1 year warranty
Model |
WI-5000 |
|||
No. of connectable sensor heads |
1 |
|||
No. of registration settings |
Up to 1000 settings on SD Card 1 and SD Card 2 individually (depending on the capacity and configuration of the SD Card),external switching possible |
|||
No. of measurement tools |
100 tools/setting (20 are intended for position adjustment) |
|||
Measurement mode |
Height |
Height Measurement, Height Difference Measurement, Arranged Multi-Point Height Measurement, Free Multi-Point Height Measurement, Profile Measurement, and Continuous Height Measurement |
||
Dimension measurement |
Measure Distance, Measure Width, Line/Angle, Detect Circle, and Detect Point |
|||
Auxiliary function |
Calculation, Image Region Generator, Line Display, Circle Display, Point Display, and Scale Display |
|||
Interface |
Control input |
20 (Input terminal: 5, Parallel I/O: 15) |
||
Control output |
28 (Output terminal block: 6, Parallel I/O: 22) |
|||
RS-232C |
Value output and control I/O (cannot be used when PLC link using the RS-232C port is in use) |
|||
PLC-Link |
Value output and control I/O using the Ethernet port or RS-232C port (cannot be used when EtherNet/IP™ is in use. |
|||
Ethernet |
Value output and control I/O |
|||
USB |
In addition to value output and control I/O, uploading/downloading inspection settings, various simulations, and transmission/reception/remote connection of image and other data are possible when KEYENCE's PC application software is connected. |
|||
EtherNet/IP™ |
Value I/O and control I/O using the Ethernet port (cannot be used when PLC-Link is in use) |
|||
Mouse |
Menus can be operated with the optional dedicated mouse (OP-87506, included with the controller). |
|||
USB HDD |
Image and other data can be output when a HDD (2 TB max.) is connected to the dedicated USB port (conforms to USB3.0, bus power supported: rated output 900 mA) |
|||
Monitor output |
Analog RGB output XGA 1024 × 768 (24-bit color, 60 Hz) |
|||
Minimum display unit |
0.1 µm, 0.001°, 0.0001 mm2, 0.00001 mm3 |
|||
Display language |
English/Japanese/Chinese (simplified)/Chinese (traditional)/Korean selectable (Initial language should be determined during the initial startup.) |
|||
Rating |
Maximum current consumption |
2.7 A |
||
Power voltage |
24 VDC ±10 % |
|||
Environmental resistance |
Ambient temperature |
0 to +45 °C 32 to 113 °F (DIN rail mounting), 0 to +40 °C 32 to 104 °F (bottom mounting) |
||
Relative humidity |
35 to 85 % RH (No condensation) |
|||
Weight |
Approx. 2,000 g |
|||
*1 Either positive common connecting which is compatible with NPN input devices, or negative common connecting which is compatible with PNP input devices is feasible. | ||||
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator