Machine Vision Systems

Keyence HR-X100 Keyence

15,285.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-E800 Keyence

9,263.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-85502 Keyence

3,313.00 kr

Only 1 unit left

Specifications

Model				OP-85502
Type				Connector Cable
Number included				1 pcs.
Length				10 m 32.81'
Material				PVC nickel-plated brass
Note				Sensor side: M12 4-pin straight, Cable end: Loose wires
Weight				Approx. 220 g

Keyence FU-34 Keyence

3,803.00 kr

Only 1 unit left

Specifications

Model		FU-34^*1
Optical axis diameter (Standard target to be detected)		ø1 mm0.039"
Beam emitting direction		Side
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2
Minimum bend radius		R25 mm0.984"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 17 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence GL-RCC7S Keyence

0.00 kr

Sold Out

Specifications

Model				GL-RCC7S
Number included				incl. 1 cable
Length				7 m 23.0'
Note				Used for extension. Needed for both transmitter and receiver.
Weight				Approx.400 g

Keyence OP-027 (OP-0027) Keyence

0.00 kr

Sold Out

Specifications

Model				OP-027
Type				BNC connector jack
Applicable product				EH, TH 3D-2V coaxial code

Keyence FS-N14N Keyence

2,150.00 kr

In stock, 53 units

Specifications

Model		FS-N14N
Type		High functionality 2 output Cable
Output		NPN
Main unit/expansion unit		Expansion unit
Control output		2 NPN open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
Monitor output (1-5 V)		-
External input		1 Input time 2 ms (ON)/20 ms (OFF) or more (25 ms or more (ON/OFF) when external calibration is selected.)
Light source LED		Red, 4-element LED
APC		ON/OFF switchable (Factory setting: OFF)
Response time		50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Number of interference prevention units		0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Unit expansion		Up to 16 units can be connected total (two output type is treated as two units)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current Consumption	Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)^1 Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)^1 Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
	Ambient temperature	-20 to +55 °C -4 to +131 °F (No freezing)^*2
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Both main unit and expansion unit housing material: Polycarbonate
Weight		Approx. 70 g
^1 Increases 100 mW (4.0 mA) for High Speed mode ^2 One or two more units connected: -20 to +55 °C (-4 to +131 °F); 3 to 10 more units connected: -20 to +50 °C (-4 to +122 °F); 11 to 16 more units connected: -20 to +45 °C (-4 to +113 °F). When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.

Keyence OP-87947 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87947
Type				Stylus calibration jig
Applicable product				XM-1000, XM-T1000, XM-1200, XM-T1200
Note				Optional standard parts for single item purchase

Keyence KZ-40R Keyence

3,803.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence RC2-21K Keyence

6,667.00 kr

Only 1 unit left

Specifications

Model		RC2-21K
Operation method		Addition, subtraction, addition and subtraction
Operation mode		Overcount, auto reset, rotary, range distinction
Return method		Manual reset, external reset, automatic reset (in auto reset mode)
Display power		7-segment LED (character height: 14 mm)
Number of digits		5-digit display (zero suppression method), -9,999 to 99,999^*1
Prescale function	A	1 to 99 is counted per pulse input
	B	1 is counted per 1 to 99,999 pulse inputs
Power off memory time		Approx 10 years (at 20°C 68°F)
Input	System	Separate, instruction, phase difference
Mounting method		Panel mount (embedding)
External calibration input signal	Signal	No-voltage input (with contacts, without contacts [count input, inhibit input, reset input])
Highest counting speed		With contacts: 50 Hz, without contacts: 500 Hz, 5 kHz, 50 kHz (switchable; 1:1 ON:OFF ratio)
Control output	One-shot output time	0.01 s to 9.99 s (variable)
	Relay	Relay output: 13 ms (when set to 50 Hz), 4 ms (when set to 500 Hz), 4 ms (when set to 5 kHz), 4 ms (when set to 50 kHz)
DC output		12 VDC ± 10%, 100 mA maximum
Rating	Power voltage	100 to 240 VAC ±10 %, 50/60 Hz
	Power consumption	12VA or less
Environmental resistance	Insulation resistance	100 MΩ or more (tested with a 500 VDC megger) between all the AC external terminals and the case
Noise resistance		Square wave noise generated by a noise simulator, between the power supply terminals, 1 kV for 1 µs
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Withstand voltage	500 VAC for 1 minute (between all the external terminals and the case)
Weight		Approx. 320 g
^*1 Display uses the zero suppression method.

Keyence MP-FB20 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-80TZ Keyence

5,011.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-HCC10 Keyence

11,611.00 kr

Only 3 units left

Specifications

Model				FD-HCC10
Cable end				M12, 8-pin female to M12, 4-pin male
Length				10 m 32.8'
Material				PVC
Weight				Approx. 480 g

Keyence OP-88076 Keyence

11,592.00 kr

Only 1 unit left

Specifications

Model				OP-88076
Overview				This is a relay connector cable with M12 on both ends. This connector cable is made of polyurethane (PUR), which has excellent oil resistance.
Applicable product				M12 connector sensor
Cable end				M12 straight connector - M12 straight connector
Length				5 m 16.40'
Material				Cable: Polyurethane (PUR)
Weight				Approx. 170 g 6.00 oz

Keyence FD-HCB10 Keyence

10,022.00 kr

Only 2 units left

Specifications

Model				FD-HCB10
Cable end				M12, 8-pin female - 6-core cable
Length				10 m 32.8'
Material				PVC
Weight				Approx. 460 g

Keyence GL-RA400 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-RA400
Type				Front Protection Cover
Overview				Plastic cover that is used to protect the detecting surface.
Applicable product				GL-R39F,GL-R20H,GL-R10L
Number included				1 unit
Material				Frame: ABS, Transparent parts: Polycarbonate
Weight				Approx. 38 g

Keyence OP-88610 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ER-12TPC Keyence

0.00 kr

Sold Out

Specifications

Model		ER-12TPC ^1 ^2
Type		Ultra-long distance shielded type Screw type M12 Connector (M12 4-pin) PNP output
Power supply cable length		― ^*3
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	10 mm 0.39" ±10% ^*4
	With distance switching (Mode 2)	6 mm 0.24" ±10% ^*4
Response frequency	With default settings (Mode 1)	30 Hz ^5 ^6
	With distance switching (Mode 2)	100 Hz ^5 ^6
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*7
Standard detectable object (Iron, t = 1 mm 0.04")		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 50 mA or less for 1 output, or 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*8
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V) ^*9
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*10
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Button: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 35 g 1.24 oz
^1 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^2 Long-body type. See “Dimensions” for details. ^3 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^4 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^5 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^6 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^7 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^8 Residual voltage is for when a 2 m 6.6' cable is used. ^9 For IO-Link-compatible devices listed under 1, power consumption is as follows. M8: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V) ^*10 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence OP-89035 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-N14DT Keyence

4,078.00 kr

Only 5 units left

Specifications

Model				KV-N14DT
General specifications	Power voltage			24 VDC (+10%/-15%)
	Operating ambient temperature			0 to 55°C 32 to 131°F (no freezing)^1^2
	Operating ambient humidity			5 to 95%RH (no condensation)^*1
	Operating environment			As little dust and corrosive gas as possible
	Noise immunity			1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case
	Insulation resistance			50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case)
	Output power supply voltage			―
	Storage temperature			−25 to +75°C −13 to +167°F
	Vibration resistance	Intermittent vibration	Frequency: 5 to 9 Hz	Amplitude: 3.5 mm 0.14"^3^4
			Frequency: 9 to 150 Hz	Acceleration: 9.8 m/s² 32.2'/s²^3^4
		Continuous vibration	Frequency: 5 to 9 Hz	Amplitude: 1.75 mm 0.07"^3^4
			Frequency: 9 to 150 Hz	Acceleration: 4.9 m/s² 16.1'/s²^3^4
	Shock resistance			Acceleration: 150 m/s² 492.1'/s², application time: 11 ms, three times in each of the X, Y, and Z directions
	Operating altitude			2000 m 6561.7' or less
	Overvoltage category			AC: II, DC: I
	Pollution degree			2
Performance specifications	Calculation control method			Program storage method
	I/O control method			Refresh method
	Program language			Expanded ladder, KV Script, mnemonic
	Number of instructions			Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions
	Instruction execution speed			Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum
	Program capacity			8k steps
	Maximum number of attachable I/O units			3
	Maximum number of I/O points			128 (excluding the base unit I/O)
	Input relay/Output relay/Internal auxiliary relay	R		Total of 9600 points 1 bit (R000 to R59915)
	Link relay	B		8192 points 1 bit (B0 to B1FFF)
	Internal auxiliary relay	MR		9600 points 1 bit (MR000 to MR59915)
	Latch relay	LR		3200 points 1 bit (LR000 to LR19915)
	Control relay	CR		1440 points 1 bit (CR000 to CR8915)
	Timer	T		512 points 32 bit (T0 to T511)
	Counter	C		256 points 32 bit (C0 to C255)
	Data memory	DM		32768 points 16 bit (DM0 to DM32767)
	Link register	W		16384 points 16 bit (W0 to W3FFF)
	Temporary memory	TM		512 points 16 bit (TM0 to TM511)
	High-speed counter	CTH		2 points (CTH0 to CTH1), 32-bit automatic reset counter^5 (Input response: 100 kHz per single phase, 50 kHz per phase difference)^6
	High-speed counter comparator	CTC		4 points (CTC0 to CTC3), 32 bits, two points per high-speed counter
	Index register	Z		12 points 32 bit (Z01 to Z12)
	Control memory	CM		9000 points 16 bit (CM0 to CM8999)
	Positioning pulse output			2 axes, Maximum output frequency: 100 kHz
	Base unit I/O			Input: 8 points, output: 6 points, Input common: 1 point, Output common: 1 point
	Number of comments and labels that can be stored in the main unit	Device comment		10000 When a maximum-length ladder program is written with no labels.
		Label		14000 When a maximum-length ladder program is written with no device comments.
	Power off hold function	Program memory		Flash ROM can be rewritten 10000 times
		Device		Nonvolatile RAM^*7
	Self-diagnosis function			CPU error, RAM error, and other problems
Input specifications	Relay number			General input: R000 to R003 (4 points), High-speed A-phase and B-phase input: R004 to R007 (2 channels, 4 points in total)
	Input mode			24 VDC input (open collector)
	Maximum input voltage			26.4 VDC
	Rated input voltage			24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA^*8)
	Minimum ON voltage			19 VDC
	Maximum OFF current			1.5 mA
	Common method			General input: All points/1 common (1 terminal), High-speed A-phase and B-phase input: Shared common for all points (shared with general input)
	Circuit delay time			General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), ON to OFF: Max. 50 μs (Typ. 15 μs) High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs) ^*9
	Input time constant			Normal: 10 ms, When the HSP instruction is used: 10 μs When CR2305 is turned ON: 10 μs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.^*9
				Input time constant setting 10 μs: Digital filter 1.6 to 2 μs Input time constant setting 20 μs: Digital filter 9 to 12 μs Input time constant setting 110 μs: Digital filter 90 to 93 μs Input time constant setting 500 μs: Digital filter 300 to 400 μs Input time constant setting 1 ms: Digital filter 800 to 900 μs Input time constant setting 2.5 ms: Digital filter 2.3 to 2.4 ms Input time constant setting 5 ms: Digital filter 4.0 to 4.5 ms Input time constant setting 10 ms: Digital filter 9 to 9.5 ms
	Response frequency			(High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50%
Output specifications	Relay number			General output: R504 to R505 (2 points), High-speed output: R500 to R503 (4 points)
	Output mode			MOSFET ^*10
	Rated load			30 VDC, 0.5 A
	Maximum OFF voltage			30 VDC
	Leakage current at OFF			100 μA or less
	Residual voltage at ON			0.8 VDC or less (with 0.5 A output), 0.6 VDC or less (with 0.3 A output)
	Common method			8 to 10 points/1 common
	ON/OFF response time			General output: OFF to ON: 100 μs (load of 1 mA or more), ON to OFF: 200 μs (load of 1 mA or more) High-speed output: OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load)
	Overcurrent protection			Protection provided for each common^*11
	Output frequency			High-speed output: 100 kHz (7 to 100 mA load)
Built-in serial port	Interface	Communication standard		RS-232C
		Connection		Modular connector
	Transmission specifications RS-232C	Baud rate		1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
		Transmission method		Full duplex
		Data format	Start bit	1 bit
			Data bits	7 bits, 8 bits
			Stop bits	1 bit, 2 bits
		Error detection	Parity	Even, odd, none
		Transmission distance		15 m 49.2'
		Number of transmission units		1
	Indication			SD (green), RD (red)
Internal current consumption				150 mA
Weight				Approx. 330 g
^1 The range guaranteed as a system (excluding items specially noted for the units and cassettes). ^2 The temperature below the unit center (30 mm 1.18") inside a control panel. ^3 These specifications correspond to situations in which the unit is mounted on a DIN rail and in which the unit is mounted on the panel directly. ^4 Conforms to JIS B 3502 and IEC61131-2, Scan times: 10 times (100 minutes) in each of the X, Y, and Z directions ^5 You can also configure the settings so that automatic reset is not used. ^6 Only open collectors are supported. Line drivers are not supported. ^7 You can set the target device by clicking “CPU system setting” and then “Power off holding” in KV STUDIO. ^8 Reference value of input current. ^9 The input response time corresponding to the input time constant can be calculated as shown below. (Response time) = (Circuit delay of the input circuit) + (Delay by the digital filter) Example: Maximum response time when the input time constant is set to 500 μs OFF to ON: 30 μs (circuit delay) + 400 μs (digital filter) = 430 μs ON to OFF: 50 μs (circuit delay) + 400 μs (digital filter) = 450 μs ^10 MOSFET (N-ch) output for the sink output type. ^*11 If an overcurrent occurs, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common until the cause of the problem is removed.

Keyence OP-2249 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-2249
Type				Internal Tooth Washer for M8
Applicable product				EZ-8M, EV-108M, EV-108U
Number included				1 pcs.

Keyence SV2-C3CG Keyence

0.00 kr

Sold Out

Specifications

Model				SV2-C3CG
Type				Motor power cable, Hi-flex robotic cable
Length				3 m 9.8'
Note				for 750 W motor

Keyence OP-76875 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-76875
Applicable product				GT Series/GT2 Series
Note				Sold separately

Keyence EV-112UC Keyence

0.00 kr

Sold Out

Specifications

Model		EV-112UC
Type		DC , Non-shielded
Shape		M12
Detecting distance		8 mm 0.31" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		30 x 30 mm 1.18" x 1.18"
Hysteresis		20% max. of detecting distance, within -10 to +70°C 14 to 158°F
Response frequency		600 Hz
Operation mode		N.C.
Temperature characteristics		±10% max. of detecting distance, within -10 to +70°C 14 to 158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Reversed polarity, short-circuit, surge voltage
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 20 % or less
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Nickel-plated brass
Accessories		Nut × 2, toothed washer × 1, instruction manual
Weight		Approx. 110 g