Machine Vision Systems

0.00 kr

Sold Out

Specifications

Model				FL-P140
Probe length				1,400^*1
Measurement range (dead zone excluded)				1,365 (1,320)^*2
Weight				Approx. 565 g
^1 Total length including the projected areas of the sensor refer to External Dimension Diagrams for details. Can be shortened up to 100 mm 3.93". ^2 If the probe is shortened

Keyence FD-ECA1 Keyence

9,488.00 kr

Only 3 units left

Specifications

Model		FD-ECA1
Type		Cable type
Number of control outputs		2
Number of analog outputs		1
Number of external inputs
Power supply cable		2 m 6.6', strand wire, 6 cores
Response time (90% response)		50 ms/100 ms/250 ms/1 s/5 s (selectable, initial value: 250 ms)^*1
I/O	Control outputs 1 and 2	Instantaneous flow/Accumulated flow/Alarm output/Pulse output NPN/PNP setting switchable, 100 mA or less total for two outputs, residual voltage: 2.5 V or less
	Analog output	Instantaneous flow 4-20 mA/0-20 mA (switchable), load resistance: 260 Ω or less
	External input	Zero flow/Origin adjust./Reset total Short-circuit current: 1.5 mA or less
Network compatibility		IO-Link^*2
Number of connectible units		─
Protection circuit		Protection against reverse power connection, output overcurrent, output surge, reverse output connection, and incorrect head cable wiring
Power supply	Power voltage	24 VDC +20%/-10% (including ripple), Class2/LPS
	Power consumption	1680 mW^*3excluding load current
Environmental resistance	Ambient temperature	−10°C to +55°C 14 to 131°F (no freezing)^*4
	Relative humidity	35%RH to 85%RH (no condensation)
	Vibration resistance	10 to 500 Hz, power spectral concentration: 0.816 G²/Hz, XYZ axes
	Shock resistance	100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material		Main unit: polycarbonate, FG terminal: copper/iron
Weight		Approx. 90 g 3.17 oz
^1 5 ms is added to the analog output response time and the response is set to 63%. ^2 IO-Link: Compatible with specification v1.1/COM3 (230.4 kbps). ^3 182 mA or less with the load included. ^4 The ambient temperature to use varies depending on the number of adjacent cable type/M12 connector type units or depending on the number of expansion zero line type units added to the system. For 1 or 2 units, the temperature is 55°C 131°F. For 3 to 5 units, the temperature is 50°C 122°F. For 6 to 8 units, the temperature is 45°C 113°F. The prescribed values for the ambient temperature assume that the amplifier unit has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Keyence OP-89110 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87199 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87199
Overview				This is a conversion unit for extending the FS-N10/LV-N10/PS-N10 Series main unit with conventional amplifiers.
Applicable product				FS-N10/LV-N10/PS-N10 Series
Note				The existing amplifier cannot be connected to the main unit.

Keyence OP-88842 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-96659 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-96659
Overview				Connector cable for PZ2 thrubeam. It is printed as P-1S/P-2S.
Applicable product				PZ2 Series thrubeam
Number included				One for transmitter, the other for receiver.
Length				10 m 32.81'

Keyence OP-87742 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87859 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ES-32DC Keyence

1,581.00 kr

In stock, 12 units

Specifications

Model		ES-32DC
Type		DC
Operation mode		N.O./N.C. (switch-selectable)
Indicator		Output: Red LED
Output	Control output	NPN: 200 mA (40 V) max. Residual voltage: 1 V max.
Disconnection alarm output		NPN: 100 mA (40 V) max. Residual voltage: 1 V max.
Leakage current (OFF time)		―
Response time		1 ms max.
Temperature characteristics		±8% of detecting distance at 23°C 73.4°F, within 0 to 50°C 32 to 122°F
Sensitivity adjustment		15-turn trimmer
Rating	Power voltage	10 to 28 VDC, Ripple (P-P) 10 % or less
	Current/power consumption	18 mA max.
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 48 g

Keyence EX-008 Keyence

11,376.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-42197 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-42197
Overview				Reflective tape used with polarized retro-reflective laser sensor (25x25m).
Applicable product				LV-H62, LV-S61
Material				Polycarbonate, Acrylic adhesive
Note				25X25mm, 0.7mm thick

Keyence CA-DBR8 Keyence

12,388.00 kr

Only 1 unit left

Specifications

Model				CA-DBR8
Type				Bar Light
LED color				Red
Diffusion plate				OP-87042
Polarizing plate				OP-87043
Power consumption				3.6 W
Input voltage				12 VDC
Weight				Approx. 60 g

Keyence FS-V11P Keyence

1,561.00 kr

In stock, 12 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XC-T40B2 Keyence

0.00 kr

Sold Out

Specifications

Model		XC-T40B2
Rated voltage		125 VAC/DC
Rated current		1 A/pin
Ambient operating temperature		−40 to +80°C −40 to +176°F
Screw torque		0.8 N·m (max.)
Applicable wire diameter		AWG22 to 16
Environmental resistance	Insulation resistance	500 VDC, 1000 MΩ or greater
	Withstand voltage	500 VAC, 1 minute, 1 mA or less

Keyence LV-20A Keyence

0.00 kr

Sold Out

Specifications

Model		LV-20A
Type		NPN output
Main unit/expansion unit		Expansion unit (0 line)
Control output		NPN open-collector x 2 channels, 40 VDC max., max. 100 mA, residual voltage (1.0 V max.)
Response speed		280 µs to 4.7 ms
Monitor output		NPN output
Number of interference preventive units		FINE : None , TURBO : 2 units , SUPER : 4 units
Protection circuit		Reversed polarity protection, over-current protection, surge absorber
Unit expansion		Up to 7 additional expansion units can be installed (8 units including the main unit),
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less (For the LV-20A/22A/22AP, the power supply voltage is supplied from the main unit.)
	Power consumption	1.5 W max. (125 mA max. for 12 V, 62.5 mA max. for 24 V)
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing) ^*1
	Relative humidity	35 to 85 % RH (No condensation)
Material	Main unit	Polycarbonate
	Case
Weight		Approx. 35 g
^*1 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected. When 2 to 5 units: -10 to +50 °C 14 to 122 °F When 6 to 7 units: -10 to +45 °C 14 to 113 °F When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.

Keyence SJ-E036H Keyence

18,967.00 kr

Only 2 units left

Specifications

Model		SJ-E036H
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 V
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±30 V^*1
Installation distance		50 to 2000 mm 1.97" to 78.74"
Control input	Static elimination stop input	NPN open collector or contact point signal without voltage
Control output	Ion level warning, condition warning, alarm output	NPN open collector, Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Communication function		Remote control communication
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc 1/8
Air supply pressure		0.1 MPa to 0.5 MPa^*2 (recommended air pressure of 0.2 MPa)
Effective length		420 mm 16.54"^*3
Total length		350 mm 13.78"
No. ofelectrodes		9
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	700 mA (at 24 V), 500 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		680 g 23.99oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" or more, Air supply pressure: 0.2 Mpa, Frequency: The highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^*3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence OP-84462 Keyence

0.00 kr

Sold Out

Buy the Keyence OP-84462 Communication Module - an industrial network interface providing controller-to-device connectivity. Supports standard industrial protocols for seamless automation integration. The Keyence OP-84462 is a direct replacement for existing communication installations.

Keyence GL-VM104HN Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM104HN
Beam axis spacing/Lens diameter			20 mm 0.79": ø5 ø0.197"
Number of beam axes			104
Total length			2080 mm 81.89"
Detection height			2060 mm 81.10"
Protection height			2105 mm 82.87"
Minimum detectable object size			ø25 mm ø0.98" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	8.2
		OFF→ON	52.1 ^*3
		All blocked→ON	63.6 ^*4
	With channel A or B	ON→OFF	26.5
		OFF→ON	87.4 ^*3
		All blocked→ON	125.3 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	185 ^*5
		Receiver	201 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	61 ^*5
		Receiver	67 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1350 g 47.65 oz
	Receiver		1370 g 48.36 oz
	Total		2720 g 96.01 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence CV-H035C Keyence

10,897.00 kr

Only 4 units left

Specifications

Model		CV-H035C
Type		Camera^*1
Image element		1/3-inch color CCD image receiving element, 7 x high-speed reading using square-pixel, 340,000 pixels Unit cell size: 7.4 x 7.4 µm 0.29 x 0.29 Mil
Valid pixel count		310,000 pixels 640 (H) × 480 (V) ^*2
Pixel transfer frequency		80 MHz 40 MHz × 2ch
Scanning system		Progressive (4.7 ms)
Transfer system		Digital serial transfer
Electronic shutter		1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 msec to 9000 msec can be set with numeric values
Lens mount		C mount
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 120 g (not including lens)
^1 Only the high-speed camera cable can be used. ^2 In 310,000-pixel mode, 310,000 pixels (640 x 480) serve as the processing area. In 240,000-pixel mode, 240,000 pixels (512 x 480) serve as the processing area.

Keyence OP-88381 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88381^*1
Material				A5052 (black electrode position coating) Trivalent galvanized carbon steel only for camera bracket nuts
Weight				Approx. 800 g (not including camera, illumination, or mounting screws)
^*1 The environmental resistance depends on the specifications of the camera and illumination to be used.