Machine Vision Systems

0.00 kr

Sold Out

Specifications

Model				OP-88455
Length				2 m 6.6'
Material				PUR
Weight				Approx. 80 g 2.82 oz

Keyence KV-NC32EXT Keyence

17,686.00 kr

Only 8 units left

Specifications

Model				KV-NC32EXT
Expansion input unit	External connection method			Connector
	Input Points			32
	Input terminals			24 VDC mode
	Maximum input voltage			26.4 VDC
	Input rated voltage	24 VDC mode		3.6 mA
		5 VDC mode		―
	Minimum ON voltage	24 VDC mode		19 V
		5 VDC mode		―
	Maximum OFF current	24 VDC mode		1.5 mA
	Maximum OFF voltage			―
	Common method			32 points/1 common (2 terminals)^*1
	Input time constant (four-level switching)	Input time constant setting	OFF to ON: Typ.	25 μs : 10 μs 300 μs : 240 μs 1 ms : 1 ms 10ms : 10 ms
			OFF to ON: Max.	25 μs : 50 μs 300 μs : 290 μs 1 ms : 1.2 ms 10ms : 11 ms
			ON to OFF: Typ.	25 μs : 50 μs 300 μs : 280 μs 1 ms : 1 ms 10ms : 10 ms
			ON to OFF: Max.	25 μs : 150 μs 300 μs : 390 μs 1 ms : 1.2 ms 10 ms : 11 ms
	Input impedance			6.3 kΩ
Expansion output unit	Output Points			32
	External connectionmethod			MOSFET (N-ch) (with overcurrent protection function) ^*2
	External connection method			Connector
	Rated load			30 VDC 0.2 A ^*3
	Leakage current (when output is OFF)			100 μA or less
	Residual voltage (at ON)			0.6 VDC or less
	Common method			32 points/1 common (2 terminals) ^*1
	Response time	OFF to ON		100 μs or less (with a load of 1 mA or more)
		ON to OFF		200 μs or less (with a load of 1 mA or more)
Internal current consumption				60 mA or less
Weight				Approx. 150 g
^1 The input COM and output COM terminals are independent. ^2 If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common, until the cause of the problem is removed. ^*3 Rated load of each common is 1.6 A.

Keyence OP-88095 Keyence

5,637.00 kr

Only 1 unit left

Specifications

Model				OP-88095
Type				Cable for Separate Amplifier Models: For Amplifier (Connector Type)
AC/DC				24 V DC
Cable end				M8 Wiring Harness
Length				2 m 6.56'
Weight				Approx. 55 g

Keyence KV-16RW Keyence

4,678.00 kr

Only 7 units left

Buy the Keyence KV-16RW PLC Module - a programmable logic controller component from Keyence's industrial automation platform. Provides reliable process control, I/O interfacing, and communication capabilities for manufacturing and process systems. The Keyence KV-16RW is a direct drop-in replacement for existing PLC installations.

Keyence GL-SP5P Keyence

0.00 kr

Sold Out

Specifications

Model				GL-SP5P
Type				Standard cable
Applicable product				GL-S Series main unit
Number included				1 (set includes transmitter and receiver)
Cable end				Main unit connection connector - Loose wires
Output				PNP
Number of core				6
Length				5 m 16.40'
Note				For use with wire synchronization and optical synchronization systems
Weight				260 g

Keyence GS-MA9U Keyence

0.00 kr

Sold Out

Specifications

Model				GS-MA9U
Type				Coding level: High
Applicable model				High Holding force model GS-M9 Series

Keyence FD-XS20 Keyence

10,356.00 kr

In stock, 12 units

Specifications

Model				FD-XS20
Supported pipe materials				Metal pipes, Plastic pipes (soft/hard) ^*1
Supported fluids				Liquids (water, oil, adhesive, grease, chemical solutions, etc.) ^*1
Supported fluid temperature				0 °C (no freezing on the pipe surface) to 100 °C 32 to 212 °F (Pipe surface temperature)
Clamp set model	Plastic pipe/tube attachment			FD-XC20R1, FD-XC20R2, FD-XC20R3, FD-XC20R4
	Metal pipe attachment			FD-XC20M1, FD-XC20M2^*2
Maximum rated flow rate				Outer diameter of pipe 3/8 " (9.53 mm) , ø 10 0.39 ", ø 10.5 0.41 ": 0 to 15.00 L/min Outer diameter of pipe ø 12 0.47 ", 1/2 " (12.7 mm) , ø 13.8 0.54 ": 0 to 20.00 L/min
Zero cut flow rate				0.10 L/min (standard), 40 mL/min (high resolution^3)^4 (variable, default)
Display resolution	Instantaneous flow rate			0.001/0.01/0.1 L/min (standard), 0.1/1/10 mL/min (high resolution^*3) (Displayed on controller)
	Shot amount			0.001/0.01/0.1 L (standard), 0.001/0.01/0.1/1 mL (high resolution^*3) (Displayed on controller)
Repeatability	Plastic pipe/tube attachment	Response time: 50 ms	F.S.	± 0.1 %^5^6
			Instantaneous flow rate	Outer diameter of pipe 3/8 " (9.53 mm) , ø 10 0.39 ": ±15 mL/min Outer diameter of pipe ø 12 0.47 ", 1/2 " (12.7 mm): ±20 mL/min^5^6
		Response time: 500 ms		Outer diameter of pipe 3/8 " (9.53 mm) , ø 10 0.39 ": ±4.7 mL/min Outer diameter of pipe ø 12 0.47 ", 1/2 " (12.7 mm): ±6.3 mL/min^*5
	Metal pipe attachment	Response time: 50 ms	F.S.	±0.15 %^5^6
			Instantaneous flow rate	Outer diameter of pipe 3/8 " (9.53 mm) , ø 10 0.39 ", ø 10.5 0.41 ": ±23 mL/min Outer diameter of pipe ø 12 0.47 ", 1/2 " (12.7 mm) , ø 13.8 0.54 ": ±30 mL/min^5^6
		Response time: 500 ms		Outer diameter of pipe 3/8 " (9.53 mm) , ø 10 0.39 ", ø 10.5 0.41 ": ±7.2 mL/min Outer diameter of pipe ø 12 0.47 ", 1/2 " (12.7 mm) , ø 13.8 0.54 ": ±9.5 mL/min^*5
Hysteresis				Variable
Integrated unit display				0.01/0.1/1/10/100 L (standard), 0.1/1/10/100/1000/10000 mL (high resolution^*3) (displayed on controller)
Display method				Status indicator
Environmental resistance	Enclosure rating			IP65/IP67 (IEC60529) , IP68G (JIS C0920) ^*7
	Ambient temperature			-10 to 60 °C (No freezing) 14 to 140 °F
	Relative humidity			35 % to 85 %RH (No condensation)
	Vibration resistance			10 to 55 Hz, double amplitude 1.5 mm 0.06 ", 2 hours each for X,Y,Z direction
	Shock resistance			50 G 11 ms 3 times each for X,Y,Z direction
Material	Sensor head			Head body: PPS/PPSU, in-cable amplifier: PPS, cable: PVC, controller connector: PPS/PBT/POM
	Clamp set	For plastic pipe		Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7
		For metal pipe		Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7
Weight				Approx. 260 g
^1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe. ^2 When using stainless steel or iron pipes, the ideal pipe wall thickness is as follows, FD-XS1: approx. 0.5 mm 0.02", FD-XS8: approx. 1 mm 0.04", FD-XS20: approx. 1 0.04" to 2 mm 0.08". FD-X signal strength and stability will decrease as the thickness of the pipe wall increases or decreases from the suggested size. ^3 Only controllers with serial numbers beginning with “G” (FD-XA1/XA2/XA5) are supported. ^4 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate. ^5 This specification is valid when the flow velocity distribution is stable. This value does not take into account the effects of pulsation or fluctuations in flow velocity distribution due to facility factors. Convert the F.S. (full scale value) listed in the table according to the rated flow range. ^6 The longer the response time is set, the more repeatability is improved. As a guideline, use √ (50 ms/response time) times. ^*7 The connector part of the sensor head cable is IP65/IP67.

Keyence CV-5001P Keyence

24,813.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88680 Keyence

4,250.00 kr

Only 10 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87422 Keyence

0.00 kr

Sold Out

Specifications

Model		OP-87422
Power supply	Power voltage	24 to 36 V DC ± 10%
	Power consumption	40 mA (at 24 V)/50 mA (at 36 V)
Environmental resistance	Ambient temperature	0 to 50°C
	Relative humidity	30 to 80% RH (No condensation)
Weight		60 g

Keyence CA-LH75 Keyence

7,933.00 kr

Only 3 units left

Specifications

Model				CA-LH75
Focal point				75 mm 2.95"
F-stop range (aperture)				F2.5 to F22
Minimum WD				1.2 m 3.9'
Mount				C-mount
Filter size				34.0 mm 1.34" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.1 % (-0.05 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 105 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence OP-88675 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87910 Keyence

1,825.00 kr

Only 6 units left

Specifications

Model				OP-87910
Type				Adjustable bracket
Weight				Approx. 75 g

Keyence LV-H42 Keyence

3,490.00 kr

Only 5 units left

Specifications

Model		LV-H42
Type		Long-distance area
FDA (CDRH) Part 1040.10		Class II
Light source		Visible red semiconductor laser
Wavelength		660 nm
Detecting distance	FINE	250 mm 9.84"
	TURBO	500 mm 19.69"
	SUPER	1000 mm 39.37"
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Material	Case	Glass reinforced plastic
	Lens cover	Polyarylate
Weight		Approx. 45 g

Keyence AI-H050 Keyence

12,670.00 kr

Only 6 units left

Specifications

Model		AI-H050
Installation Distance		45 to 55 mm 1.77 to 2.17"
Detection Area	1X Zoom to 4X Zoom	4 × 4 mm 0.16 × 0.16" to 16 × 16 mm 0.63 × 0.63"^*1
	Digital Zoom	1X to 4X (17 steps) adjustment, zoom position adjustment^*1
Light Receiving Element		BW CMOS
Transmitter	Light Source	Red LED (660 nm)
	Lighting Method	Pulse lighting
Indicators		1 (green/red/orange)
Environmental resistance	Enclosure rating	IP67^*2
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of 6 directions
Materials		Main unit case: Zinc die-cast/PBT; Front cover: Acrylic (hard coat); Cable: PVC Operation indicator: PPSU; Polarized filter case: POM
Weight		Approx. 70 g (including polarized filter)
^1 When positioned in the midpoint of the installation distance range. ^2 Except when polarized filters or dome filters are mounted.

Keyence OP-88202 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EM-054B Keyence

0.00 kr

Sold Out

Specifications

Model		EM-054B^*1
Type		Shielded
Shape		5.4 mm 0.21" dia Cylindrical.
Detecting distance		1.2 mm 0.05" ±10%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		6 x 6 mm 0.24"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Control output		NPN: 200 mA (40 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*2
	Current consumption	12 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 40 g (including nuts and 2-m 6.6' cable)
^1 The alternative-frequency type of EM-054 ^2 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.

Keyence LV-22P Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DX-OCR1 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-E204A Keyence

0.00 kr

Sold Out

Specifications

Model		SJ-E204A
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 V
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±30 V^*1
Installation distance		50 to 2000 mm 1.97" to 78.74"
Control input	Static elimination stop input	NPN open collector or contact point signal without voltage
Control output	Ion level warning, condition warning, alarm output	NPN open collector, Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc 1/8
Air supply pressure		0.1 MPa to 0.5 MPa^*2 (recommended air pressure of 0.2 MPa)
Effective length		2100 mm 82.68"^*3
Total length		2000 mm 78.74"
No. ofelectrodes		33
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	700 mA (at 24 V), 500 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		2100 g 74.08oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" or more, Air supply pressure: 0.2 Mpa, Frequency: The highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^*3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence XC-T34E2 Keyence

0.00 kr

Sold Out

Specifications

Model		XC-T34E2
Rated voltage		125 VAC/DC
Rated current		1 A/pin
Ambient operating temperature		−40 to +80°C −40 to +176°F
Screw torque		0.5 N·m (max.)
Applicable wire diameter		AWG24 to 12
Environmental resistance	Insulation resistance	500 VDC, 500 MΩ or greater
	Withstand voltage	500 VAC, 1 minute, 1 mA or less

Keyence OP-88418 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-93 Keyence

11,245.00 kr

Only 5 units left

Specifications

Model		FU-93
Type		Reflective model fiber unit
Detecting method		Wetted type
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.3×2
Minimum bend radius		Fluorocarbon polymer part : R40 mm1.575"^*1 fiber part : R25
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 78 g
^*1 The section 80 mm in length from the tip cannot be bent.

Keyence OP-88917 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.