Machine Vision Systems

1,447.00 kr

In stock, 23 units

Specifications

Model		FS-N12N
Type		Standard 1 output Cable
Output		NPN
Main unit/expansion unit		Expansion unit
Control output		1 NPN open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
Monitor output (1-5 V)		-
External input
Light source LED		Red, 4-element LED
APC		ON/OFF switchable (Factory setting: OFF)
Response time		50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Number of interference prevention units		0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Unit expansion		Up to 16 units can be connected total (two output type is treated as two units)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current Consumption	Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)^1 Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)^1 Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
	Ambient temperature	-20 to +55 °C -4 to +131 °F (No freezing)^*2
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Both main unit and expansion unit housing material: Polycarbonate
Weight		Approx. 45 g
^1 Increases 100 mW (4.0 mA) for High Speed mode ^2 One or two more units connected: -20 to +55 °C (-4 to +131 °F); 3 to 10 more units connected: -20 to +50 °C (-4 to +122 °F); 11 to 16 more units connected: -20 to +45 °C (-4 to +113 °F). When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.

Keyence MD-H9810W Keyence

0.00 kr

Sold Out

Buy the Keyence MD-H9810W - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence MD-H9810W is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence CA-LM0210 Keyence

14,643.00 kr

Only 7 units left

Specifications

Model		CA-LM0210^*1
Optical magnification		x0.25 to x1.0
WD (at reference magnification)	×0.25	238 mm 9.37"^*2
	×0.50	137 mm 5.39"^*2
	×0.75	105 mm 4.13"^*2
	×1.0	88 mm 3.46"^*2
Compatible image sensor size		1"
Field of view (at reference magnification)		2/3"： 6.6 x 8.8 mm to 26.4 x 35.2 mm 0.26" x 0.35" to 1.04" x 1.39", 14.3 mm 0.56" line camera： 14.3 mm to 57.3 mm 0.56" to 2.26", 1"： 9.6 x 12.8 mm to 38.4 x 51.2 mm 0.38" x 0.50" to 1.51" x 2.01"
F-stop range (aperture)		F6 to F64 (F-stop: F2.8 to F32)
Telecentricity		-
Filter size		46.0 mm P0.75 1.81"
Resolution	×0.25	16.8 µm 0.66 Mil^*3
	×0.50	8.4 µm 0.33 Mil^*3
	×1.0	4.2 µm 0.17 Mil^*3
TV distortion (Max.)	×0.25	-0.11 %
	×0.50	0.03 %
	×1.0	0.01 %
Depth-of-field	×0.25	20.48 mm 0.81"^*4
	×0.50	5.12 mm 0.20"^*4
	×1.0	1.28 mm 0.05"^*4
Mount		C-mount
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	80% RH or less (No condensation)
Weight		Approx. 640 g
^1 When installing the macro lens (CA-LMxx) to the line scan camera, make sure to secure the lens unit with the dedicated mounting stand (OP-87337, sold separately) or an equivalent mount. ^2 WD indicates a working distance at reference magnification. WD will vary depending on magnification adjustment. ^3 The smallest resolvable feature that can be detected using 550 nm wavelength light. ^4 Depth-of-field applies to an F-stop of 16 and will vary depending on F-stop setting. The indicated depth-of-field is a theoretical value that assumes 1/2" image sensor size and a horizontal resolution of 320 lines. (Circle of least confusion is 40 µm 1.57 Mil in the image)

Keyence DX-BC6 Keyence

0.00 kr

Sold Out

Specifications

Model		DX-BC6^*1
Display	Charging Confirmation LED	—
Power Source	Type	Dedicated lithium-ion battery pack
	Capacity	6270 mAh
	Charging Time	Approx. 7 hours
Interfaces	Magnet Connector	—
	USB
	Non-contact Charging
Dimensions		78.7 × 40.6 × 22.4 mm 3.10" × 1.60" × 0.88"
Weight		Approx. 115 g 4.06 oz
Accessory		—
^*1 The DX-BC6 can be used only with the expansion unit installed. The interface and charging status LEDs for the DX-BC6 are included on the side of the attached expansion unit.

Keyence GL-VM36LP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM36LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			36
Total length			1440 mm 56.69"
Detection height			1400 mm 55.12"
Protection height			1485 mm 58.46"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.3
		OFF→ON	48.0 ^*3
		All blocked→ON	55.2 ^*4
	With channel A or B	ON→OFF	15.0
		OFF→ON	60.8 ^*3
		All blocked→ON	81.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	145 ^*5
		Receiver	158 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	55 ^*5
		Receiver	60 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		940 g 33.18 oz
	Receiver		950 g 33.53 oz
	Total		1890 g 66.71 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence CL-C30 Keyence

0.00 kr

Sold Out

Specifications

Model				CL-C30
Length				30 m 98.4'
Weight				2500 g

Keyence UD-500 Keyence

20,751.00 kr

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X100R Keyence

40,134.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV-G600MA Keyence

21,733.00 kr

In stock, 13 units

Specifications

Model		IV-G600MA
Type		Wide field of view sensor model
Installed distance		40 to 600 mm 1.57" to 23.62"
View		Installed distance 40 mm 1.57": 42 (H) × 31 (V) mm 1.65" (H) × 1.22" (V) to installed distance 600 mm 23.62": 550 (H) × 412 (V) mm 21.65" (H) × 16.22" (V)
Image sensor	Type	1/3 inch monochrome CMOS
	Pixel	752 (H) x 480 (V) 29.61" (H) x 18.90" (V)
Focus adjustment		Auto^*1
Exposure time		1/50 to 1/50,000
Lights	Illumination	Infrared LED
	Lighting method	Pulse lighting
Indicators		2 (the same display details for both indicators)
Environmental resistance	Enclosure rating	IP67^*2
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions^*3
	Shock resistance	500 m/s², 3 times in each of 6 directions^*3
Material		Main unit case: Zinc die-casting, Front cover: Acrylic (hard coat), Operation indicator cover: TPU
Weight		Approx. 75 g
^1 The focusing position can be automatically adjusted at the time of installation. Deactivated during the operation. Focusing position can be registered by program. ^2 Except when polarized filter attachment (OP-87899/OP-87900/OP-87901/OP-87902) is mounted ^*3 Except when IV-G dome attachment (IV-GD05/IV-GD10) is mounted

Keyence GS-MB23 Keyence

0.00 kr

Sold Out

Specifications

Model				GS-MB23
Type				Hinged door mounting bracket
Applicable model				for GS-M9 Series
Frame size				40 - 45 mm 1.57" - 1.77"
Weight				Approx. 90 g 3.17 oz

Keyence FU-58U Keyence

2,912.00 kr

Only 1 unit left

Specifications

Model		FU-58U^*1
Optical axis diameter (Standard target to be detected)		ø0.5 mm0.02"
Fibre unit length		1 m39.37" free-cut
Minimum bend radius		R2 mm0.079"
Minimum detectable object		Opaque material with a diameter of 0.005 mm0.0002" ^*2
Tightening torque		0.05 Nm
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Material		Core fiber : acrylic, fiber sheath : nylon, case : SUS303
Accessories		Fiber cutter, FU adapter
Weight		Approx. 4 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence OP-87464 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87393 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-B16TC Keyence

5,710.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VM104HP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM104HP
Beam axis spacing/Lens diameter			20 mm 0.79": ø5 ø0.197"
Number of beam axes			104
Total length			2080 mm 81.89"
Detection height			2060 mm 81.10"
Protection height			2105 mm 82.87"
Minimum detectable object size			ø25 mm ø0.98" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	8.2
		OFF→ON	52.1 ^*3
		All blocked→ON	63.6 ^*4
	With channel A or B	ON→OFF	26.5
		OFF→ON	87.4 ^*3
		All blocked→ON	125.3 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	185 ^*5
		Receiver	201 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	61 ^*5
		Receiver	67 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1350 g 47.65 oz
	Receiver		1370 g 48.36 oz
	Total		2720 g 96.01 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence LV-S71T Keyence

4,387.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-84396 Keyence

1,423.00 kr

Only 10 units left

Specifications

Model				OP-84396
Type				Head mounting bracket
Applicable product				GT Series/GT2 Series
Note				Sold separately

Keyence OP-88924 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88924
Type				Dedicated power supply cable M12, 8-pin female to 8 pin male, extention
Length				5 m 16.4'

Keyence LV-S71R Keyence

4,387.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV4-600MA Keyence

52,809.00 kr

Only 2 units left

Specifications

Model		IV4-600MA
Type		Wide field of view model
Installed distance		From 50 mm 1.97" ^*1
Tools	Available modes	Standard Mode, Sorting Mode, AI Through Count Mode
	Tool with standard mode	Standard/Sorting Modes: AI Differentiate, Outline, ColorArea ^2, Area ^3, EdgePixels, ColorAverage ^2, Brightness Avg ^3, Width, Diameter, Edge Presence, Pitch, Color Prohibit, Position Adjustment, Hi-Sp. Adj (1-axis/2-axis), Blob Count, AI Identify, AI Count, Total, AI OCR, AI Trigger AI Through Count Mode: Count, Total
	Number of tools	65 tools ^*4
Field of view		Installation distance 50 mm 1.97": 51 (H) × 38 (V) mm to Installation distance 3000 mm 118.11": 2730 (H) × 2044 (V) mm (reference value)
Switch settings (programs)		128 programs (with SD card)/32 programs (without SD card)
Image receiving element	Type	1/2.9 inch monochrome CMOS
	Number of pixels	1280 (H) × 960 (V)
Image history	Number of storable images	100 images ^*5
	Save conditions	Logging Settings 1: NG only/OK near NG threshold ^6/All – selectable. Logging Settings 2: Manually configured number before/after NG/Fixed interval – selectable ^5
Focus adjustment		Auto ^*7
Image data transfer	Transfer destination	microSD card/FTP server/SFTP server – selectable
	Transfer format	BMP/JPEG/iv4p/txt: Selectable, file name can be changed
	Transfer conditions	OK/NG/NG and OK near threshold ^6/OK near threshold ^6/All/Judgment Complete – selectable
Exposure time		12 μs to 10 ms ^*8
Analysis information	RUN display	Tool-specific list (judgment results, match, match bar display) ^*9
	RUN information	Switchable between OFF/histogram/processing time/count/output monitor Histogram: Histogram, match (MAX, MIN, AVG), OKs, NGs Processing time: Processing time (latest value, MAX, MIN, AVG), cap. time (latest value, MAX, MIN, AVG) Count: No. of triggers, OKs, NGs, no. of trigger errors, Output monitor: Output-specific ON/OFF status ^*9
Lights	Illumination	Infrared LED
	Lighting method	Pulse lighting
Other functions	Image capture function	Digital zoom (×2, ×4), HDR, high gain, color filters ^2, white balance ^2, brightness correction, Smart Image Optimization, preliminary capture, trapezoidal shape correction, mirror inversion correction Capture range settings (with high-speed filter disabled: 1280×960, 640×480, 320×240, 160×120. With high-speed filter enabled: 640×480, 320×240, 160×120, 80×60)
	Tool functions	Additional Learning (AI Differentiate, AI Identify, AI OCR, AI Count, AI Trigger. AI Through Count Mode: Count), remove outline, masking function, color extraction/exclusion ^2, color histogram function ^2, monochrome histogram function ^*3, scaling function
	Utilities	List of NG sensor occurrences, NG hold, test run, I/O monitor, security settings (2-step password, Enhanced Security Mode), simulator ^*10, adding FTP image information, multiple position adjustment, adding multiple masters, high-speed program switching, automatic program switching, automatic settings backup/restore, mid-operation threshold changes, excessive input trigger time detection
Indicators		OUT, TRIG, STATUS, LINK/ACT, SD
Input	Type	Switchable between non-voltage input/voltage input For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current approx. 2 mA (at 24 V)
	Number of inputs	6, 3 of which are selectable between IN/OUT
	Function	IN1: External trigger. IN2, IN3, I/O1 to I/O3: Assign any desired function. Assignable functions: Program switching, error clear, ext. master image registration, SD card save stop, OCR serial no. increment, reset
Output	Type	Open collector output: Switchable between NPN/PNP and N.O./N.C. Maximum rating: 30 V, 50 mA, residual voltage 1.5 V or lower ^*11
	Number of outputs	6, 3 of which are selectable between IN/OUT
	Function	Assign any desired function. Assignable functions (Standard/Sorting Mode): Total status (OK/NG), operation, busy, trigger ready, strobe, position adjustment result, tool-specific judgment results, tool-specific logic calculation results, error, SD card error, parts judgment results, master judgment results, insufficient SD capacity, file transfer in progress, AI Trigger output Assignable functions (AI Through Count Mode): Operation, busy, error, tool-specific count up, tool-specific judgment result, tool-specific logic calculation result
Power/I/O	Connector	M12 12-pin A-code male connector
	PoE	PoE Power Class 4/6 ^*12
Ethernet	Standard	1000BASE-T/100BASE-TX
	Connector	M12 8-pin X-code female connector
Network function		FTP client, SFTP client, SNTP client, OPC UA server, MQTT client
Interface compatibility	Built-in Ethernet	EtherNet/IP, PROFINET CC-B ^*13, TCP/IP Nonprocedural Comm (×2 connections)
	Communication unit (IV4-CU1)	PROFINET CC-C ^*14, EtherCAT®
Expanded memory		microSD card (microSD/microSDHC) ^*15
Power supply	Power voltage	24 V +25%, -20% (including ripple) ^*16
	Power consumption	3.4 A or less (at 19.2 V), 2.7 A or less (at 24.0 V)(no AI imaging illumination unit; with communication unit; includes 120 mA output load) 3.3 A or less (at 19.2 V), 2.6 A or less (at 24.0 V)(no AI imaging illumination unit; no communication unit; includes 120 mA output load) 2.1 A or less (at 19.2 V), 1.8 A or less (at 24.0 V)(with AI imaging illumination unit; with communication unit; includes 120 mA output load) ^*17
	Average power consumption	9.3 W (without AI imaging illumination unit) 12.8 W (with AI imaging illumination unit)
Environmental resistance	Enclosure rating	IP67 ^*18
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing) ^*19
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	Frequency: 10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions ^*20
	Shock resistance	500 m/s² 1640.4 ft/s² 3 times in each of 6 directions ^*20
Material		Main unit case: Aluminum die-casting. Front cover: Acrylic (hard coating). Back plastic cover and plastic lid: PBT. Operation indicator cover: TPU. Power supply connector: PA/POM. Ethernet connector: Copper alloy + nickel plating. Label: PC. Power supply connector waterproof cap: PC + ABS alloy. Ethernet connector waterproof cap: PC ^*21
Weight		Approx. 370 g 13.06 oz (no AI imaging illumination unit) Approx. 560 g 19.77 oz (with AI imaging illumination unit)
^1 If using at 3 m 9.8' or more, it is recommended that the polarizing filter be removed before use. ^2 Color type only. ^3 Monochrome type only. ^4 Can be placed on a program-specific basis. This is the total combined number of differentiation tools and position adjustment tools. Up to 64 differentiation tools can be placed. Up to 16 AI Count/AI OCR tools can be placed. In Sorting Mode, 8 differentiation tools can be placed. In AI Through Count Mode and High Speed/Standard Mode, the number of tools that can be placed is two AI Count tools and one Total tool. For high accuracy, six AI Count tools and two Total tools can be placed. ^5 Saved to the sensor’s internal memory. Images saved to the sensor’s internal memory can be backed up to a PC using the PC software (IV-H1SN) or to a USB memory stick or microSD card plugged into the control panel (IV4-CP70) or Display Expansion Unit (IV4-DU10). ^6 AI Differentiate, AI Identify, AI OCR(Show Matching Rate) only. ^7 Focus position can be automatically adjusted during installation. It cannot be adjusted while running. Focus position can be registered separately for each program. ^8 Maximum exposure time is 500 ms only when lighting is set to OFF. ^9 Can be displayed on the control panel (IV4-CP70) or Display Expansion Unit (IV4-DU10), or via PC software (IV-H1SN). ^10 Can be used with PC software (IV-H1SN). ^11 Set total output to 120 mA or less. Residual voltage specifications apply to an output current of 20 mA or less. For an output current of 50 mA, the value is 2.0 V. ^12 For PoE-powered devices, IEEE802.3at Power Class 4 or higher is recommended when using AI imaging illumination units; IEEE802.3bt Power Class 6 or higher is recommended when an AI imaging illumination unit is not in use. When using PoE, device operation may be restricted due to power limitations. ^13 Conformance Class B, applicable protocols: LLDP, SNMP ^14 Conformance Class C, applicable protocols: LLDP, SNMP, MRP ^15 Use KEYENCE-recommended products. ^16 24 VDC +25%/−10% (including ripple) when using OP-88656 (10 m 32.8'). ^17 The system is designed to lower its peak current when equipped with an AI imaging illumination unit. Without it, the peak current will be higher. ^18 Except when polarizing filters (OP-88640/OP-88641/OP-88644/OP-88645) are installed. ^19 When the operating ambient temperature exceeds 40°C 104°F, install in accordance with KEYENCE instructions, taking appropriate measures for heat dissipation to ensure that the case temperature does not exceed the rated 75°C 167°F. Refer to the instruction manual for more information. ^20 Except when dome attachment (IV3-D10) is installed. ^*21 ESD safe and IEC61340-5-1 compliant.

Keyence WM-6025 Keyence

0.00 kr

Sold Out

Specifications

Model				WM-6025
Camera unit	Measurement range (W × D × H)			25000 × 11000 × 12500 mm 984.25" × 433.07" × 492.13"
	Camera unit rotation angle	Horizontal rotation		±120°
		Vertical tilt		±30°
	Minimum display unit	Distance		0.001 mm 0.00004"
		Angle		0.001°
	External input			2 non-voltage inputs
	Communication	WLAN communication		IEEE 802.11 a/b/g/n/ac ^*1
		Bluetooth communication		Bluetooth 5.0
		USB communication		USB 3.0
		Infrared communication		945 nm
	Power supply			Supplied from dedicated AC adapter
	Ratings	Rated voltage		24 VDC
		Current consumption		4.5 A
	Environmental resistance	Operating ambient temperature		0 to 40°C 32 to 104°F
		Operating ambient humidity		Max. 80% RH (no condensation)
	Weight			Approx. 7.2 kg 15.87 lb
Contact probe	Probing system accuracy			±(28 + 5 L/1000) μm ^*2
	Marker	No. of markers		7
		Light source		870 nm
	Applicable stylus			M5
	Display	Display method		2.7-inch transmissive TFT color LCD
		Resolution		320 × 240 pixels
		Touch panel		Analog resistive
	Communication	Bluetooth communication		Bluetooth 5.0
		USB communication		USB 2.0
		Infrared communication		945 nm
	Power supply	Battery		Dedicated lithium-ion battery pack
		Capacity		3250 mAh
		Charging time		6.5 hours
		Continuous usage time		Approx. 6 hours
	Ratings	USB connection	Rated voltage	5 VDC
			Current consumption	1 A
		Battery operation	Rated voltage	3.63 VDC +10%/-1%
			Current consumption	1.25 A
	Environmental resistance	Operating ambient temperature		0 to 40°C 32 to 104°F
		Operating ambient humidity		Max. 80% RH (no condensation)
	Weight			Approx. 600 g 21.18 oz (with battery inserted)
^1 With the WM-WL attached. ^2 Refer to ISO 10360-2 (in the range of 3980 × 2500 × 1500 mm 156.69" × 98.43" × 59.06" and when the operating ambient temperature is 20°C ±1°C 68.0°F ±1.8°F; L represents the measurement length (Unit: mm inch)).