Machine Vision Systems

3,040.00 kr

Only 2 units left

Specifications

Model				CA-DSW2
Type				Back Light
LED color				White
Power consumption				2.9 W
Input voltage				12 VDC
Weight				Approx. 30 g

Keyence AP-C40WP Keyence

3,214.00 kr

Only 3 units left

Specifications

Model		AP-C40WP
Type		Amplifier Unit, PNP
Applicable sensor head		AP-41M, AP-41, AP-43, AP-44
Set and display range		-15 to +110 % of F.S.^*1
Display		3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm 0.43"), Display cycle: 10 times/s
Operation indicator		Red LED x 2 (corresponding to control output 1 and 2)
Repeatability		±0.2 % of F.S.
Display resolution		AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg AP-43: Standard mode 0.01 kgf/cm², High-resolution/Focus mode 0.02 Psi
Power consumption	Normal	12 V: 960 mW (80 mA) max., 24 V: 1,400 mW (60 mA) max.
	Eco mode	12 V: 660 mW (55 mA) max., 24 V: 1,080 mW (45 mA) max.
Display temperature characteristic		±1 % of F.S. max.
Hysteresis		Variable (Standard: 0.5 % of FS; high-resolution/focus mode: 0.1 % of F.S.)
Response time (Chattering prevention function)		1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable)
I/O	Analog output	1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)
	Zero-shift input	Input time: 2 ms or more. (or analog output selectable)
	Control output	PNP open collector 100 mA max. (at 30 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate
Accessories		Power supply code (2-m 6.6' cable with connector), Head connector, and Unit seal
Weight		Approx. 74 g (with 2-m 6.6' cable)
^*1 The focus range applies while in focus mode only.

Keyence OP-32908 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-32908
Type				Panel mounting bracket (Gray)
Applicable product				AP-30, AP-40

Keyence OP-88773 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-BE10A Keyence

0.00 kr

Sold Out

Specifications

Model				SV2-BE10A
Type				Encoder cable, Standard cable with battery
Length				10 m 32.8'
Note				for 1 k to 5 kW motor

Keyence OP-66853 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-66853
Type				BNC terminal block^*1
^*1 Cannot be used in the ±20 mA range.

Keyence OP-85586 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-85586
Overview				This is a relay connector cable with M8 on both ends. This connector cable is made of polyurethane (PUR), which has excellent oil resistance.
Applicable product				M8 connector sensor
Cable end				M8 L-shaped connector - M8 straight
Length				2 m 6.56'
Material				Cable: Polyurethane (PUR)
Weight				Approx. 75 g

Keyence CL-S015N Keyence

0.00 kr

Sold Out

Specifications

Model				CL-S015N
Type				Optical unit
Head				CL-S015 ^*1
Reference distance				15 mm 0.59"
Reference measurement range	Measurement range			±1.0 mm ±0.04"
	Linearity			±0.35 μm ±0.000014" ^*2
High precision measurement range	Measurement range			-0.2 mm/-1.0 mm -0.01/-0.04"
	Linearity			±0.25 μm ±0.000010" ^*2
Resolution				0.25 μm 0.000010" ^*3
Spot diameter				ø10 μm ø0.0004"
Laser class	Optical unit			Class I
Sampling cycle				100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head		IP50
	Ambient light			Target surface illuminance: 30000 lux (Incandescent lamp)
	Operating ambient temperature	Head		-20 to 70°C -4 to 158°F
		Optical unit		0 to 50°C 32 to 122°F
	Relative humidity			85% RH or less (no condensation)
	Vibration resistance	Head		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit		10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance			15 G, 6 ms
	Vacuum			Vacuum environments
	Explosion-proof	performance	Head	None
			Optical unit
		Zone/Division	Head
			Optical unit
		Ambient temperature	Head
			Optical unit
		Certification number
Temperature characteristic	Head			0.005% of F.S./°C ^*4
	Optical unit			0.015% of F.S./°C
Material	Head			SUS303/304
	Optical unit			Polycarbonate
Weight	Head			Approx. 350 g 12.36 oz
	Optical unit			Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface). ^3 Value measured using 16,384 average cycles with KEYENCE reference workpiece (mirrored surface). ^4 These figures are based on the case where a jig made of SUS303 (or SUS304) is fixed between the head and the object.

Keyence CA-DRW9 Keyence

25,362.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88716 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DL-DN1 Keyence

9,347.00 kr

Only 9 units left

Specifications

Model				DL-DN1^*1
DeviceNet® specifi cations	Network power supply			11 to 25 VDC (supplied from DeviceNet® communication power supply)
Indicator				Network status indicator: 2-color (green/red) LED, Module status indicator: 2-color (green/red) LED, Sensor communication indicator: 2-color (green/red) LED
Sensor connection specifications	Connectable sensors			Sensor amplifiers with D-bus support^*2
	Number of connectable sensor units			Up to 15 units
DeviceNet® specifi cations	Compliant functions			Remote I/O communication (polling) Explicit messaging
	Address setting			0 to 63 (PGM compatible)
	Baud rate (automatically switched)			500 kbps/250 kbps/125 kbps
	Maximum cable length	500 kbps	thick cable	100 m 328.09' (thick cable)
			thin cable
		250 kbps	thick cable	250 m 820.21' (thick cable)
			thin cable	100 m 328.09' (thick cable)
		125 kbps	thick cable	500 m 1640.42' (thick cable)
			thin cable	100 m 328.09' (thick cable)
Power voltage				20 to 30 VDC, including ripple, Ripple (P-P): 10 % max. Class 2 (Supplied via connected sensor amplifier)
Power consumption				660 mW or less (at 30 V, 22 mA max.)
Environmental resistance	Pollution degree			2
	Ambient temperature			-20 to +55 °C -4 to 131 °F (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material				Main unit case and dust cover: Polycarbonate, DeviceNet® connector: Polyamide (plug), PUT (socket)
Weight				Approx. 80 g
^1 For connecting with sensor, please refer to the user's Manual ^2 "D-bus" is the name of KEYENCE's wiring-saving system for sensor amplifiers.

Keyence AP-V87W Keyence

0.00 kr

Sold Out

Specifications

Model		AP-V87W
Type		Differential pressure type (Panel), NPN
Display		2-level display with 4 1/2-digit, 7-segment LED (Character height: Upper level: 8 mm 0.32", red, Lower level: 5.7 mm 0.22", green) Alarm indicator: Red LED
Operation indicator		Red LED x 3 (corresponding to control output 1 and 2)
Display resolution		AP-10SK/AP-11SK: Standard mode 0.1inchHg, High-resolution mode 0.01inchHg AP-12SK:Standard mode/0.01PSI, High-resolution mode/0.001PSI AP-13SK:Standard mode/0.1PSI, High-resolution mode/0.01PSI AP-14SK:Standard mode/1PSI, High-resolution mode/0.1PSI AP-15SK/AP-16SK:Standard mode/10PSI, High-resolution mode/1PSI
Power consumption	Normal	12V:1680mW(140mA) or less 24V:2520mW(105mA) or less^*1
	Eco mode	12V:1200mW(100mA) or less 24V:2160mW(90mA) or less^*1
Hysteresis		Variable (Standard: 0.5% of FS; high-resolution: 0.1% of F.S.)
Response time (Chattering prevention function)		Selectable from 10, 100, 500 and 1000 ms
I/O	Analog output	4 to 20 mA, Maximum load resistance: 260Ω .
	Zero-shift input	Input time of 20 ms or more. (or analog output selectable)
	Bank input
	Control output	NPN (PNP) open collector x 2 channels (N.O./N.C. selectable), 40 VDC (30 VDC) max., 100 mA max. with residual voltage of 1 V max.
Rating	Power voltage	12 to 24 VDC Ripple (P-P) 10% or less
Environmental resistance	Ambient temperature	-10 to +50°C (14 to 122°F), No condensation
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Material		Housing and cover: Polycarbonate, Keytop: Elastomer
Accessories		AP-V85W (P) / V87W (P): Panel mounting bracket, protective cover
Weight		Approx. 90 g
^*1 Excluding the current for analog output Including the current for the sensor head

Keyence ER-C30 Keyence

0.00 kr

Sold Out

Specifications

Model				ER-C30
Type				M30 Through-Metal cap (×2)
Material				SUS303
Weight				Approx. 70 g 2.47 oz

Keyence OP-094 (OP-0094) Keyence

0.00 kr

Sold Out

Specifications

Model				OP-094
Type				Short Bar
Overview				Short bar to connect 2 proximity sensors ES-32DC located nearby.
Applicable product				ES-32DC
Number included				4 pcs.
Material				Nickel plated brass

Keyence OP-42214 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-42214
Type				Silicon electrode probe
Applicable product				SJ-R/SJ-M030C/M070C
Material				Silicon

Keyence GL-VM18LP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM18LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			18
Total length			720 mm 28.35"
Detection height			680 mm 26.77"
Protection height			765 mm 30.12"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.6
		OFF→ON	46.7 ^*3
		All blocked→ON	52.9 ^*4
	With channel A or B	ON→OFF	12.0
		OFF→ON	57.6 ^*3
		All blocked→ON	73.9 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	94 ^*5
		Receiver	107 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	51 ^*5
		Receiver	57 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		480 g 16.94 oz
	Receiver
	Total		960 g 33.88 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence OP-84253 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-84253
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V80HM, SL-V40LM
Number included				1 pcs.
Length				1,604 mm 63.15"
Material				Translucent plastic: Polycarbonate Black plastic: ABS

Keyence OP-88641 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88641
Type				Polarizing filter (Monochrome)
Weight				Approx. 4 g

Keyence EV-130MSO(2064) Keyence

0.00 kr

Sold Out

Specifications

Model		EV-130MSO(2064)^*1
Type		Shielded
Shape		M30
Detecting distance		10 mm 0.39" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		30 x 30 mm 1.18" x 1.18"
Hysteresis		10% max. of detecting distance
Response frequency		250 Hz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -25 to +70°C -13 to +158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Reversed polarity, short-circuit, surge voltage
Cable length		500 mm19.685"
Rating	Power voltage	12 to 24 VDC
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Case material		Nickel-plated brass
Weight		Approx. 245 g
^*1 This product does not comply with EMC directive.

Keyence OP-88449 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88449
Length				5 m 16.4'
Material				PUR
Weight				Approx. 200 g 7.05 oz

Keyence OP-87774 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88028 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88028^*1
Cable end				Sensor side: M12 4-pin L-shape, Controller side: Connector
Length				10 m 32.81'
Material				PVC (Polyvinyl chloride)
Weight				Approx. 280 g
^*1 The 10 m 32.81' cable includes one spare connector for the controller side.

Keyence XG-8002 Keyence

100,289.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-EP21V Keyence

6,514.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.