IB-1000 Keyence

Specifications

Model		IB-1000
Type		DIN rail mount
Main unit/Expansion unit		Main unit
Head compatibility		Yes
Display	Display resolution	0.01 %, 0.1 %, 1 % (switchable)
	Display range	–99.999 to 99.999, –99.99 to 99.99 –99.9 to 99.9, –99 to 99 (switchable)
	Digital display method	Dual7-segmentdisplay Upper level: 5 red digits Lower level: 5 green digits
	Operating indicators	Judgment indicator: 2-color (green/red) LED (HI, GO, LO) Bank indicator: Green LED x 4 Laser emission warning indicator: Green LED Others: Green LED x 8, red LED x 3
Analog output voltage		±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω ^*1
Analog current output		4 to 20 mA Maximum load resistance 350 Ω ^*1
Control Input	Bank switch input, zero shift input	Non-voltage input ^*2
Control input	Zero shift input
	Laser emission stop input
	Timing input
	Reset input
	Adjust input
Control output	Judgment output (check output)	Open collector (NPN/PNP switchable, N.O./N.C. switchable) ^*3
Power supply	Power consumption	2400 mW or less (at 30 V, 80 mA max.) ^4 ^5 (including analog current output)
	Power voltage	10 to 30 VDC, including ripple (P-P) 10% Class 2 or LPS ^*4
Environmental resistance	Pollution degree	2
	Ambient temperature	-10 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, compound amplitude 1.5 mm, 2 hours each for X, Y, Z axes
Material		Main unit case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC
Weight		Approx. 150 g (including accessories)
^1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected. ^2 The four external input wires are assigned with desired inputs. Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less ^3 Rated NPN open collector output: Max. 100 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), power voltage or less, residual voltage 2 V or less ^4 Use with the over current protection device which is rated 30 V or more and not more than 1 A. ^*5 Does not include the power consumption of the load. The power consumption with expansion units installed is the total of each amplifier unit’s power consumption. Example: When using one main unit (IB-1000) with two expansion units (IB-1050) (2400 mW X 1) + (2400 mW X 2) = 7200 mW

Est. delivery between and

€534,95

1-year warranty

FREE WORDWIDE SHIPPING

Condition:

Sealed Surplus

SKU: IB-1000-Sealed

Sold out

€0,00

Never Used Surplus

SKU: IB-1000

5 verified stock

€534,95

Used

SKU: IB-1000-Used

4 verified stock

€409,95

Variant

Quantity:

Need More?

Specifications

Model		IB-1000
Type		DIN rail mount
Main unit/Expansion unit		Main unit
Head compatibility		Yes
Display	Display resolution	0.01 %, 0.1 %, 1 % (switchable)
	Display range	–99.999 to 99.999, –99.99 to 99.99 –99.9 to 99.9, –99 to 99 (switchable)
	Digital display method	Dual7-segmentdisplay Upper level: 5 red digits Lower level: 5 green digits
	Operating indicators	Judgment indicator: 2-color (green/red) LED (HI, GO, LO) Bank indicator: Green LED x 4 Laser emission warning indicator: Green LED Others: Green LED x 8, red LED x 3
Analog output voltage		±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω ^*1
Analog current output		4 to 20 mA Maximum load resistance 350 Ω ^*1
Control Input	Bank switch input, zero shift input	Non-voltage input ^*2
Control input	Zero shift input
	Laser emission stop input
	Timing input
	Reset input
	Adjust input
Control output	Judgment output (check output)	Open collector (NPN/PNP switchable, N.O./N.C. switchable) ^*3
Power supply	Power consumption	2400 mW or less (at 30 V, 80 mA max.) ^4 ^5 (including analog current output)
	Power voltage	10 to 30 VDC, including ripple (P-P) 10% Class 2 or LPS ^*4
Environmental resistance	Pollution degree	2
	Ambient temperature	-10 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, compound amplitude 1.5 mm, 2 hours each for X, Y, Z axes
Material		Main unit case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC
Weight		Approx. 150 g (including accessories)
^1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected. ^2 The four external input wires are assigned with desired inputs. Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less ^3 Rated NPN open collector output: Max. 100 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), power voltage or less, residual voltage 2 V or less ^4 Use with the over current protection device which is rated 30 V or more and not more than 1 A. ^*5 Does not include the power consumption of the load. The power consumption with expansion units installed is the total of each amplifier unit’s power consumption. Example: When using one main unit (IB-1000) with two expansion units (IB-1050) (2400 mW X 1) + (2400 mW X 2) = 7200 mW

Model		IB-1000
Type		DIN rail mount
Main unit/Expansion unit		Main unit
Head compatibility		Yes
Display	Display resolution	0.01 %, 0.1 %, 1 % (switchable)
	Display range	–99.999 to 99.999, –99.99 to 99.99 –99.9 to 99.9, –99 to 99 (switchable)
	Digital display method	Dual7-segmentdisplay Upper level: 5 red digits Lower level: 5 green digits
	Operating indicators	Judgment indicator: 2-color (green/red) LED (HI, GO, LO) Bank indicator: Green LED x 4 Laser emission warning indicator: Green LED Others: Green LED x 8, red LED x 3
Analog output voltage		±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω ^*1
Analog current output		4 to 20 mA Maximum load resistance 350 Ω ^*1
Control Input	Bank switch input, zero shift input	Non-voltage input ^*2
Control input	Zero shift input
	Laser emission stop input
	Timing input
	Reset input
	Adjust input
Control output	Judgment output (check output)	Open collector (NPN/PNP switchable, N.O./N.C. switchable) ^*3
Power supply	Power consumption	2400 mW or less (at 30 V, 80 mA max.) ^4 ^5 (including analog current output)
	Power voltage	10 to 30 VDC, including ripple (P-P) 10% Class 2 or LPS ^*4
Environmental resistance	Pollution degree	2
	Ambient temperature	-10 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, compound amplitude 1.5 mm, 2 hours each for X, Y, Z axes
Material		Main unit case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC
Weight		Approx. 150 g (including accessories)
^1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected. ^2 The four external input wires are assigned with desired inputs. Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less ^3 Rated NPN open collector output: Max. 100 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), power voltage or less, residual voltage 2 V or less ^4 Use with the over current protection device which is rated 30 V or more and not more than 1 A. ^*5 Does not include the power consumption of the load. The power consumption with expansion units installed is the total of each amplifier unit’s power consumption. Example: When using one main unit (IB-1000) with two expansion units (IB-1050) (2400 mW X 1) + (2400 mW X 2) = 7200 mW

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator