 1 hour or less with an ambient temperature of 40°C 104°F or less and an internal system temperature of 130°C 266°F. In addition, always install the KEYENCE optional ferrule mounting bracket and internal gasket.

Keyence OP-89155 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-HX200C Keyence

15,787.00 kr

In stock, 12 units

Specifications

Model		CA-HX200C
Image element		Color CMOS image receiving element, 16× high-speed reading using square-pixel, Unit cell size: 5 µm × 5 µm 0.20 Mil × 0.20 Mil
Valid pixel count		1.92 M pixels, 1600 (H) × 1200 (V)
Image size		Equivalent to 2/3 "
Scanning system		Progressive 11.6 ms^1, 20.2 ms^2
Pixel transfer frequency		195 MHz (×16 speed) ^1 130 MHz (×11 speed) ^2
Electronic shutter		Can be set to 0.01 to 100 msec by specifying the following numerical inputs: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 1/50000, 1/100000
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (no condensation)
Camera cable		High-speed camera cable CA-CHxx
Weight		Approx. 280 g (not including lens)
^1 When using the CV-X400 or CV-X200 Series with the CA-EC80HX/EC80L ^2 When the camera input unit CA-EC80 is used with a CV-X100 Series controller or with a CV-X200 Series controller

Keyence FS-V34CP Keyence

0.00 kr

Sold Out

Specifications

Model		FS-V34CP
Type		2-output with M8 connector
Output		PNP
Main unit/Expansion unit		Expansion unit
Control output		2 outputs
Monitor output (1 to 5 V)		N/A
External input
Connector		M8
Light source LED		Red, 4-element LED (Wavelength: 640 nm)
Response time		33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)
Output selection		LIGHT-ON/DARK-ON (switch-selectable)
Display indicator		Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P, Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Size		30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)
Detection mode		Light intensity (area detection possible, automatic sensitivity-tracking function provided)/ [Limited light intensity/Count check/Abnormality detection]
Timer function		OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output		PNP open-collector 24 V, 100 mA max.^*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy		Input time: 2 ms (ON)/20 ms (OFF) min.^*2
Unit expansion		Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Number of interference prevention units	Normal operation	HIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Power consumption	Normal: 830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/ Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V, 32 mA max.)^*3
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Polycarbonate
Accessories		N/A
Weight		Approx. 22 g
^1 Total current of two outputs should be less than 100 mA. ^2 Only available on certain models. ^3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA). ^4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Keyence OP-87953 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87953
Type				LAN cable
Length				10 m 32.81'
Weight				Approx. 600 g

Keyence OP-88772 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence RC-16 Keyence

14,314.00 kr

Only 4 units left

Specifications

Model		RC-16
Type		1-level preset counter, DC type
Function selection		-
Operation method		Addition, subtraction, addition and subtraction (phase difference)
Operation mode		Overcount, auto reset, range distinction
Return method		Manual reset, external reset, automatic reset (in auto reset mode)
Display power		7-segment LCD (character height: 8.5 mm 0.33")
Number of digits		6-digit display (zero suppression method), -99,999 to 999,999
Power off memory time		Approx 10 years (at 20°C 68°F)
Timer accuracy		-
Mounting method		Panel mount (embedding), surface mount, DIN rail mount
Highest counting speed		With contacts: 30 c/s, without contacts: 1 kc/s (1:1 ON:OFF ratio)
Input signal		No-voltage input (with contacts, without contacts [count input, inhibit input, reset input])
Output	Control output	Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less^*1
Control output	Relay	Relay output: 20 ms or less (when set to 30 c/s), 5 ms or less (when set to 1 kc/s); Open-collector output: 15 ms or less (when set to 30 c/s), 2 ms or less (when set to 1 kc/s)
DC output		-
Rating	Power voltage	12 to 24 VDC ±10 %
	Power consumption	-
	Current consumption	45 mA or less
Noise resistance		Square wave noise generated by a noise simulator, between the power supply terminals, 1.2 kV for 1 µs
Environmental resistance	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 75 g
^*1 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter.

Keyence GL-R16H-T Keyence

12,230.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AP-C30W Keyence

3,595.00 kr

Only 5 units left

Buy the Keyence AP-C30W - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence AP-C30W is a direct drop-in replacement for existing installations and ships ready for integration.