Keyence

MD-U2000 Keyence

Specifications

Model		MD-U2000
Type		Controller
Marking laser	Output	MD-U2010,MD-U2020,MD-U2050: 3 W/40 kHz (output at contact point: 2.5 W) MD-U2510,MD-U2520,MD-U2530: 8.5 W/40 kHz (output at contact point: 7 W)
	Q-switch frequency	CW (continuous oscillation), 40 to 400 kHz
Laser class	Marking laser	YVO₄ laser wavelength: 355 nm class 4 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Distance measurement laser	Semiconductor laser wavelength: 683 nm output: 5.0 mW class 3R laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Guide laser	Semiconductor laser wavelength: 655 nm output: 1.0 mW class 2 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
Marking area		MD-U2010,MD-U2510: 125 × 125 × 42 mm 4.92"×4.92"×1.65" MD-U2020,MD-U2520: 330 × 330 × 42 mm 12.99"×12.99"×1.65" MD-U2050: 50 × 50 × 10 mm 1.97"×1.97"×0.39" MD-U2530: 660×660×100 mm 25.98”×25.98”×3.94”
Standard working distance (±variation width)		MD-U2010,MD-U2510: 189 mm 7.44" (± 21 mm ± 0.83") MD-U2020,MD-U2520: 300 mm 11.81" (± 21 mm ± 0.83") MD-U2050: 100 mm 3.94" (±5 mm ± 0.20") MD-U2530: 660 mm 25.98” (±50mm ±1.97”)
Marking method		XYZ 3-axis simultaneous scanning method
Marking method	XY scanner	Digital galvo scanner
	Z scanner	Linear motor
Optional models	3D marking	MD-AD-3D
	Built-in camera alignment	MD-AD-XYT
	Autofocus	MD-U2010,MD-U2020,MD-U2510,MD-U2520: MD-AD-ZT MD-U2050,MD-U2530: -
	Built-in 2D code reader	MD-AD-2DR/MD-AD-2DRA (corresponding standard ISO/IEC TR 29158 (AIM DPM-1-2006))
	Handheld console	MC-P1
	Laser safety module	MD-C2BU
	PC software	MB-PH1 (Marking Builder Plus/Marking Diagnostic Tool)^*2
Built-In Camera	Image sensor	CMOS image sensor (2.3 megapixels)
	No. equipped	MD-U2010,MD-U2020,MD-U2510,MD-U2520,MD-U2530: 2 (full-view camera/coaxial camera) MD-U2050: 1 (coaxial camera)
	Built-in light source	High-intensity green LED
Built-in power meter		Thermopile
Logging function		Internal operation/terminal block/communication/error/operating information/built-in camera image
Character type	Font	Original Font/User Font/TrueType Font/OpenType Font^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93/GS1 DataBar
	2D code	QR Code/Micro QR Code/DataMatrix (ECC200/GS1 DataMatrix/DMRE)
	Logo image	DXF/BMP/JPEG/PNG/TIFF
	Appearance	Plane, 3D shapes (slope, cylinder, cone, sphere, 3DCAD (STL))^*4
	Work state	Stationary/moving (constant velocity, encoder/rotary marking)
Input / Output		Terminal block input and output/MIL connector input and output/Laser safety module control input and output^*5
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX)^*6
Marking unit cable length		4.6 ± 0.1 m 15.1' ± 0.3'
Enclosure rating		IP2X (controller part)
Rated voltage and power consumption		Single phase 100 to 240 VAC ±10%, 50/60 Hz, Max. 650 VA (With MD-U2010/2020/2050 connection: Up to 600 VA/270 W average; with MD-U2510/2520/2530 connection: Up to 650 VA/370 W average)
Environmental resistance	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient temperature	0 to 40°C 32 to 104°F
	Ambient temperature for transport/storage	Max. 85% RH (no condensation)
	Relative humidity
Weight		Controller: 9.7 kg 21.38 lb Head: 21.7 kg 47.84 lb (MD-U2010,MD-U2020), 21.3 kg 46.96 lb (MD-U2050), 22.9 kg 50.49 lb (MD-U2510,MD-U2520), 22.5 kg 49.60 Ib (MD-U2530) Control cable: 2.5 kg 5.51 lb Console: 2.0 kg 4.41 lb
Compatible regulations		EU Directives (EMC Directive, Low Voltage Directive, RoHS Directive) / EN Standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN63000) / CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1, UL61010-1) / North American Standards (FCC Part 15B, ICES-001 Class A) / China RoHS/UKCA
^1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice ^2 Download from the KEYENCE website. Software supported languages: English, Japanese, Chinese (Simplified), Chinese (Traditional), German, Korean, French, Spanish, Thai, Italian ^3 Only TrueType fonts and OpenType fonts with “Installable” or “Editable” font attributes are supported. This attribute can be found in properties at Control Panel - Font. ^4 When using MD-AD-3D ^5 When a laser safety module (MD-C2BU) is installed ^6 The USB ports are USB memory, USB mouse port, barcode reader (A connector) and a dedicated Marking Builder Plus (ActiveX) port (B connector). Supported Ethernet ports include Marking Builder Plus (ActiveX), Operation Monitor, Communication with diagnostic tools and TCP/IP communication, PROFINET, EtherNet/IP^TM, EtherCAT®, and FTP client.

Specifications

Model		MD-U2000
Type		Controller
Marking laser	Output	MD-U2010,MD-U2020,MD-U2050: 3 W/40 kHz (output at contact point: 2.5 W) MD-U2510,MD-U2520,MD-U2530: 8.5 W/40 kHz (output at contact point: 7 W)
	Q-switch frequency	CW (continuous oscillation), 40 to 400 kHz
Laser class	Marking laser	YVO₄ laser wavelength: 355 nm class 4 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Distance measurement laser	Semiconductor laser wavelength: 683 nm output: 5.0 mW class 3R laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Guide laser	Semiconductor laser wavelength: 655 nm output: 1.0 mW class 2 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
Marking area		MD-U2010,MD-U2510: 125 × 125 × 42 mm 4.92"×4.92"×1.65" MD-U2020,MD-U2520: 330 × 330 × 42 mm 12.99"×12.99"×1.65" MD-U2050: 50 × 50 × 10 mm 1.97"×1.97"×0.39" MD-U2530: 660×660×100 mm 25.98”×25.98”×3.94”
Standard working distance (±variation width)		MD-U2010,MD-U2510: 189 mm 7.44" (± 21 mm ± 0.83") MD-U2020,MD-U2520: 300 mm 11.81" (± 21 mm ± 0.83") MD-U2050: 100 mm 3.94" (±5 mm ± 0.20") MD-U2530: 660 mm 25.98” (±50mm ±1.97”)
Marking method		XYZ 3-axis simultaneous scanning method
Marking method	XY scanner	Digital galvo scanner
	Z scanner	Linear motor
Optional models	3D marking	MD-AD-3D
	Built-in camera alignment	MD-AD-XYT
	Autofocus	MD-U2010,MD-U2020,MD-U2510,MD-U2520: MD-AD-ZT MD-U2050,MD-U2530: -
	Built-in 2D code reader	MD-AD-2DR/MD-AD-2DRA (corresponding standard ISO/IEC TR 29158 (AIM DPM-1-2006))
	Handheld console	MC-P1
	Laser safety module	MD-C2BU
	PC software	MB-PH1 (Marking Builder Plus/Marking Diagnostic Tool)^*2
Built-In Camera	Image sensor	CMOS image sensor (2.3 megapixels)
	No. equipped	MD-U2010,MD-U2020,MD-U2510,MD-U2520,MD-U2530: 2 (full-view camera/coaxial camera) MD-U2050: 1 (coaxial camera)
	Built-in light source	High-intensity green LED
Built-in power meter		Thermopile
Logging function		Internal operation/terminal block/communication/error/operating information/built-in camera image
Character type	Font	Original Font/User Font/TrueType Font/OpenType Font^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93/GS1 DataBar
	2D code	QR Code/Micro QR Code/DataMatrix (ECC200/GS1 DataMatrix/DMRE)
	Logo image	DXF/BMP/JPEG/PNG/TIFF
	Appearance	Plane, 3D shapes (slope, cylinder, cone, sphere, 3DCAD (STL))^*4
	Work state	Stationary/moving (constant velocity, encoder/rotary marking)
Input / Output		Terminal block input and output/MIL connector input and output/Laser safety module control input and output^*5
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX)^*6
Marking unit cable length		4.6 ± 0.1 m 15.1' ± 0.3'
Enclosure rating		IP2X (controller part)
Rated voltage and power consumption		Single phase 100 to 240 VAC ±10%, 50/60 Hz, Max. 650 VA (With MD-U2010/2020/2050 connection: Up to 600 VA/270 W average; with MD-U2510/2520/2530 connection: Up to 650 VA/370 W average)
Environmental resistance	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient temperature	0 to 40°C 32 to 104°F
	Ambient temperature for transport/storage	Max. 85% RH (no condensation)
	Relative humidity
Weight		Controller: 9.7 kg 21.38 lb Head: 21.7 kg 47.84 lb (MD-U2010,MD-U2020), 21.3 kg 46.96 lb (MD-U2050), 22.9 kg 50.49 lb (MD-U2510,MD-U2520), 22.5 kg 49.60 Ib (MD-U2530) Control cable: 2.5 kg 5.51 lb Console: 2.0 kg 4.41 lb
Compatible regulations		EU Directives (EMC Directive, Low Voltage Directive, RoHS Directive) / EN Standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN63000) / CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1, UL61010-1) / North American Standards (FCC Part 15B, ICES-001 Class A) / China RoHS/UKCA
^1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice ^2 Download from the KEYENCE website. Software supported languages: English, Japanese, Chinese (Simplified), Chinese (Traditional), German, Korean, French, Spanish, Thai, Italian ^3 Only TrueType fonts and OpenType fonts with “Installable” or “Editable” font attributes are supported. This attribute can be found in properties at Control Panel - Font. ^4 When using MD-AD-3D ^5 When a laser safety module (MD-C2BU) is installed ^6 The USB ports are USB memory, USB mouse port, barcode reader (A connector) and a dedicated Marking Builder Plus (ActiveX) port (B connector). Supported Ethernet ports include Marking Builder Plus (ActiveX), Operation Monitor, Communication with diagnostic tools and TCP/IP communication, PROFINET, EtherNet/IP^TM, EtherCAT®, and FTP client.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Price on request
Ask for quote

Specifications

Model		MD-U2000
Type		Controller
Marking laser	Output	MD-U2010,MD-U2020,MD-U2050: 3 W/40 kHz (output at contact point: 2.5 W) MD-U2510,MD-U2520,MD-U2530: 8.5 W/40 kHz (output at contact point: 7 W)
	Q-switch frequency	CW (continuous oscillation), 40 to 400 kHz
Laser class	Marking laser	YVO₄ laser wavelength: 355 nm class 4 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Distance measurement laser	Semiconductor laser wavelength: 683 nm output: 5.0 mW class 3R laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Guide laser	Semiconductor laser wavelength: 655 nm output: 1.0 mW class 2 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
Marking area		MD-U2010,MD-U2510: 125 × 125 × 42 mm 4.92"×4.92"×1.65" MD-U2020,MD-U2520: 330 × 330 × 42 mm 12.99"×12.99"×1.65" MD-U2050: 50 × 50 × 10 mm 1.97"×1.97"×0.39" MD-U2530: 660×660×100 mm 25.98”×25.98”×3.94”
Standard working distance (±variation width)		MD-U2010,MD-U2510: 189 mm 7.44" (± 21 mm ± 0.83") MD-U2020,MD-U2520: 300 mm 11.81" (± 21 mm ± 0.83") MD-U2050: 100 mm 3.94" (±5 mm ± 0.20") MD-U2530: 660 mm 25.98” (±50mm ±1.97”)
Marking method		XYZ 3-axis simultaneous scanning method
Marking method	XY scanner	Digital galvo scanner
	Z scanner	Linear motor
Optional models	3D marking	MD-AD-3D
	Built-in camera alignment	MD-AD-XYT
	Autofocus	MD-U2010,MD-U2020,MD-U2510,MD-U2520: MD-AD-ZT MD-U2050,MD-U2530: -
	Built-in 2D code reader	MD-AD-2DR/MD-AD-2DRA (corresponding standard ISO/IEC TR 29158 (AIM DPM-1-2006))
	Handheld console	MC-P1
	Laser safety module	MD-C2BU
	PC software	MB-PH1 (Marking Builder Plus/Marking Diagnostic Tool)^*2
Built-In Camera	Image sensor	CMOS image sensor (2.3 megapixels)
	No. equipped	MD-U2010,MD-U2020,MD-U2510,MD-U2520,MD-U2530: 2 (full-view camera/coaxial camera) MD-U2050: 1 (coaxial camera)
	Built-in light source	High-intensity green LED
Built-in power meter		Thermopile
Logging function		Internal operation/terminal block/communication/error/operating information/built-in camera image
Character type	Font	Original Font/User Font/TrueType Font/OpenType Font^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93/GS1 DataBar
	2D code	QR Code/Micro QR Code/DataMatrix (ECC200/GS1 DataMatrix/DMRE)
	Logo image	DXF/BMP/JPEG/PNG/TIFF
	Appearance	Plane, 3D shapes (slope, cylinder, cone, sphere, 3DCAD (STL))^*4
	Work state	Stationary/moving (constant velocity, encoder/rotary marking)
Input / Output		Terminal block input and output/MIL connector input and output/Laser safety module control input and output^*5
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX)^*6
Marking unit cable length		4.6 ± 0.1 m 15.1' ± 0.3'
Enclosure rating		IP2X (controller part)
Rated voltage and power consumption		Single phase 100 to 240 VAC ±10%, 50/60 Hz, Max. 650 VA (With MD-U2010/2020/2050 connection: Up to 600 VA/270 W average; with MD-U2510/2520/2530 connection: Up to 650 VA/370 W average)
Environmental resistance	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient temperature	0 to 40°C 32 to 104°F
	Ambient temperature for transport/storage	Max. 85% RH (no condensation)
	Relative humidity
Weight		Controller: 9.7 kg 21.38 lb Head: 21.7 kg 47.84 lb (MD-U2010,MD-U2020), 21.3 kg 46.96 lb (MD-U2050), 22.9 kg 50.49 lb (MD-U2510,MD-U2520), 22.5 kg 49.60 Ib (MD-U2530) Control cable: 2.5 kg 5.51 lb Console: 2.0 kg 4.41 lb
Compatible regulations		EU Directives (EMC Directive, Low Voltage Directive, RoHS Directive) / EN Standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN63000) / CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1, UL61010-1) / North American Standards (FCC Part 15B, ICES-001 Class A) / China RoHS/UKCA
^1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice ^2 Download from the KEYENCE website. Software supported languages: English, Japanese, Chinese (Simplified), Chinese (Traditional), German, Korean, French, Spanish, Thai, Italian ^3 Only TrueType fonts and OpenType fonts with “Installable” or “Editable” font attributes are supported. This attribute can be found in properties at Control Panel - Font. ^4 When using MD-AD-3D ^5 When a laser safety module (MD-C2BU) is installed ^6 The USB ports are USB memory, USB mouse port, barcode reader (A connector) and a dedicated Marking Builder Plus (ActiveX) port (B connector). Supported Ethernet ports include Marking Builder Plus (ActiveX), Operation Monitor, Communication with diagnostic tools and TCP/IP communication, PROFINET, EtherNet/IP^TM, EtherCAT®, and FTP client.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator

MD-U2000 Keyence

Specifications

Specifications

Specifications

MD-U2000 Keyence

Specifications

Specifications

Trusted By

You may also like

Recently viewed