1 year warranty
Ask for quote
Model |
BZ-X1100 |
|||
Microscope unit |
Observation modes |
Brightfield, Fluorescence (max. 11 ch.; wide-field/sectioning), Phase contrast (PhL, Ph1, Ph2), Oblique illumination |
||
Objective lens switching |
Six-mount motorized revolver |
|||
Motorized XY stage |
114 × 80 mm 4.49" × 3.15" stroke, minimum 1 µm pitch |
|||
Motorized Z stage |
8 mm 0.31" stroke, minimum 0.1 µm pitch |
|||
Motorized filter turret |
Installation of up to 6 filters, Automatic position recognition |
|||
Motorized filter wheel | ||||
Fluorescent incident illumination |
Optical sectioning system |
|||
Fluorescence dimming mechanism |
Electronic dimming (10%, 20%, 40%, 100%) |
|||
Transmitted illumination optical system |
Working distance: 45 mm 1.77", LED lighting |
|||
Transmitted illumination mechanism |
Electronic brightfield aperture (0%, 20%, 40%, 60%, 80%, 100%), Phase contrast slit (PhL, Ph1, Ph2) |
|||
Transmitted light source |
24 W LED |
|||
Fluorescent incident light source |
48 W LED |
|||
Specimen enclosure |
Stage fully contained in a built-in darkroom |
|||
Camera unit |
Image receiving element |
2/3 inch, 10 megapixel monochrome CMOS (with color switching) |
||
Output signal, gradations |
14-bit (high-quality interpolation)/12-bit/8-bit monochrome, 8-bit R/G/B |
|||
Frame rate |
19 fps for monochrome recording (up to 100 fps), 9.2 fps for color recording |
|||
Binning |
2×2, 3×3, 4×4, 6×6, 8×8 |
|||
Number of pixels in recorded image |
7328 × 5496 max. (40-megapixel, high-quality interpolation) |
|||
Video capturing |
9.2 to 100 fps |
|||
Electronic shutter |
Auto, 60 microseconds to 60 seconds |
|||
Gain |
0 to 24 dB |
|||
White balance |
Push-set, manual |
|||
Black balance | ||||
Observation software |
Multi-color image capturing, Auto focus, Quick full-focus, Navigation, Scale display for capture condition reproduction, Motorized revolver and stage control, Low photobleach |
|||
Controller |
Supported OS |
Windows®11 Pro, 64-bit |
||
PC interface |
USB 3.0 |
|||
Dimensions |
Head: 515.1 (H) × 346.2 (W) × 508 (D) mm 20.28" (H) × 13.63" (W) × 20.00" (D)*1; |
|||
Weight |
Head: Approx. 29 kg 63.93 lb, Controller: Approx. 4.7 kg 10.36 lb |
|||
Power voltage |
100 to 240 VAC ±10%, 50/60 Hz |
|||
Power consumption |
200 VA or less |
|||
Overvoltage category |
II |
|||
Pollution degree |
2 |
|||
Optional modules |
BZ-H5XF/Sectioning Module |
Optical sectioning imaging |
||
BZ-H5XJ/Stitching and Multi-Point Imaging Module |
Image stitching, Multi-point & multi-condition capturing |
|||
BZ-H5XZ/Z-Stacking Module |
Z-stack capturing |
|||
BZ-H5XI/Image Cytometer Module |
Batch capture (user location specified/all locations specified/random location specified) *BZ-H5XZ and BZ-H5XJ required / Image cytometer, batch analysis *BZ-H5C required |
|||
BZ-H5XT/Time-lapse Module |
Time-lapse imaging, Video capturing, Time-series brightness measurement |
|||
Analysis options |
BZ-H5A/Analysis Application |
Image stitching, Haze reduction, Full focus, File finder |
||
BZ-H5M/Measurement Application |
Dimension measurement, Area measurement, Brightness measurement (line profile, histogram) |
|||
BZ-H5R/3D Analysis Application |
3D display, 3D measurement, XYZ slicing, Maximum projection, Video saving, 3D cell count (with addition of BZ-H5C) |
|||
BZ-H5K/Motion Analysis Application |
Motion tracking, Motion analysis, Time-series cell count (with addition of BZ-H5C) |
|||
BZ-H5C/Hybrid Cell Count |
Cell count (Phase contrast, Brightfield, Fluorescence), Mask cell count |
|||
BZ-H5CM/Macro Cell Count |
Macro cell counting (Batch analysis of multiple images) |
|||
*1 Panel closed | ||||
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Ask for quote
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator