Machine Vision Systems

28,372.00 kr

Only 5 units left

Specifications

Model				MB3-H3D1
Type				3D add-in software for Marking Builder 3 (marking on plane, cylinder, cone, or sphere; Z-MAP marking)
Supported operating systems				Windows 11, 10, 8.1, 8, 7 (SP1 or later) ^*1
Supported languages				English, Japanese, Simplified Chinese, German, Korean, French, Spanish, Thai, Italian.
^*1 Windows is either registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Keyence GL-R159F Keyence

29,655.00 kr

In stock, 11 units

Specifications

Model			GL-R159F
Detection capability			ø0.55" ø14 mm
Total length			62.99" 1600mm
No. of beam			159
Detection height			62.20" 1580mm
Protection height			63.15" 1604mm
Beam axis spacing/Lens diameter			10 mm 0.39" / ø4 ø0.16"
Detecting distance			0.66 to 32.81' 0.2 to 10 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	21.6
		OFF→ON	71.2^*2
		All blocked→ON	123.3^*3
	Optical synchronization system (Channel A or B)	ON→OFF	33.0
		OFF→ON	88.3^*2
		All blocked→ON	168.7^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	85
		Receiver	102
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		2300 g
	Receiver
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence GL-R44H Keyence

9,734.00 kr

In stock, 11 units

Specifications

Model			GL-R44H
Detection capability			ø0.98" ø25 mm
Total length			34.65" 880mm
No. of beam			44
Detection height			33.86" 860mm
Protection height			35.63" 905mm
Beam axis spacing/Lens diameter			20 mm / ø5 0.79" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	9.2
		OFF→ON	52.6^*2
		All blocked→ON	73.5^*3
	Optical synchronization system (Channel A or B)	ON→OFF	12.9
		OFF→ON	58.2^*2
		All blocked→ON	88.6^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	66
		Receiver	77
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1220 g
	Receiver
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence GL-VM12LN Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM12LN
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			12
Total length			480 mm 18.90"
Detection height			440 mm 17.32"
Protection height			525 mm 20.67"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.3
		OFF→ON	46.2 ^*3
		All blocked→ON	51.9 ^*4
	With channel A or B	ON→OFF	11.0
		OFF→ON	56.8 ^*3
		All blocked→ON	71.5 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	77 ^*5
		Receiver	90 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	50 ^*5
		Receiver	57 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		320 g 11.29 oz
	Receiver
	Total		640 g 22.59 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence ER-U12P Keyence

0.00 kr

Sold Out

Specifications

Model		ER-U12P
Type		Ultra-long distance unshielded type Screw type M12 Cable PNP output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		Available
Button	Function	Distance switching
Detecting distance	With default settings (Mode 1)	18 mm 0.71" ±10% ^*2
	With distance switching (Mode 2)	12 mm 0.47" ±10% ^*2
Response frequency	With default settings (Mode 1)	15 Hz ^3 ^4
	With distance switching (Mode 2)	50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		54 × 54 mm 2.13" × 2.13"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 50 mA or less for 1 output, or 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Button: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 75 g 2.65 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence EM-054A Keyence

0.00 kr

Sold Out

Specifications

Model		EM-054A^*1
Type		Shielded
Shape		5.4 mm 0.21" dia Cylindrical.
Detecting distance		1.2 mm 0.05" ±10%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		6 x 6 mm 0.24"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Control output		NPN: 200 mA (40 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*2
	Current consumption	12 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 40 g (including nuts and 2-m 6.6' cable)
^1 The alternate-frequency type of EM-054 ^2 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.

Keyence IV4-G400MA Keyence

0.00 kr

Sold Out

Specifications

Model		IV4-G400MA
Type		Long range, narrow field of view model
Installed distance		From 400 mm 15.75"
Field of view		Installation distance of 400 mm 15.75": 58 (H) × 44 (V) mm to Installation distance of 3000 mm 118.11": 464 (H) × 348 (V) mm (reference value)
Image receiving element	Type	1/2.9 inch monochrome CMOS
	Number of pixels	1280 (H) × 960 (V)
Focus adjustment		Auto ^*1
Exposure time		12 μs to 9 ms ^2 ^3
Lights	Illumination	Infrared LED
	Lighting method	Pulse lighting
Indicators		2 indicators (both displaying same content)
Power supply	Average power consumption	2.5 W (without AI imaging illumination unit installed) 6.6 W (with AI imaging illumination unit installed)
Environmental resistance	Enclosure rating	IP67 ^*4
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing) ^*5
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	Frequency: 10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² 3 times in each of 6 directions
Material		Main unit case: Zinc die-casting. Front cover: Acrylic. Operation indicator cover: TPU ^*6
Weight		Approx. 75 g 2.65 oz (no AI imaging illumination unit) Approx. 225 g 7.94 oz (with AI imaging illumination unit)
^1 Focus position can be automatically adjusted during installation. It cannot be adjusted while running. Focus position can be registered separately for each program. ^2 With an AI imaging illumination unit installed, exposure time is up to 6.25 ms. ^3 Maximum exposure time is 500 ms only when lighting is set to OFF. ^4 Except when polarizing filters (OP-88642/OP-88643/OP-88646/OP-88647) are installed. ^5 When the operating ambient temperature exceeds 40°C 104°F, install in accordance with KEYENCE instructions, taking appropriate measures for heat dissipation to ensure that the case temperature does not exceed the rated 65°C 149°F. For the case temperature, measure the side with the “IV4 series” label. ^6 ESD safe and IEC61340-5-1 compliant.

Keyence OP-88775 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VB31 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-VB31
Number included				2
Material				SUS304, NBR
Weight				140 g 4.94 oz ^*1
^*1 GL-V Mounting includes two mounting brackets. The weight stated is for both items.

Keyence LV-H32 Keyence

2,632.00 kr

Only 7 units left

Specifications

Model		LV-H32
Type		Adjustable beam spot
FDA (CDRH) Part 1040.10		Class II
Light source		Visible red semiconductor laser
Wavelength		660 nm
Detecting distance	FINE	30 to 250 mm 1.181" to 9.842"
	TURBO	30 to 500 mm 1.181" to 19.685"
	SUPER	30 to 1000 mm 1.18" to 39.37"
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Material	Case	Glass reinforced plastic ^*1
	Lens cover	Acrylic ^*2
Weight		Approx. 45 g
^1 Norbornene plastic or acrylic ^2 The LV-H32 and the LV-H37 receivers are polyarylate.

Keyence GL-S12FH-R Keyence

3,622.00 kr

Only 2 units left

Specifications

Model				GL-S12FH
Type				Flat type
Detection capability				ø25 mm ø0.98"
Total length				259.5 mm 10.22"
No. of beam				12
Detection height				220mm 8.66"
Protection height				266mm 10.47"
Beam axis spacing				20 mm 0.79"
Operating distance				0.1 to 2 m 0.3' to 6.6'
Effective aperture angle				Max. ±3.75° (when the operating distance is 2 m 6.6')
Light source				Infrared LED (870 nm)
Response time(ms)	Wire synchronization, one-line, or optical synchronization system (channel 0)	ON→OFF		6.6 ^*1
		OFF→ON		48.7 ^1 ^2
		All blocked→ON		63.1 ^1 ^3
	Optical synchronization system (channel A or B)	ON→OFF		7.4 ^*1
		OFF→ON		49.9 ^1 ^2
		All blocked→ON		66.3 ^1 ^3
OSSD operation				Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver				Optical synchronization or wire synchronization (determined by the wiring)
Light interference prevention function				Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output type			2 transistor outputs (PNP or NPN output is determined by the cable type.)
	Max. load current			Max. 300 mA
	Residual voltage (when ON)			Max. 2.5 V (with a cable length of 5 m 16.4')
	OFF state voltage			Max. 2.0 V (with a cable length of 5 m 16.4')
	Leakage current			Max. 200 µA
	Max. load capacitance			2.2 µF
	Load wiring resistance			Max. 2.5 Ω
Inputs 1 and 2				Short-circuit current: approx. 1 mA
Power supply	Current consumption(mA)	When the center indicator is ON	Transmitter	34^*4
			Receiver	56^*4
		When the center indicator is OFF	Transmitter	27^*4
			Receiver	48^*4
	Power voltage			24 VDC ±20%, ripple (P-P) 10% or less, Class 2
Protection circuit				Reverse current protection, short-circuit protection and surge protection for each output
Approved standards	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety			IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1: 2015 (Category 4, PLe) UL508, UL1998 GB/T4584
Environmental resistance	Enclosure rating			IP65/IP67 (IEC60529)
	Overvoltage category			II
	Ambient light			Incandescent lamp: 3,000 lux or less, Sunlight: 20,000 lux or less
	Operating ambient temperature			-10 to +50 °C 14 to 122 °F (No freezing)
	Operating relative humidity			15 to 85 % RH (no condensation)
	Storage temperature			-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity			15 to 95 % RH
	Vibration resistance			10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance			100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case			Polyarylate
Weight	Transmitter			125 g
	Receiver			130 g
^1 If the response time (ON to OFF) exceeds 18 ms, this unit cannot be used as a certified product based on the Chinese standard GB/T4584 “压力机用光电保护装置技术条件”. In the case of series connection, if the total number of beam axes exceeds 100, the response time must be limited to 30 ms or less. When the GL-S units are connected in series, the response time is calculated according to the following steps; 1. Sum up the response time of all unit. 2. Subtract the following time from the result of previous step. (ON → OFF) One sub unit connected: 2 ms Two sub units connected: 4.2 ms (When using Optical synchronization system and Channel A or B) One sub unit connected: 2.7 ms Two sub units connected: 5.7 ms (OFF → ON) One sub unit connected: 42 ms Two sub units connected: 84 ms ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-S operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-S synchronizes the transmitter and receiver first and then determines the clear or blocked. ^4 The control output (OSSD) current is not included. When inputs are turned ON, the current consumption increases by 1 mA per input.

Keyence OP-88410 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88636 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88636
Type				Adjustable bracket
Weight				Approx. 240 g

Keyence GL-VM16HP Keyence

4,885.00 kr

Only 5 units left

Specifications

Model			GL-VM16HP
Beam axis spacing/Lens diameter			20 mm 0.79": ø5 ø0.197"
Number of beam axes			16
Total length			320 mm 12.60"
Detection height			300 mm 11.81"
Protection height			345 mm 13.58"
Minimum detectable object size			ø25 mm ø0.98" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.5
		OFF→ON	46.5 ^*3
		All blocked→ON	52.5 ^*4
	With channel A or B	ON→OFF	11.7
		OFF→ON	55.8 ^*3
		All blocked→ON	71.5 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	69 ^*5
		Receiver	80 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	50 ^*5
		Receiver	57 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		220 g 7.76 oz
	Receiver
	Total		440 g 15.53 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence CL-P150N Keyence

0.00 kr

Sold Out

Specifications

Model			CL-P150N
Type			Optical unit
Head			CL-P150 ^*1
Reference distance			150 mm 5.91"
Reference measurement range	Measurement range		±35 mm ±1.38"
	Linearity		±5.65 μm ±0.000222" ^*2
High precision measurement range	Measurement range		±15 mm ±0.59"
	Linearity		±4.65 μm ±0.000183" ^*2
Resolution			0.25 μm 0.000010"
Spot diameter			ø75 μm ø0.0030"
Laser class	Optical unit		Class I
Sampling cycle			100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head	IP67 (IEC60529)
	Ambient light		Target surface illuminance: 30000 lux (Incandescent lamp)
	Ambient temperature		0 to 50°C 32 to 122°F
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance	Head	10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance		15 G, 6 ms
Temperature characteristic	Head		0.005% of F.S./°C
	Optical unit		0.015% of F.S./°C
Material	Head		Front: SUS, Rear: Aluminum
	Optical unit		Polycarbonate
Weight	Head		Approx. 380 g 13.41 oz
	Optical unit		Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface).

Keyence ER-GW08N Keyence

0.00 kr

Sold Out

Specifications

Model		ER-GW08N
Type		Weld-resistant all-metal shielded type Screw type M8 Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	3 mm 0.12" ±10% ^*2
	With distance switching (Mode 2)	1.5 mm 0.06" ±10% ^*2
Response frequency		2 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (+55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +85°C -13°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G² /Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and case: SUS303 with ceramic coating, Button: PBT, Nut: SUS303 with ceramic coating, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP) [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence FU-25 Keyence

1,317.00 kr

In stock, 12 units

Specifications

Model		FU-25^*1
Size		M6
Detection arrangement		Coaxial
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2×2
Shape		Straight
Minimum bend radius		R25 mm0.984"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 18 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence OP-83210 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-83210
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V120H, SL-V60L
Number included				1 pcs.
Length				2,390.2 mm 94.1"
Material				Translucent plastic: Polycarbonate Black plastic: ABS
Note				To install this product on both the transmitter and receiver, 2 sets are required. Use the dimming filters (sold separately) by attaching them to the front protection cover. When the front protection cover is attached, the L-shaped mounting bracket (OP-42

Keyence OP-88105 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88105
Type				Rear Mounting Bracket
Applicable product				AI-H050, AI-H100, AI-H160
Note				Standard/Long Range, for Separate Amplifier

Keyence GL-SA12S Keyence

0.00 kr

Sold Out

Specifications

Model				GL-SA12S
Type				Protection cover Slim type for 12 beam axes
Overview				This protective case protects the main unit from impacts.
Applicable product				GL-S12SH
Number included				1
Length				262.6 mm 10.34"
Material				aluminum
Note				2 each of the following are included: hexagon socket head cap screw (width across flats: 3 mm), washer, and special hexagon socket head cap screw (M4, length: 13 mm, width across flats: 3 mm).
Weight				90 g

Keyence FU-V7FN Keyence

0.00 kr

Sold Out

Specifications

Model		FU-V7FN^*1
Type		Atmosphere-side fiber unit (thrubeam model heat resistant to 70°C 158°F)
Detecting method		Thrubeam
Fibre unit diameter		ø2.2
Minimum bend radius		R25 mm0.984" or more
Minimum detectable object		Opaque material with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 30 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence CA-CN17L Keyence

3,080.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-M200 Keyence

10,479.00 kr

Only 9 units left

Specifications

Model		SJ-M200
Type		Controller
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec. max.^*1
Ion balance		±15 V^*2
Supply pressure range		0.001 to 0.5 MPa^*3
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10%
	Current consumption	450 mA max.
Environmental resistance	Ambient temperature	0 to +40°C 32 to +104°F
	Relative humidity	35 to 65%RH (no condensation)^*3
Weight		Approx. 300 g
^1 Operating distance: 50 mm 1.97", Air volume: 60 NL/min, (Ambient temperature: 20 to 30°C 68 to 86°F, Ambient humidity: 40 to 60%RH) ^2 Operating distance: 50 mm 1.97", Air volume: 20 NL/min, (Ambient temperature: 20 to 30°C 68 to 86°F, Ambient humidity: 40 to 60%RH) ^*3 For derating of humidity and pressure during use at an ambient temperature higher than 35°C 95°F, contact KEYENCE. For air supply, use clean dry air with -20°C -4°F or lower dew point. The minimum air volume varies depending on the nozzle type. Contact KEYENCE for more information.

Keyence BT-600B Keyence

22,602.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.