SJ-F700 Keyence

Specifications

Model			SJ-F700
Voltage application method			Variable DC
Applied voltage			±8200 V max.
Ion balance control method			Multi-I.C.C
Ion balance			When using SJ-FB01: ±1 V ^1 ^2 When not using SJ-FB01: ±3 V ^1 ^2
Static elimination time			Approx. 0.5 s ^3 ^2
Installation distance			50 mm 1.97" or more
Maximum air volume			4.8 m³/min 169.51 ft³/min
Ozone density			0.005 ppm or less
Saved data	Items		Date/time, Ion level, Electrostatic charge level, Air flow, Unit status, Various threshold values, Ion balance, Temperature, Humidity ^*4
	Sampling cycle		0.1 s
	Data history		Data saved every hour
	Event log		Saved events: Errors, Warnings, Charge level threshold exceeded, Ion balance threshold exceeded, Static elimination start/stop, Power ON/OFF, Clean operation Charge level/ion balance outside threshold/event triggered when: Data stored for 30 seconds before and 30 seconds after an event
Other functions			Auto-clean, Sensor feedback
Input	IN1	Static elimination stop input	Bidirectional voltage input Maximum input rating: 26.4 V, ON voltage: 18 V or higher, OFF current: 0.1 mA or lower, ON current: 3 mA or lower (for 24 V)
	IN2	Clean input
	IN3	Event trigger input
Output			Photo MOS relay output, N.O./N.C. switchable, Maximum rating: 26.4 V (50 mA), Residual voltage when ON: 1 V or less
Output	Number of outputs		3 (OUT1 to OUT3)
	Functions		Assignable functions: Static elimination status, Ion level alarm, Condition alarm, Fan rotation speed alarm, Charge level threshold exceeded, System error, Other error, Installation error alarm, Ion balance threshold exceeded, Charged object detection, Feedback sensor error ^*5
Ethernet	Standard		100BASE-TX
	Connector		RJ-45 8-pin connector
Rating	Power voltage		24 VDC ±10% or dedicated AC adapter (OP-88766)
	Current consumption		Normal (including input/output load): 1.6 A or less Normal (excluding input/output load): 1.45 A or less ECO mode: 0.18 A (typical) ^*6
Environmental resistance	Ambient temperature		0 to +40°C 32 to +104°F (0 to +45°C 32 to +113°F when using OP-88767 or OP-88768)
	Relative humidity		35 to 85% RH (no condensation)
	Overvoltage category		I
	Pollution degree		2
Material			Case: PC / ABS ^7, Front ventilation guard: SUS, Rear suction guard: SUS, Louvers: PC / ABS ^7, Display sheet: PC, Operation buttons: PC, Mounting adapter insulation rubber: Silicone rubber, Bottom insulation rubber: Polyurethane, Mounting fixture: PBT, Terminal block: LCP, Ethernet connector: Brass (tin plated), AC adapter connector: PBT, Attached screws: Iron (trivalent chromate)
Weight			Approx. 1.2 kg 2.65 lb
^1 At a distance of 300 mm 11.81" with minimum air flow, straight louvers, and relative humidity of 65% ^2 Conducted in accordance with the following standards: ANSI-ESD-STM3.1, RCJS-TR-5-4, JIS C 61340-4-7, IEC61340-4-7ED.2 ^3 At a distance of 300 mm 11.81" with maximum air flow and straight louvers ^4 Ion balance, temperature, and humidity available only when using the SJ-FB01 ^5 Installation error alarm, ion balance threshold exceeded, charged object detection, and feedback sensor error available only when using the SJ-FB01 ^6 Input/output not used; 24 VDC input ^*7 Sustained electrostatic charge prevention grade

Est. delivery between and

€1.426,95

1-year warranty

FREE WORDWIDE SHIPPING

Condition:

Sealed Surplus

SKU: SJ-F700-Sealed

Sold out

€0,00

Never Used Surplus

SKU: SJ-F700

5 verified stock

€1.426,95

Used

SKU: SJ-F700-Used

Sold out

€0,00

Variant

Quantity:

Need More?

Specifications

Model			SJ-F700
Voltage application method			Variable DC
Applied voltage			±8200 V max.
Ion balance control method			Multi-I.C.C
Ion balance			When using SJ-FB01: ±1 V ^1 ^2 When not using SJ-FB01: ±3 V ^1 ^2
Static elimination time			Approx. 0.5 s ^3 ^2
Installation distance			50 mm 1.97" or more
Maximum air volume			4.8 m³/min 169.51 ft³/min
Ozone density			0.005 ppm or less
Saved data	Items		Date/time, Ion level, Electrostatic charge level, Air flow, Unit status, Various threshold values, Ion balance, Temperature, Humidity ^*4
	Sampling cycle		0.1 s
	Data history		Data saved every hour
	Event log		Saved events: Errors, Warnings, Charge level threshold exceeded, Ion balance threshold exceeded, Static elimination start/stop, Power ON/OFF, Clean operation Charge level/ion balance outside threshold/event triggered when: Data stored for 30 seconds before and 30 seconds after an event
Other functions			Auto-clean, Sensor feedback
Input	IN1	Static elimination stop input	Bidirectional voltage input Maximum input rating: 26.4 V, ON voltage: 18 V or higher, OFF current: 0.1 mA or lower, ON current: 3 mA or lower (for 24 V)
	IN2	Clean input
	IN3	Event trigger input
Output			Photo MOS relay output, N.O./N.C. switchable, Maximum rating: 26.4 V (50 mA), Residual voltage when ON: 1 V or less
Output	Number of outputs		3 (OUT1 to OUT3)
	Functions		Assignable functions: Static elimination status, Ion level alarm, Condition alarm, Fan rotation speed alarm, Charge level threshold exceeded, System error, Other error, Installation error alarm, Ion balance threshold exceeded, Charged object detection, Feedback sensor error ^*5
Ethernet	Standard		100BASE-TX
	Connector		RJ-45 8-pin connector
Rating	Power voltage		24 VDC ±10% or dedicated AC adapter (OP-88766)
	Current consumption		Normal (including input/output load): 1.6 A or less Normal (excluding input/output load): 1.45 A or less ECO mode: 0.18 A (typical) ^*6
Environmental resistance	Ambient temperature		0 to +40°C 32 to +104°F (0 to +45°C 32 to +113°F when using OP-88767 or OP-88768)
	Relative humidity		35 to 85% RH (no condensation)
	Overvoltage category		I
	Pollution degree		2
Material			Case: PC / ABS ^7, Front ventilation guard: SUS, Rear suction guard: SUS, Louvers: PC / ABS ^7, Display sheet: PC, Operation buttons: PC, Mounting adapter insulation rubber: Silicone rubber, Bottom insulation rubber: Polyurethane, Mounting fixture: PBT, Terminal block: LCP, Ethernet connector: Brass (tin plated), AC adapter connector: PBT, Attached screws: Iron (trivalent chromate)
Weight			Approx. 1.2 kg 2.65 lb
^1 At a distance of 300 mm 11.81" with minimum air flow, straight louvers, and relative humidity of 65% ^2 Conducted in accordance with the following standards: ANSI-ESD-STM3.1, RCJS-TR-5-4, JIS C 61340-4-7, IEC61340-4-7ED.2 ^3 At a distance of 300 mm 11.81" with maximum air flow and straight louvers ^4 Ion balance, temperature, and humidity available only when using the SJ-FB01 ^5 Installation error alarm, ion balance threshold exceeded, charged object detection, and feedback sensor error available only when using the SJ-FB01 ^6 Input/output not used; 24 VDC input ^*7 Sustained electrostatic charge prevention grade

Model			SJ-F700
Voltage application method			Variable DC
Applied voltage			±8200 V max.
Ion balance control method			Multi-I.C.C
Ion balance			When using SJ-FB01: ±1 V ^1 ^2 When not using SJ-FB01: ±3 V ^1 ^2
Static elimination time			Approx. 0.5 s ^3 ^2
Installation distance			50 mm 1.97" or more
Maximum air volume			4.8 m³/min 169.51 ft³/min
Ozone density			0.005 ppm or less
Saved data	Items		Date/time, Ion level, Electrostatic charge level, Air flow, Unit status, Various threshold values, Ion balance, Temperature, Humidity ^*4
	Sampling cycle		0.1 s
	Data history		Data saved every hour
	Event log		Saved events: Errors, Warnings, Charge level threshold exceeded, Ion balance threshold exceeded, Static elimination start/stop, Power ON/OFF, Clean operation Charge level/ion balance outside threshold/event triggered when: Data stored for 30 seconds before and 30 seconds after an event
Other functions			Auto-clean, Sensor feedback
Input	IN1	Static elimination stop input	Bidirectional voltage input Maximum input rating: 26.4 V, ON voltage: 18 V or higher, OFF current: 0.1 mA or lower, ON current: 3 mA or lower (for 24 V)
	IN2	Clean input
	IN3	Event trigger input
Output			Photo MOS relay output, N.O./N.C. switchable, Maximum rating: 26.4 V (50 mA), Residual voltage when ON: 1 V or less
Output	Number of outputs		3 (OUT1 to OUT3)
	Functions		Assignable functions: Static elimination status, Ion level alarm, Condition alarm, Fan rotation speed alarm, Charge level threshold exceeded, System error, Other error, Installation error alarm, Ion balance threshold exceeded, Charged object detection, Feedback sensor error ^*5
Ethernet	Standard		100BASE-TX
	Connector		RJ-45 8-pin connector
Rating	Power voltage		24 VDC ±10% or dedicated AC adapter (OP-88766)
	Current consumption		Normal (including input/output load): 1.6 A or less Normal (excluding input/output load): 1.45 A or less ECO mode: 0.18 A (typical) ^*6
Environmental resistance	Ambient temperature		0 to +40°C 32 to +104°F (0 to +45°C 32 to +113°F when using OP-88767 or OP-88768)
	Relative humidity		35 to 85% RH (no condensation)
	Overvoltage category		I
	Pollution degree		2
Material			Case: PC / ABS ^7, Front ventilation guard: SUS, Rear suction guard: SUS, Louvers: PC / ABS ^7, Display sheet: PC, Operation buttons: PC, Mounting adapter insulation rubber: Silicone rubber, Bottom insulation rubber: Polyurethane, Mounting fixture: PBT, Terminal block: LCP, Ethernet connector: Brass (tin plated), AC adapter connector: PBT, Attached screws: Iron (trivalent chromate)
Weight			Approx. 1.2 kg 2.65 lb
^1 At a distance of 300 mm 11.81" with minimum air flow, straight louvers, and relative humidity of 65% ^2 Conducted in accordance with the following standards: ANSI-ESD-STM3.1, RCJS-TR-5-4, JIS C 61340-4-7, IEC61340-4-7ED.2 ^3 At a distance of 300 mm 11.81" with maximum air flow and straight louvers ^4 Ion balance, temperature, and humidity available only when using the SJ-FB01 ^5 Installation error alarm, ion balance threshold exceeded, charged object detection, and feedback sensor error available only when using the SJ-FB01 ^6 Input/output not used; 24 VDC input ^*7 Sustained electrostatic charge prevention grade

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator