Machine Vision Systems

0.00 kr

Sold Out

Specifications

Model				OP-86936
Type				Vertical Fittings
Applicable product				SZ
Material				SPHC
Weight				Approx. 180 g

Keyence GL-VP2S Keyence

0.00 kr

Sold Out

Specifications

Model				GL-VP2S
Type				Main unit connection cable
Number included				Transmitter and Receiver cable set
Cable end				Female side: Both transmitter/receiver M12 connector 5 pin Male side: Transmitter: strand wire 2-core Receiver strand wire 5-core
Number of cores				2-core and 5-core set
Length				2 m 6.6'
Material				connector: PVC/Nickel-plated brass cable: PVC
Weight				220 g

Keyence GL-SP5N1 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-SP5N1
Type				One-line systemdedicated cable
Applicable product				GL-S Series main unit
Number included				1
Cable end				Main unit connection connector - Loose wires
Output				NPN
Number of core				6
Length				5 m 16.40'
Weight				130 g

Keyence LV-B101 Keyence

0.00 kr

Sold Out

Specifications

Model				LV-B101
Type				Mounting Bracket for Portrait Orientation
Applicable product				LV-NH100/NH110/H100/H110

Keyence OP-87437 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-GD65B Keyence

0.00 kr

Sold Out

Specifications

Model				FD-GD65B
Pipe size/Outer diameter				2 1/2" (65 A) ø72 to ø78 mm ø2.83" to ø3.07"
Lmin				471 mm 18.54"
Lmax				1900 mm 74.80"
Length x quantity in pack				320 12.60" × 1
Weight				Approx. 0.52 kg

Keyence KV-NC16EXT Keyence

12,557.00 kr

Only 7 units left

Specifications

Model				KV-NC16EXT
Expansion input unit	External connection method			Connector
	Input Points			16
	Input terminals			24 VDC mode, 5 VDC mode
	Maximum input voltage			26.4 VDC
	Input rated voltage	24 VDC mode		5.2 mA
		5 VDC mode		1 mA
	Minimum ON voltage	24 VDC mode		19 V
		5 VDC mode		3.5 V
	Maximum OFF current	24 VDC mode		1.5 mA
	Maximum OFF voltage			1.5 V
	Common method			16 points/1 common (1 terminal)^*1
	Input time constant (four-level switching)	Input time constant setting	OFF to ON: Typ.	25 μs : 10 μs 300 μs : 240 μs 1 ms : 1 ms 10ms : 10 ms
			OFF to ON: Max.	25 μs : 50 μs 300 μs : 290 μs 1 ms : 1.2 ms 10ms : 11 ms
			ON to OFF: Typ.	25 μs : 50 μs 300 μs : 280 μs 1 ms : 1 ms 10ms : 10 ms
			ON to OFF: Max.	25 μs : 150 μs 300 μs : 390 μs 1 ms : 1.2 ms 10 ms : 11 ms
	Input impedance			4.4 kΩ
Expansion output unit	Output Points			16
	External connectionmethod			MOSFET (N-ch) (with overcurrent protection function) ^*2
	External connection method			Connector
	Rated load			30 VDC 0.2 A ^*3
	Leakage current (when output is OFF)			100 μA or less
	Residual voltage (at ON)			0.6 VDC or less
	Common method			16 points/1 common (1 terminal) ^*1
	Response time	OFF to ON		100 μs or less (with a load of 1 mA or more)
		ON to OFF		200 μs or less (with a load of 1 mA or more)
Internal current consumption				30 mA or less
Weight				Approx. 120 g
^1 The input COM and output COM terminals are independent. ^2 If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common, until the cause of the problem is removed. ^*3 Rated load of each common is 1.6 A.

Keyence CL-V020N Keyence

0.00 kr

Sold Out

Specifications

Model				CL-V020N
Type				Optical unit
Head				CL-V020 ^*1
Reference distance				20 mm 0.79"
Reference measurement range	Measurement range			±1.3 mm ±0.05"
	Linearity			±0.45 μm ±0.000018" ^*2
High precision measurement range	Measurement range			±0.5 mm ±0.02"
	Linearity			±0.38 μm ±0.000015" ^*2
Resolution				0.25 μm 0.000010" ^*3
Spot diameter				ø20 μm ø0.0008"
Laser class	Optical unit			Class I
Sampling cycle				100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head		IP40 degassed structure for vacuum environments ^*4
	Ambient light			Target surface illuminance: 30000 lux (Incandescent lamp)
	Operating ambient temperature	Head		-20 to 200°C -4 to 392°F
		Optical unit		0 to 50°C 32 to 122°F
	Relative humidity			85% RH or less (no condensation)
	Vibration resistance	Head		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit		10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance			15 G, 6 ms
	Vacuum			Ultra-high-vacuum environments ^*5
	Explosion-proof	performance	Head	None
			Optical unit
		Zone/Division	Head
			Optical unit
		Ambient temperature	Head
			Optical unit
		Certification number
Temperature characteristic	Head			0.013% of F.S./°C ^*6
	Optical unit			0.015% of F.S./°C
Material	Head			SUS304
	Optical unit			Polycarbonate
Weight	Head			Approx. 100 g 3.53 oz
	Optical unit			Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface). ^3 Value measured using 16,384 average cycles with KEYENCE reference workpiece (mirrored surface). ^4 The enclosure rating is equivalent to IP50 when the included sticker is attached. ^5 Operation verification has been performed in environments of 10^-6 Pa. ^6 These figures are based on the case where a jig made of SUS303 (or SUS304) is fixed between the head and the object.

Keyence GL-VM207FP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM207FP
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			207
Total length			2080 mm 81.89"
Detection height			2060 mm 81.10"
Protection height			2084 mm 82.05"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	12.5
		OFF→ON	59.1 ^*3
		All blocked→ON	77.2 ^*4
	With channel A or B	ON→OFF	43.8
		OFF→ON	128.9 ^*3
		All blocked→ON	190.7 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	191 ^*5
		Receiver	219 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	66 ^*5
		Receiver	80 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1350 g 47.65 oz
	Receiver		1370 g 48.36 oz
	Total		2720 g 96.01 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence EM-010P Keyence

0.00 kr

Sold Out

Specifications

Model		EM-010P
Type		Shielded
Shape		M10 Threaded
Detecting distance		2.0 mm 0.08" ±10%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		10 x 10 mm 0.39" x 0.39"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Output		PNP
Control output		PNP: 200 mA (30 V) max., Residual voltage: 1 V max.
Housing		Cr-plated brass
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*1
	Current consumption	20 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 50 g (including nuts and 2-m 6.6' cable)
^*1 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.

Keyence VT-PW07 Keyence

0.00 kr

Sold Out

Specifications

Model				VT-PW07
Type				7" widescreen protective sheet
Applicable product				for VT5-W07/W07M
Number included				Set of 5 sheets
Note				black, without logo

Keyence OP-87056 Keyence

1,579.00 kr

Only 7 units left

Specifications

Model				OP-87056
Type				Sensor head cable
Applicable product				IL,IG,GV-T Series head
Cable end				M8 straight - e-con
Length				2 m 6.56'
Material				Cable: Polyvinyl chloride (PVC)
Note				The cable is common to the transmitter and receiver sides, and can be used on either of them.
Weight				Approx. 80 g

Keyence GL-R60H-R Keyence

30,078.00 kr

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence NE-Q05P Keyence

11,002.00 kr

Only 6 units left

Specifications

Model				NE-Q05P
General specifications	Current consumption.			2.2 A
	Power voltage			24 VDC ± 10%
	Operating ambient temperature			0 to +50°C 32 to 122°F ^*1 (no freezing)
	Operating ambient humidity			10 to 95%RH (no condensation)
	Storage ambient temperature			-20 to +70°C -4 to 158°F
	Operating environment			Minimal amount of dust and corrosive gas present
	Operating altitude			2000m or less
	Noise immunity			1,500 Vp-p, pulse width: 1 µs, 50 ns (by way of a noise simulator)
	Withstand voltage			1,500 VAC for 1 minute between the power supply terminal and the communication terminal and between all the external terminals and the case
	Insulation resistance			50 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the communication terminal and between all the external terminals and the case)
	Shock resistance			Acceleration: 150 m/s², operating time: 11 ms, 2 times in each of the X, Y, and Z directions
	Overvoltage category			I
	Pollution degree			2
	Vibration resistance	Intermittent vibration	Frequency: 10 to 57 Hz	Amplitude: 0.075 mm^*2
			Frequency: 57 to 150 Hz	Acceleration: 9.8 m/s²^*2
		Continuous vibration	Frequency: 10 to 57 Hz	Amplitude: 0.035 mm^*2
			Frequency: 57 to 150 Hz	Acceleration: 4.9 m/s²^*2
	Weight			Approx 260g
Function/performance specifications	Data transfer speed			10 Mbps, 100 Mbps, automatic support for full duplex and half duplex modes
	MDI/MDI-X automatic switching function			Provided
	Auto-negotiation function
Communicationspecifications	MAC address retention			300 s
Function/performance specifications	Upper limit for the number of MAC addresses that can be registered			2048
	QoS function			Priority control of EtherNet/IP™ cyclic data
	PoE function			2 ports, conforms to IEEE802.3af, supply power: 15.4 W/port (44 to 57 VDC)
Communicationspecifications	Switching type			Store and forward method
	Metal cable	Flow control		Half duplex: back pressure, full duplex: conforms to IEEE802.3x; pose packets are used to perform flow control
^1 This is regulated according to the temperature below the control panel unit. ^2 Conforms to JIS B 3502 IEC61131-2, 10 times respectively in the X, Y, and Z directions, 80 minutes

Keyence OP-87526 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87526
Applicable product				SJ-E Series
Note				This is used when there is a desire to carefully clean a single electrode probe.

Keyence CV-3502P Keyence

79,499.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FS-V11S0 Keyence

0.00 kr

Sold Out

Buy the Keyence FS-V11S0 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FS-V11S0 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence FU-85A Keyence

0.00 kr

Sold Out

Specifications

Model		FU-85A^*1
Heat resistant temperature		105°C 221°F^2^3
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2×2
Minimum bend radius		R25 mm0.984"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*4
Environmental resistance	Ambient temperature	-40 to +105 °C -40 to 221 °F
Weight		Approx. 21 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 When this product is used in an environment with a consistently high temperature, we recommend an ambient usage temperature of 90°C or less. ^3 Use in a dry state. Also, when using the heat resistant type, make a selection with ample room for the ambient temperature. ^4 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence HR-1C3UC Keyence

2,171.00 kr

In stock, 11 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-97P Keyence

11,651.00 kr

Only 2 units left

Specifications

Model		FU-97P^*1
Type		Diffuse-reflective
Standard detection object		Object with a diameter of 200, t = 0.7 mm0.028" glass substrate
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2
Minimum bend radius		R40 mm1.575"
Tightening torque		0.75 Nm or less
Environmental resistance	Enclosure rating	IP67^*2
	Ambient temperature	-40 to +60 °C -40 to 140 °F (No condensation and no freezing)^*3
	Relative humidity	35 to 85 % RH (No freezing and No condensation)^*3
Material		Main unit case : PFA, PVC; tube : PTFE^*4
Accessories		Fiber cutter
Weight		Approx. 75 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 Using this product in high-temperature liquids or steam may lead to penetration of the fluorocarbon polymers, which may cause fluctuations in the received light intensity and damage to the internal components. ^3 Use this product under the condition that if the ambient temperature exceeds 60 °C 140 °F, the absolute humidity is 60 °C 140 °F 85 % RH or less. ^4 No condensation and no freezing. Use this product under the condition that if the ambient temperature exceeds 60°C 140°F, the absolute humidity is 60°C 140°F 85%RH or less.

Keyence CC-1010 Keyence

0.00 kr

Sold Out

Specifications

Model		CC-1010
Printing	Printing method	Piezo ceramics–driven on-demand type
	Max. printing height	2.2" 56.4 mm
	Max. printing width	78.7" 2,000 mm
	Print resolution	360 DPI (V) × 360 DPI (H)^*1
	Max. printing speed	328 ft/min 100 m/min^*2
	Recommended throw distance	Up to 0.6" 15.0 mm
	Printing direction	Horizontal
Environmental resistance	Enclosure rating	IP4X
	Ambient temperature	32 to 104°F 0 to 40°C
	Ambient temperature for storage	14 to 131°F -10 to +55°C (no freezing)
	Ambient humidity for storage	Max. 85% RH (no condensation)
	Relative humidity
Weight		17.0 lb 7.7 kg
^1 Line direction resolution varies depending on line speed. ^2 The resolution is 180 DPI (H).

Keyence OP-93332 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-93332
Type				High-accuracy roller contacts
Applicable product				AT/GT

Keyence OP-89153 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-89153
Type				Sensor head connector, medium (×1)
Material				PA66, polycarbonate
Weight				Approx. 5 g 0.18 oz

Keyence KV-24DTP Keyence

6,106.00 kr

Only 6 units left

Buy the Keyence KV-24DTP - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence KV-24DTP is a direct drop-in replacement for existing installations and ships ready for integration.