1 year warranty
Ask for quote
Specifications
Model |
MD-U2020 |
|||
Type |
2.5 W type Wide area type Head |
|||
Marking laser |
Output |
3 W/40 kHz (output at contact point: 2.5 W) |
||
Q-switch frequency |
CW (continuous oscillation), 40 to 400 kHz |
|||
Laser class |
Marking laser |
YVO4 laser wavelength: 355 nm class 4 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)*1 |
||
Distance measurement laser |
Semiconductor laser wavelength: 683 nm output: 5.0 mW class 3R laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)*1 |
|||
Guide laser |
Semiconductor laser wavelength: 655 nm output: 1.0 mW class 2 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)*1 |
|||
Marking area |
330 × 330 × 42 mm 12.99"×12.99"×1.65" |
|||
Standard working distance (±variation width) |
300 mm 11.81" (± 21 mm ± 0.83") |
|||
Marking method |
XYZ 3-axis simultaneous scanning method |
|||
Marking method |
XY scanner |
Digital galvo scanner |
||
Z scanner |
Linear motor |
|||
Optional models |
3D marking |
MD-AD-3D |
||
Built-in camera alignment |
MD-AD-XYT |
|||
Autofocus |
MD-AD-ZT |
|||
Built-in 2D code reader |
MD-AD-2DR/MD-AD-2DRA (corresponding standard ISO/IEC TR 29158 (AIM DPM-1-2006)) |
|||
Handheld console |
MC-P1 |
|||
Laser safety module |
MD-C2BU |
|||
PC software |
MB-PH1 (Marking Builder Plus/Marking Diagnostic Tool)*2 |
|||
Built-In Camera |
Image sensor |
CMOS image sensor (2.3 megapixels) |
||
No. equipped |
2 (full-view camera/coaxial camera) |
|||
Built-in light source |
High-intensity green LED |
|||
Built-in power meter |
Thermopile |
|||
Logging function |
Internal operation/terminal block/communication/error/operating information/built-in camera image |
|||
Character type |
Font |
Original Font/User Font/TrueType Font/OpenType Font*3 |
||
Barcode |
CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93/GS1 DataBar |
|||
2D code |
QR Code/Micro QR Code/DataMatrix (ECC200/GS1 DataMatrix/DMRE) |
|||
Logo image |
DXF/BMP/JPEG/PNG/TIFF |
|||
Appearance |
Plane, 3D shapes (slope, cylinder, cone, sphere, 3DCAD (STL))*4 |
|||
Work state |
Stationary/moving (constant velocity, encoder/rotary marking) |
|||
Input / Output |
Terminal block input and output/MIL connector input and output/Laser safety module control input and output*5 |
|||
Interface |
RS-232C/USB2.0/Ethernet (100BASE-TX)*6 |
|||
Marking unit cable length |
4.6 ± 0.1 m 15.1' ± 0.3' |
|||
Enclosure rating |
IP64 (head part) |
|||
Environmental resistance |
Ambient temperature for transport/storage |
-10 to 60°C 14 to 140°F (no freezing) |
||
Ambient temperature |
0 to 40°C 32 to 104°F |
|||
Ambient temperature for transport/storage |
Max. 85% RH (no condensation) |
|||
Relative humidity | ||||
Weight |
Controller: 9.7 kg 21.38 lb |
|||
Compatible regulations |
EU Directives (EMC Directive, Low Voltage Directive, RoHS Directive) / EN Standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN63000) / CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1, UL61010-1) / North American Standards (FCC Part 15B, ICES-001 Class A) / China RoHS/UKCA |
|||
*1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice | ||||
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Ask for quote
Trusted By
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator