NR-CF512 Keyence

Specifications

Model		NR-CF512
Protocol	Supported protocol	CAN: ISO 11898 CAN FD: ISO 11898 ^1^2
	Supported physical layers	ISO 11898 (High Speed)^*3
	Communication speed	CAN: 50 kbps to 1 Mbps CAN FD: (Arbitration) 50 kbps to 1 Mbps, (Data) 500 kbps to 5 Mbps
Port	Number of ports	1 port^4, ^5
	Design	D-sub 9-pin male
Maximum number of messages/maximum number of signals		128 messages/port ^*6 512 signals (ch)/port
Collection period		CAN: Max. sampling cycle of 200 µs CAN FD: Max. sampling cycle of 1 ms
Built-in termination resistor		120 Ω x1 (selectable using software)
Manual transmission/reception		Specify message ID and data to transmit and receive
Withstand voltage	Measurement input terminal - System bus	500 V AC (50 Hz/60 Hz) for 1 minute
Rating	Power consumption	1.6 W max.
Environmental resistance	Ambient temperature	0°C to +40°C 32°F to 104°F (no freezing)
	Relative humidity	10% to 85% RH (no condensation)
Weight		Approx. 140 g 4.94 oz
^1 Switching between CAN and CAN FD is possible in the settings. Simultaneous use within one port is not possible. ^2 Only messages that are not multiplexed to multiple signals are supported. ^3 Excludes the Wake-up Pattern function. ^4 When using CAN protocol, expansion up to 8 ports (8 connected units) is possible with the NR-X, and up to 4 ports (4 connected units) with the NR-500. Each NR-X100W and NR-XR01 group can be connected to a maximum of 4 units, for a total of 8 units. ^5 When using CAN FD protocol, expansion up to 4 ports is possible with the NR-X, and up to 2 ports with the NR-500. Each NR-X100W and NR-XR01 group can be connected to a maximum of 2 units, for a total of 4 units. ^6 If format of the message ID is extended, up to 64 messages are supported.

Price on request
Ask for quote

Specifications

Model		NR-CF512
Protocol	Supported protocol	CAN: ISO 11898 CAN FD: ISO 11898 ^1^2
	Supported physical layers	ISO 11898 (High Speed)^*3
	Communication speed	CAN: 50 kbps to 1 Mbps CAN FD: (Arbitration) 50 kbps to 1 Mbps, (Data) 500 kbps to 5 Mbps
Port	Number of ports	1 port^4, ^5
	Design	D-sub 9-pin male
Maximum number of messages/maximum number of signals		128 messages/port ^*6 512 signals (ch)/port
Collection period		CAN: Max. sampling cycle of 200 µs CAN FD: Max. sampling cycle of 1 ms
Built-in termination resistor		120 Ω x1 (selectable using software)
Manual transmission/reception		Specify message ID and data to transmit and receive
Withstand voltage	Measurement input terminal - System bus	500 V AC (50 Hz/60 Hz) for 1 minute
Rating	Power consumption	1.6 W max.
Environmental resistance	Ambient temperature	0°C to +40°C 32°F to 104°F (no freezing)
	Relative humidity	10% to 85% RH (no condensation)
Weight		Approx. 140 g 4.94 oz
^1 Switching between CAN and CAN FD is possible in the settings. Simultaneous use within one port is not possible. ^2 Only messages that are not multiplexed to multiple signals are supported. ^3 Excludes the Wake-up Pattern function. ^4 When using CAN protocol, expansion up to 8 ports (8 connected units) is possible with the NR-X, and up to 4 ports (4 connected units) with the NR-500. Each NR-X100W and NR-XR01 group can be connected to a maximum of 4 units, for a total of 8 units. ^5 When using CAN FD protocol, expansion up to 4 ports is possible with the NR-X, and up to 2 ports with the NR-500. Each NR-X100W and NR-XR01 group can be connected to a maximum of 2 units, for a total of 4 units. ^6 If format of the message ID is extended, up to 64 messages are supported.

Model		NR-CF512
Protocol	Supported protocol	CAN: ISO 11898 CAN FD: ISO 11898 ^1^2
	Supported physical layers	ISO 11898 (High Speed)^*3
	Communication speed	CAN: 50 kbps to 1 Mbps CAN FD: (Arbitration) 50 kbps to 1 Mbps, (Data) 500 kbps to 5 Mbps
Port	Number of ports	1 port^4, ^5
	Design	D-sub 9-pin male
Maximum number of messages/maximum number of signals		128 messages/port ^*6 512 signals (ch)/port
Collection period		CAN: Max. sampling cycle of 200 µs CAN FD: Max. sampling cycle of 1 ms
Built-in termination resistor		120 Ω x1 (selectable using software)
Manual transmission/reception		Specify message ID and data to transmit and receive
Withstand voltage	Measurement input terminal - System bus	500 V AC (50 Hz/60 Hz) for 1 minute
Rating	Power consumption	1.6 W max.
Environmental resistance	Ambient temperature	0°C to +40°C 32°F to 104°F (no freezing)
	Relative humidity	10% to 85% RH (no condensation)
Weight		Approx. 140 g 4.94 oz
^1 Switching between CAN and CAN FD is possible in the settings. Simultaneous use within one port is not possible. ^2 Only messages that are not multiplexed to multiple signals are supported. ^3 Excludes the Wake-up Pattern function. ^4 When using CAN protocol, expansion up to 8 ports (8 connected units) is possible with the NR-X, and up to 4 ports (4 connected units) with the NR-500. Each NR-X100W and NR-XR01 group can be connected to a maximum of 4 units, for a total of 8 units. ^5 When using CAN FD protocol, expansion up to 4 ports is possible with the NR-X, and up to 2 ports with the NR-500. Each NR-X100W and NR-XR01 group can be connected to a maximum of 2 units, for a total of 4 units. ^6 If format of the message ID is extended, up to 64 messages are supported.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator