Machine Vision Systems

0.00 kr

Sold Out

Specifications

Model				SJ-C3
Type				Controller/high voltage source extension cable
Applicable product				SJ-M100/200/300/400 or SJ-F100
Length				3 m 9.84'

Keyence OP-51655 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-51655
Cable length				3 m 9.8'

Keyence CC-CL2 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV-E5A Keyence

0.00 kr

Sold Out

Specifications

Model				SV-E5A
Type				Encoder cable, Standard
Length				5 m 16.4'
Note				for 1 k to 5 kW motor

Keyence ER-GM12N03C Keyence

0.00 kr

Sold Out

Specifications

Model		ER-GM12N03C
Type		General-purpose all-metal shielded type Screw type M12 Connector with pigtail (M12 4-pin) NPN output Mid-Range
Power supply cable length		0.3 m 1.0' ^*1
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		None
Button	Function	―
Detecting distance		4 mm 0.16" ±10% ^*2
Response frequency		150 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		12 × 12 mm 0.47" × 0.47"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303, Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 50 g 1.77 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence FD-P100 Keyence

19,314.00 kr

Only 5 units left

Buy the Keyence FD-P100 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-P100 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence MP-F20RF Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PX-H71G Keyence

5,385.00 kr

Only 6 units left

Specifications

Model		PX-H71G^*1
Type		M8 Thrubeam Armored
Light source LED		Red 4-eleant LED (Wavelength：635 nm)
Detecting distance	TURBO	4 m 13.1'
	SUPER	6 m 19.7'
	ULTRA	12 m 39.4'
	MEGA	20 m 65.6'
Detectable object		ø4 mm ø0.16" Opaque materials
Spot diameter		―
Environmental resistance	Enclosure rating	IEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69K
	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Case material		Housing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7
Accessories		Screw nut (SUS303) x 4, toothed washer (SUS304) x 2
Weight		Approx. 250 g^*2 (Including cable)
^1 The PX-H72 is available with a 30 m 98.4' cable for the transmitter and 10 m 32.8' cable for the receiver. ^2 The PX-H71G, H72G and H61G have SUS304 spiral protective tube on the cables.

Keyence KV-EB1R Keyence

6,095.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FL-C00L Keyence

16,474.00 kr

Only 3 units left

Buy the Keyence FL-C00L - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FL-C00L is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence SV2-D5AG Keyence

0.00 kr

Sold Out

Specifications

Model				SV2-D5AG
Type				Motor power cable, Hi-flex robotic cable with electromagnetic brake
Length				5 m 16.4'
Note				for 50 W / 100 W motor

Keyence MP-FB10 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88070 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88070
Overview				This is a relay connector cable with M8 on both ends. This connector cable is made of polyurethane (PUR), which has excellent oil resistance.
Applicable product				M8 connector sensor
Cable end				M8 L-shaped connector - M8 straight connector
Length				2 m 6.56'
Material				Cable: Polyurethane (PUR)
Weight				Approx. 70 g

Keyence OP-89162 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-89162
Excitation wavelength				470/40 nm
Emission wavelength				525/50 nm
Dichroic mirror wavelength				495 nm

Keyence KV-D20 Keyence

12,745.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VT2-5MB Keyence

26,235.00 kr

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88677 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-G200L Keyence

0.00 kr

Sold Out

Specifications

Model			FD-G200L
Pipe size	DN (Diameter Nominal)		150 A, 200 A
	NPS (Nominal Pipe Size)		6", 8"
	Outer diameter of pipe		ø163 to 171 mm 6.42" to 6.73", ø214 to 222 mm 8.43" to 8.74"
	Pipe thickness		2.8 to 5.0 mm 0.11" to 0.2"
Supported pipe materials			Iron, steel, stainless steel
Supported fluids			Air, Nitrogen, other gases^*1
Fluid temperature			0 to 60ºC 32 to 140 °F
Recommended pressure			0.4 MPa or greater (58 PSI or greater)
Rated velocity of flow range			Up to 15 m/s
Actual flow rate range (typical)	m³/h		Pipe size 150 A: 1000.0 Pipe size 200 A: 1800.0
	L/min		Pipe size 150 A: 17000 Pipe size 200 A: 30000
	CFM		Pipe size 150 A: 600.00 Pipe size 200 A: 1100.00
Standard flow rate range (typical) [CFM]	20°C 68°F 60 psi 0.41 MPa		Pipe size 150 A: 2842.15 Pipe size 200 A: 5210.62
	20°C 68°F 80 psi 0.55 MPa		Pipe size 150 A: 3603.18 Pipe size 200 A: 6605.84
	20°C 68°F 100 psi 0.69 MPa		Pipe size 150 A: 4364.21 Pipe size 200 A: 8001.06
	20°C 68°F 120 psi 0.83 MPa		Pipe size 150 A: 5125.24 Pipe size 200 A: 9396.28
Display			QVGA 2.2" LCD color monitor
Display update cycle			Approx. 3 Hz
Display resolution	Instantaneous flow rate		0.1 m³/h, 1 L/min, 0.1 CFM
	Consumption/leakage amount		0.1 m³, 1 L, 1 CF
Response time			1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable)
Measurement accuracy	Between 10 and 100% of F.S.		±2.0% of RD^2^3^4^5
	Between 1 and 10% of F.S.		±1.0% of F.S.^2^3^4^5
Zero point error			±0.15% of F.S.^2^6
Static leakage repeatability			±1.0% of RD^4^7
Hysteresis			Variable
Flow units			CFM(S), CFM, m³/h (N), m³/h (S), m³/h, L/min (N), L/min (S), L/min
I/O wiring connection port			M12 4-pin connector (male)
Detection mode (switchable)	ch.1		Instantaneous flow mode/area mode/pulse (+) mode/integrated flow mode/warning mode (consump)^*8
	ch.2		Instantaneous flow mode/area mode/pulse (−) mode/warning mode (leak)/error output mode/analog output/integrated flow reset/flow rate zero input/origin adjustment input^*8
Standard I/O (switchable)	Control output (ch.1/ch.2)		NPN/PNP setting switchable, open collector output 30 VDC or less, max. 100 mA/ch, residual voltage: 2.5 V or less
	Analog output (ch.2)		4 to 20 mA/0 to 20 mA, load resistance: 500 Ω or less
	External input (ch.2)		Short-circuit current: 1.5 mA or less, input time: 20 ms or more
Protection circuit			Power supply reverse connection protection, power supply surge protection, short-circuit protection for each output, surge protection for each output
Analog input (for volume conversion)			M8 4-pin connector (female), analog current input (4 to 20 mA), input resistance: 100Ω or less
Power supplied to pressure sensor			Supply voltage: Equivalent to voltage applied to the FD-G, Supply current:70 mA or less (analog output of the pressure sensor included)
Communication interface	USB		USB 2.0
	Ethernet	Standard	IEEE 802.3u (100BASE-TX)
		Transmission rate	100 Mbps
		Cable	Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable
		Connector	M12 connector (female, D-code)
Network function			Modbus TCP, EtherNet/IP™, IO-Link^*9
Recording capacity	Consumption amount/ leakage amount		Approx. 5 years
	Events		100
Power supply	Power voltage		20 to 30 VDC including 10% ripple (P-P), Class 2
	Power consumption		350 mA or less at 20 V, 290 mA or less at 24 V, 230 mA or less at 30 V (load current excluded) (analog output of the pressure sensor excluded), 550 mA or less at 20 V, 490 mA or less at 24 V, 430 mA or less at 30 V (Maximum load current excluded) (analog output of the pressure sensor excluded)
Environmental resistance	Enclosure rating		IP65/67 (IEC 60529)^*10
	Ambient temperature		Detection head: −10 to +60°C 14 to 140°F (no freezing), display unit: −10 to +55°C 14 to 131°F (no freezing)
	Relative humidity		5 to 85%RH (no condensation)
	Vibration resistance		10 to 500 Hz, power spectral density: 0.816 G²/Hz, XYZ axes
	Shock resistance		100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Display unit		Body: PBT + coating, display: PMMA, Power supply port: SUS304-equivalent, Ethernet port: zinc nickel plating
	Detection head		Body: PPS/SUS304, rear surface: rubber
	Mounting/damping bracket		SUS304
Weight			Approx. 2.8 kg
^1 The gas must be uniform and capable of transmitting ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^2 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the type and status of the pipe and the type and temperature of the gas. ^3 This is the value when considering linearity + span error in a stable environment with a temperature of 25°C 77°F. ^4 Defined with stable velocity of flow distribution. Does not include pulsations and fluctuations in the velocity of flow distribution primarily attributable to the equipment. ^5 The linearity error characteristic due to the pipe is not included in this value. ^6 It is possible to reduce zero point errors by performing an origin adjustment. ^7 This is the value within the range where measurement accuracy is guaranteed. ^8 When Bi-directional is specified, the following functions cannot be used. The selection of the comparison view/leak ratio view/static leakage, the measurement/display of the leakage amount/integrated flow, the setting of the target value/warning set value, and money conversions. Also, the I/O settings are limited as shown below. • ch.1: Pulse(+) mode • ch.2: Pulse(-) mode, Error output mode, Integrated flow reset, Flow zero input, Origin adjustment input ^9 IO-Link: Compatible with specification v1.1/COM1 (4.8 kbps). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^10 The IP65/67 enclosure rating is lost when a USB connection is established.

Keyence KV-P16T Keyence

4,771.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LX-130 Keyence

45,668.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV-GD05 Keyence

3,810.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LA12 Keyence

0.00 kr

Sold Out

Specifications

Model				CA-LA12
Focal point				12 mm 0.47"
F-stop range (aperture)				F1.4 to F16
Minimum WD				0.05 m 0.16'
Mount				C-mount
Filter size				M34 × P0.5
Compatible image sensor size				2/3"
TV distortion				0.10%
Resolving power				120 cycles/mm at center, 100 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 147 g 5.18 oz

Keyence CA-CH10BX Keyence

6,514.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X100MP Keyence

6,080.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.