TM-3001P Keyence

Specifications

Model		TM-3001P
Head compatibility		Compatible
Number of connectable sensors		2 units max.^*1
Display	Minimum display unit	0.01 µm, 0.001 mm², 0.01 °
	Maximum display range	±9999.99 mm ±393.7", ±99999.9 mm², ±99999.9°
Input terminal block	Laser remote interlock input	Non-voltage input^*2
	Trigger input (for Head A)	Voltage input^*2
	Timing 1 input
	Auto-zero 1 input
	Reset input
Output terminal block	Analog voltage output	±10 V x 2 outputs, out put impedance: 100 Ω^*2
	Total judgment output	PNP open-collector output^*2
	Error output	PNP open-collector output (N.C.)^*2
	Process output	PNP open-collector output^*2
	Trigger input enable output
	Adjusted error output
Expansion connector	Trigger input (for Head A)	Voltage input^*2
	Timing 2 input
	Auto-zero 2 input
	Program switching input	Voltage input, 4 inputs^*2
	Memory card save input	Voltage input^*2
	Judgment/Binary output	3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) PNP open-collector output^*3
	Strobe output	PNP open-collector output^*2
	Trigger input enable output
Analog RGB monitor output		SVGA (800 x 600 pixels)
RS-232C interface		Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)
USB interface		In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)
Ethernet interface		1000BASE-T/1000 BASE-TX/10 BASE-T
Memory card		SD card CA-SD4G (4GB), CA-SD1G (1GB) support
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption.	1 head connected 480mA max./ 2 heads connected 550mA max.
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Polycarbonate
Weight		Approx. 1,120 g
^1 1 or 2 units can be connected only with the same head model ^2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA) ^*3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data.

Est. delivery between and

€7.759,95

1-year warranty

FREE WORDWIDE SHIPPING

Condition:

Sealed Surplus

SKU: TM-3001P-Sealed

Sold out

€0,00

Never Used Surplus

SKU: TM-3001P

1 verified stock

€7.759,95

Used

SKU: TM-3001P-Used

2 verified stock

€4.457,95

Variant

Quantity:

Need More?

Specifications

Model		TM-3001P
Head compatibility		Compatible
Number of connectable sensors		2 units max.^*1
Display	Minimum display unit	0.01 µm, 0.001 mm², 0.01 °
	Maximum display range	±9999.99 mm ±393.7", ±99999.9 mm², ±99999.9°
Input terminal block	Laser remote interlock input	Non-voltage input^*2
	Trigger input (for Head A)	Voltage input^*2
	Timing 1 input
	Auto-zero 1 input
	Reset input
Output terminal block	Analog voltage output	±10 V x 2 outputs, out put impedance: 100 Ω^*2
	Total judgment output	PNP open-collector output^*2
	Error output	PNP open-collector output (N.C.)^*2
	Process output	PNP open-collector output^*2
	Trigger input enable output
	Adjusted error output
Expansion connector	Trigger input (for Head A)	Voltage input^*2
	Timing 2 input
	Auto-zero 2 input
	Program switching input	Voltage input, 4 inputs^*2
	Memory card save input	Voltage input^*2
	Judgment/Binary output	3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) PNP open-collector output^*3
	Strobe output	PNP open-collector output^*2
	Trigger input enable output
Analog RGB monitor output		SVGA (800 x 600 pixels)
RS-232C interface		Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)
USB interface		In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)
Ethernet interface		1000BASE-T/1000 BASE-TX/10 BASE-T
Memory card		SD card CA-SD4G (4GB), CA-SD1G (1GB) support
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption.	1 head connected 480mA max./ 2 heads connected 550mA max.
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Polycarbonate
Weight		Approx. 1,120 g
^1 1 or 2 units can be connected only with the same head model ^2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA) ^*3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data.

Model		TM-3001P
Head compatibility		Compatible
Number of connectable sensors		2 units max.^*1
Display	Minimum display unit	0.01 µm, 0.001 mm², 0.01 °
	Maximum display range	±9999.99 mm ±393.7", ±99999.9 mm², ±99999.9°
Input terminal block	Laser remote interlock input	Non-voltage input^*2
	Trigger input (for Head A)	Voltage input^*2
	Timing 1 input
	Auto-zero 1 input
	Reset input
Output terminal block	Analog voltage output	±10 V x 2 outputs, out put impedance: 100 Ω^*2
	Total judgment output	PNP open-collector output^*2
	Error output	PNP open-collector output (N.C.)^*2
	Process output	PNP open-collector output^*2
	Trigger input enable output
	Adjusted error output
Expansion connector	Trigger input (for Head A)	Voltage input^*2
	Timing 2 input
	Auto-zero 2 input
	Program switching input	Voltage input, 4 inputs^*2
	Memory card save input	Voltage input^*2
	Judgment/Binary output	3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) PNP open-collector output^*3
	Strobe output	PNP open-collector output^*2
	Trigger input enable output
Analog RGB monitor output		SVGA (800 x 600 pixels)
RS-232C interface		Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)
USB interface		In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)
Ethernet interface		1000BASE-T/1000 BASE-TX/10 BASE-T
Memory card		SD card CA-SD4G (4GB), CA-SD1G (1GB) support
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption.	1 head connected 480mA max./ 2 heads connected 550mA max.
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Polycarbonate
Weight		Approx. 1,120 g
^1 1 or 2 units can be connected only with the same head model ^2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA) ^*3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator