TSX Micro�Relay discrete output module - 8 output relay
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Modicon TSX Micro automation platform |
| Product or component type | Discrete output module |
| Discrete output number | 8 screw terminal block |
| Discrete output voltage | 24 V DC |
| Discrete output current | 0.5 mA |
| Discrete output logic | Positive |
Complementary
| Characteristic | Value(s) |
|---|---|
| Output voltage limits | 19...30 V |
| Output current limits | 0.625 A |
| Maximum leakage current | 0.5 mA at state 0 |
| [Ures] residual voltage | 0.3 V |
| Load impedance ohmic | 48 Ohm |
| Response time | < 0.5 ms at state 1 < 0.5 ms at state 0 |
| Switching frequency | < 0.6/LI² Hz |
| Output overvoltage protection | By zener diode |
| Output short-circuit protection | Thermal circuit breaker Current limiter |
| Reverse polarity protection | Reverse diode on power supply |
| Paralleling of outputs | Yes : 2 maximum |
| Current consumption | 38 mA |
| Power dissipation in W | 3.5 W by module 0.15 W by channel |
| Isolation voltage | 1500 V for 1 s |
| Product weight | 0.24 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Modicon TSX Micro automation platform |
| Product or component type | Discrete output module |
| Discrete output number | 8 1 HE-10 connector |
| Discrete output voltage | 24 V DC |
| Discrete output current | 0.5 mA |
| Discrete output logic | Positive |
Complementary
| Characteristic | Value(s) |
|---|---|
| Output voltage limits | 19...30 V |
| Output current limits | 0.625 A |
| Maximum leakage current | 0.5 mA at state 0 |
| [Ures] residual voltage | 0.3 V |
| Load impedance ohmic | 48 Ohm |
| Response time | < 0.5 ms at state 1 < 0.5 ms at state 0 |
| Switching frequency | < 0.6/LI² Hz |
| Output overvoltage protection | By zener diode |
| Output short-circuit protection | Thermal circuit breaker Current limiter |
| Reverse polarity protection | Reverse diode on power supply |
| Paralleling of outputs | Yes : 2 maximum |
| Current consumption | 38 mA |
| Power dissipation in W | 3.5 W by module 0.15 W by channel |
| Isolation voltage | 1500 V for 1 s |
| Product weight | 0.18 kg |
TSX Micro Relay discrete output module - 32 output relay
TSX Micro�Discrete output module - 32 discret output DC
PC FIP MODULE,�SCHNEIDER ELECTRIC TSX-FPC-10 / TSXFPC10
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | ISP Plus weighing module |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number of measurement input | 1 |
| Resolution | 1048576 points |
| Analogue input resolution | 20 bits |
| Measuring rate | 50 measurements per second |
| Input impedance | > 1 MOhm |
| Input compatibility | Load cell 1â¦8 350 Ohm yes <984.3 ft (300 m) |
| Sensor power supply | 10 V DC |
| Output compatibility | Discrete reflex 2 positive |
| Discrete output voltage | 24 V DC |
| Discrete output current | 500 mA |
| Response time on output | 1 ms |
| Transmission rate | 9.6 kbit/s RS485 non isolated <= 30 m discrete reflex weight indicator |
| Voltage division | 1 µV |
| Electrical connection | 1 connector screw terminal block for connecting 2 discrete reflex 1 female connector SUB-D 15 for the indicator input 1 female connector SUB-D 9 for RS485 serial link to the weight indicator |
| Marking | CE |
| Current consumption | 145 mA 24 V rack 150 mA 5 V DC |
| Module format | Standard |
| Product Weight | 0.93 lb(US) (0.42 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | ISP Plus weighing module |
Complementary
| Characteristic | Value(s) |
|---|---|
| Kit composition | TSXISPY101 module TSXXBTN410 weight indicator Magelis |
| Number of measurement input | 1 |
| Resolution | 1048576 points |
| Analogue input resolution | 20 bits |
| Measuring rate | 50 measurements per second |
| Input impedance | > 1 MOhm |
| Input compatibility | Load cell 1â¦8 350 Ohm yes <984.3 ft (300 m) |
| Sensor power supply | 10 V DC |
| Output compatibility | Discrete reflex 2 positive |
| Discrete output voltage | 24 V DC |
| Discrete output current | 500 mA |
| Response time on output | 1 ms |
| Transmission rate | 9.6 kbit/s RS485 non isolated <= 30 m discrete reflex weight indicator |
| Voltage division | 1 µV |
| Maximum cable distance between devices | 9.8 ft (3 m) for module/weight indicator |
| Electrical connection | 1 connector screw terminal block for connecting 2 discrete reflex 1 female connector SUB-D 15 for the indicator input 1 female connector SUB-D 9 for RS485 serial link to the weight indicator |
| Marking | CE |
| Current consumption | 145 mA 24 V rack 150 mA 5 V DC |
| Module format | Standard |
| Product Weight | 2.25 lb(US) (1.02 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | Preventa safety module |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Activation threshold | < 20 V |
| Short-circuit protection | 1 A gG external IEC 947-5-1 for F1 on power supply 4 A gG external IEC 947-5-1 for F2 on safety relay outputs |
| Isolation voltage | 4000 V III 2 |
| Discrete input number | 1 double or single contact selection input IEC 1131 Type 1 1 feedback loop input IEC 1131 Type 1 1 reset PB input IEC 1131 Type 1 1 reset PB monitoring input IEC 1131 Type 1 12 emergency stop or limit switch discrete inputs IEC 1131 Type 1 |
| Discrete input logic | Positive |
| Inrush current | 0.5 A |
| Isolation between input and earth | 500 Vrms 50/60 Hz 60 s |
| Maximum power dissipation in W | 5 W |
| Safety outputs | 4 NO safety relay AGCDO gold plated volt free output |
| [Ue] rated operational voltage | 17...127 V DC relay output 19...250 V AC relay output |
| Rated power in VA | 120 VA 48 V AC-15 inductive 280 VA 110 V AC-15 inductive 550 VA 220 V AC-15 inductive 60 VA 24 V AC-15 inductive |
| Rated power in W | 60 W 24 V DC-13 inductive 100 ms |
| [Ithe] conventional enclosed thermal current | 2.5 A |
| Minimum output current | 30 mA |
| Response time on output | < 12 ms |
| Isolation between output and earth | 300 V DIN VDE 0110 part 2 1500 Vrms 50/60 Hz 60 s |
| Safety acquisition | Read feedback loop Read enable inputs Read the safety outputs control Read status of the 24 inputs Monitor external power supply of the module |
| Local signalling | for diagnostic of safety system 28 LEDs |
| Electrical connection | 1 connector removable screw terminal block 6 pins 1 connector SUB-D 44 pins for connecting the safety system |
| Cable cross section | 0.0003â¦0.004 in² (0.2â¦2.5 mm²) without cable end safety output circuit 0.002 in² (1.5 mm²) with cable end safety output circuit |
| Current consumption | < 150 mA 5 V DC <= 200 mA 24 V DC |
| Module format | Standard |
| Product Weight | 1.08 lb(US) (0.49 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | Communication module |
| Software Designation | Unity Pro |
| Structure type | Heterogeneous industrial bus |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product Compatibility | Premium Atrium |
| Method of access | Master/slave type |
| Integrated connection type | 1 serial link 1 SUB-D 25 |
| Communication Port Protocol | Modbus |
| Communication port support | RS485 isolated |
| Mode of Transmission | Asynchronous in baseband |
| Transmission frame | Uni-Telway Character mode RTU/ASCII |
| Transmission Rate | 1.2...19.2 kbit/s |
| Transmission support medium | 2 twisted shielded pairs cable |
| Number of devices | 32 |
| Number of addresses | 0â¦247 |
| Bus length | 0.0000000000â¦4265.09 ft (0â¦1300 m) character mode 0.0000000000â¦4265.09 ft (0â¦1300 m) Modbus 0.0000000000â¦4265.09 ft (0â¦1300 m) Uni-Telway |
| Maximum tap links length | 49.2 ft (15 m) |
| Requests | 1920 bits per request 120 words per request |
| Control parameter | One CRC 16 on each frame |
| Monitoring function | Event counters Diagnostic counters |
| Modbus funtions available | Event connection Modbus master 0C Event connection Modbus slave 0C Event counter Modbus master 0B Event counter Modbus slave 0B Identification Modbus slave 11 Slave identification Modbus master 11 Write n output bits Modbus slave 0F Write n output words Modbus slave 10 Diagnostic Modbus master 08 Diagnostic Modbus slave 08 Exceptional read status Modbus master 07 Exceptional read status Modbus slave 07 Read bits Modbus master 01 Read input bits Modbus master 02 Read input bits Modbus slave 02 Read input words Modbus master 04 Read n input words Modbus slave 04 Read n output bits Modbus slave 01 Read n output words Modbus slave 03 Read words Modbus master 03 Write 1 bits or n bits Modbus master 05 Write 1 input word Modbus slave 06 Write 1 output bit Modbus slave 05 Write 1 word or n word Modbus master 06 |
| Local signalling | 1 LED for communication (CH0) 1 LED for internal fault, module failure (ERR) 1 LED for module operating (RUN) |
| Current consumption | 350 mA 5 V DC |
| Module format | Standard |
| Product Weight | 0.75 lb(US) (0.34 kg) |
Schneider
TWD-DDI8DT Schneider Electric - Discrete input module Twido TWDDD18DT
Sale price€0,00
Sold OutDiscrete input module Twido - 8 inputs - 24 V DC
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Analogue input module |
| Analogue input number | 4 |
| Analogue input type | Voltage 0...10 V non differential Current 4...20 mA non differential Temperature probe -100...+600 °C temperature probe: Ni 100 differential Temperature probe -100...+600 °C temperature probe: Ni 1000 differential Temperature probe -100...+600 °C temperature probe: Pt 100 differential Temperature probe -100...+600 °C temperature probe: Pt 1000 differential |
| Analogue input resolution | 12 bits |
| I/O connection | Removable screw terminal block |
| Cross talk | <= 1 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| LSB value | 0.15 °K, analogue input type: temperature probe 2.5 mV, analogue input type: voltage 4.8 µA, analogue input type: current |
| Permissible continuous overload | 13 V, analogue input type: voltage 40 mA, analogue input type: current |
| Input impedance | >= 10000 Ohm temperature probe 1000000 Ohm voltage 470 Ohm current |
| Sampling duration | 160 ms |
| Sampling repetition time | 4 ms |
| Acquisition period | 160 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.5 % of full scale 0...10 V at 25 °C +/- 0.5 % of full scale 4...20 mA at 25 °C +/- 0.5 % of full scale Ni 100 at 25 °C +/- 0.5 % of full scale Ni 1000 at 25 °C +/- 0.5 % of full scale Pt 100 at 25 °C +/- 0.5 % of full scale Pt 1000 at 25 °C |
| Temperature coefficient | +/-0.005 %FS/°C, analogue input type: current +/-0.005 %FS/°C, analogue input type: temperature probe +/-0.005 %FS/°C, analogue input type: voltage |
| Repeat accuracy | 2 LSB %FS |
| Non-linearity | +/- 0.02 %FS, analogue input type: current +/- 0.02 %FS, analogue input type: temperature probe +/- 0.02 %FS, analogue input type: voltage |
| Total error | +/-0.5 %FS, analogue input type: current +/-0.5 %FS, analogue input type: temperature probe +/-0.5 %FS, analogue input type: voltage |
| Common mode rejection | - 90 dB |
| Type of cable | Shielded twisted pair |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Current consumption | 50 mA at 5 V DC 60 mA at 24 V DC |
| Marking | CE |
| Product weight | 0.085 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Analogue input module |
| Analogue input number | 8 |
| Analogue input type | Voltage 0...10 V non differential Current 0...20 mA non differential |
| Analogue input resolution | 10 bits |
| I/O connection | Removable screw terminal block |
| Cross talk | <= 1 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| LSB value | 19.5 µA, analogue input type: current 9.7 mV, analogue input type: voltage |
| Permissible continuous overload | 13 V, analogue input type: voltage 40 mA, analogue input type: current |
| Input impedance | >= 10000 Ohm voltage 470 Ohm current |
| Sampling duration | 160 ms |
| Sampling repetition time | 8 ms |
| Acquisition period | 1280 ms + 1 controller cycle time |
| Measurement error | +/- 1 % of full scale 0...10 V at 25 °C +/- 1 % of full scale 0...20 mA at 25 °C |
| Temperature coefficient | +/-0.005 %FS/°C, analogue input type: current +/-0.005 %FS/°C, analogue input type: voltage |
| Repeat accuracy | 2 LSB %FS |
| Non-linearity | +/- 0.002 %FS, analogue input type: current +/- 0.002 %FS, analogue input type: voltage |
| Total error | +/-1 %FS, analogue input type: current +/-1 %FS, analogue input type: voltage |
| Common mode rejection | - 90 dB |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Current consumption | 50 mA at 24 V DC 50 mA at 5 V DC |
| Marking | CE |
| Product weight | 0.085 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Analogue I/O module |
| Analogue input number | 2 |
| Analogue input type | Current 4...20 mA differential Voltage 0...10 V non differential |
| Analogue input resolution | 12 bits |
| Analogue output number | 1 |
| Analogue output type | Current: 4...20 mA Voltage: 0...10 V |
| Analogue output resolution | 12 bits |
| I/O connection | Removable screw terminal block |
| Cross talk | <= 2 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input level | High level |
| LSB value | 2.5 mV voltage 4.8 µA current 2.5 mV, analogue input type: voltage 4.8 µA, analogue input type: current |
| Permissible continuous overload | 13 V, analogue input type: voltage 40 mA, analogue input type: current |
| Input impedance | >= 10 Ohm current >= 1000000 Ohm voltage |
| Load type | Resistive |
| Load impedance ohmic | <= 300 Ohm current >= 2000 Ohm voltage |
| Stabilisation time | 20 ms |
| Conversion time | 20 ms + 1 controller cycle time |
| Sampling duration | 16 ms |
| Sampling repetition time | 16 ms |
| Acquisition period | 16 ms + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 0...10 V 0...10 V at 25 °C +/- 0.2 % of full scale 4...20 mA 4...20 mA at 25 °C |
| Temperature coefficient | +/-0.015 %FS/°C, analogue output type: current +/-0.015 %FS/°C, analogue output type: voltage +/-0.006 %FS/°C, analogue input type: current +/-0.006 %FS/°C, analogue input type: voltage |
| Repeat accuracy | +/-0.5 %FS |
| Non-linearity | +/- 0.2 %FS, analogue output type: current +/- 0.2 %FS, analogue output type: voltage +/- 0.2 %FS, analogue input type: current +/- 0.2 %FS, analogue input type: voltage |
| Output error | +/- 1 %FS |
| Output ripple | <= 1 LSB |
| Total error | +/-1 %FS, analogue output type: current +/-1 %FS, analogue output type: voltage +/-1 %FS, analogue input type: current +/-1 %FS, analogue input type: voltage |
| Common mode rejection | - 50 dB |
| Type of cable | Shielded twisted pair |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Current consumption | 50 mA at 5 V DC 60 mA at 24 V DC |
| Marking | CE |
| Product weight | 0.085 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Analogue output module |
| Analogue output number | 1 |
| Analogue output type | Current: 4...20 mA Voltage: 0...10 V |
| Analogue output resolution | 12 bits |
| I/O connection | Removable screw terminal block |
Complementary
| Characteristic | Value(s) |
|---|---|
| LSB value | 2.5 mV voltage 4 µA current |
| Load type | Resistive |
| Load impedance ohmic | <= 300 Ohm current >= 2000 Ohm voltage |
| Stabilisation time | 20 ms |
| Conversion time | 20 ms + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 0...10 V 0...10 V at 25 °C +/- 0.2 % of full scale 4...20 mA 4...20 mA at 25 °C |
| Temperature coefficient | +/-0.015 %FS/°C, analogue output type: current +/-0.015 %FS/°C, analogue output type: voltage |
| Repeat accuracy | +/-0.5 %FS |
| Non-linearity | +/- 0.2 %FS, analogue output type: current +/- 0.2 %FS, analogue output type: voltage |
| Output error | +/- 1 %FS |
| Output ripple | <= 1 LSB |
| Total error | +/-1 %FS, analogue output type: current +/-1 %FS, analogue output type: voltage |
| Type of cable | Shielded twisted pair |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Current consumption | 40 mA at 24 V DC 50 mA at 5 V DC |
| Marking | CE |
| Product weight | 0.085 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Analogue input module |
| Analogue input number | 8 |
| Analogue input type | Temperature probe 100...10000 Ohm temperature probe: PTC/NTC differential |
| Analogue input resolution | 10 bits |
| I/O connection | Removable screw terminal block |
| Cross talk | <= 1 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input impedance | >= 1000000 Ohm voltage |
| Sampling duration | 160 ms |
| Sampling repetition time | 8 ms |
| Acquisition period | 1280 ms + 1 controller cycle time |
| Measurement error | +/- 1 % of full scale PTC/NTC at 25 °C |
| Temperature coefficient | +/-0.005 %FS/°C, analogue input type: temperature probe |
| Repeat accuracy | 2 LSB %FS |
| Non-linearity | +/- 0.002 %FS, analogue input type: temperature probe |
| Total error | +/-1 %FS, analogue input type: temperature probe |
| Common mode rejection | - 90 dB |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Current consumption | 50 mA at 24 V DC 50 mA at 5 V DC |
| Marking | CE |
| Product weight | 0.085 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Discrete input module |
| Discrete input number | 16 |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| I/O connection | HE-10 connector |
| Number of common point | 1 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink or source |
| Discrete input current | 5 mA |
| Input impedance | 4.4 kOhm |
| Filter time | 8 ms at state 0 8 ms at state 1 |
| Insulation between channel and internal logic | 1500 Vrms for 1 min (by photocoupler) |
| Current consumption | 35 mA at 5 V DC at state 1 for all inputs 5 mA at 5 V DC at state 0 for all inputs |
| Marking | CE |
| Product weight | 0.065 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Discrete output module |
| Discrete output number | 16 |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V |
| Discrete output logic | Sink |
| I/O connection | HE-10 connector |
| Number of common point | 2 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Output voltage limits | 20.4...28.8 V |
| Discrete output current | 0.1 A |
| Current per channel | 0.12 A |
| Maximum current per output common | 2 A |
| Response time | 300 µs at state 0 300 µs at state 1 |
| [Ures] residual voltage | 1 V at state 1 |
| Maximum tungsten load | 8 W |
| Insulation between channel and internal logic | 1500 Vrms for 1 min (by photocoupler) |
| Current consumption | 10 mA at 5 V DC at state 1 for all outputs 40 mA at 24 V DC at state 1 for all outputs 5 mA at 5 V DC at state 0 for all outputs |
| Marking | CE |
| Product weight | 0.07 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Discrete output module |
| Discrete output number | 32 |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V |
| Discrete output logic | Source |
| I/O connection | HE-10 connector |
| Number of common point | 4 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Output voltage limits | 20.4...28.8 V |
| Discrete output current | 500 mA |
| Current per channel | 0.5 A |
| Maximum current per output common | 2 A |
| Response time | 300 µs at state 1 450 µs at state 0 |
| [Ures] residual voltage | 0.2 V at state 1 |
| Maximum inductive load | 2000 mH |
| Protection type | Short-circuit protection Overload protection |
| Maximum tungsten load | 16 W |
| Insulation between channel and internal logic | 1500 Vrms for 1 min (by photocoupler) |
| Current consumption | 10 mA at 5 V DC at state 0 for all outputs 20 mA at 5 V DC at state 1 for all outputs 70 mA at 24 V DC at state 1 for all outputs |
| Marking | CE |
| Product weight | 0.105 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Discrete I/O module |
| Discrete input number | 16 |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Discrete output number | 8 |
| Discrete output type | Relay |
| I/O connection | Spring terminal block |
| Number of common point | 1I/2O |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink or source |
| Discrete input current | 7 mA |
| Input impedance | 3.4 kOhm |
| Filter time | 8 ms at state 0 8 ms at state 1 |
| Discrete output function | 8 NO |
| Current per channel | 2 A |
| Maximum current per output common | 7 A |
| Contact resistance | 40000 µOhm |
| Response time | <= 7 ms |
| Insulation between channel and internal logic | 1500 Vrms for 1 min (by photocoupler) |
| Current consumption | 10 mA at 5 V DC at state 0 for all inputs/outputs 45 mA at 24 V DC at state 1 for all inputs/outputs 65 mA at 5 V DC at state 1 for all inputs/outputs |
| Marking | CE |
| Terminals description PLC n°1 | (3)IN_DIS#3 TB_1 ALT (15)IN_DIS#15 (8)IN_DIS#8 (6)IN_DIS#6 (2)IN_DIS#2 (10)IN_DIS#10 (12)IN_DIS#12 (4)IN_DIS#4 (11)IN_DIS#11 (14)IN_DIS#14 (13)IN_DIS#13 (1)IN_DIS#1 (0)IN_DIS#0 (5)IN_DIS#5 (7)IN_DIS#7 (9)IN_DIS#9 COM0_POS |
| Terminals description PLC n°2 | (0)IN_DIS#0 (12)IN_DIS#12 (11)IN_DIS#11 (7)IN_DIS#7 (6)IN_DIS#6 TB_1 (3)IN_DIS#3 (10)IN_DIS#10 (14)IN_DIS#14 (8)IN_DIS#8 (15)IN_DIS#15 (1)IN_DIS#1 COM0_NEG (9)IN_DIS#9 ALT_1 (4)IN_DIS#4 (13)IN_DIS#13 (5)IN_DIS#5 (2)IN_DIS#2 |
| Terminals description PLC n°3 | (COM1)COM1#0-3 (0)OUT_DIS#0 (5)OUT_DIS#5 TB_2 (NC)UNUSED (3)OUT_DIS#3 (COM2)COM2#4-7 (7)OUT_DIS#7 (1)OUT_DIS#1 (4)OUT_DIS#4 (6)OUT_DIS#6 (2)OUT_DIS#2 |
| Product weight | 0.14 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Discrete I/O module |
| Discrete input number | 4 |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Discrete output number | 4 |
| Discrete output type | Relay |
| I/O connection | Removable screw terminal block |
| Number of common point | 1I/1O |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink or source |
| Discrete input current | 7 mA |
| Input impedance | 3.4 kOhm |
| Filter time | 8 ms at state 0 8 ms at state 1 |
| Discrete output function | 4 NO |
| Current per channel | 2 A |
| Maximum current per output common | 7 A |
| Contact resistance | 40000 µOhm |
| Response time | <= 7 ms |
| Insulation between channel and internal logic | 1500 Vrms for 1 min (by photocoupler) |
| Current consumption | 20 mA at 24 V DC at state 1 for all inputs/outputs 25 mA at 5 V DC at state 1 for all inputs/outputs 5 mA at 5 V DC at state 0 for all inputs/outputs |
| Marking | CE |
| Terminals description PLC n°1 | (1)IN_DIS#1 ALT (NC)UNUSED (3)IN_DIS#3 TB_1 COM0_POS#0-3 (2)IN_DIS#2 (0)IN_DIS#0 |
| Terminals description PLC n°2 | TB_1 COM0_NEG#0-3 (2)IN_DIS#2 ALT_1 (3)IN_DIS#3 (NC)UNUSED (0)IN_DIS#0 (1)IN_DIS#1 |
| Terminals description PLC n°3 | (2)OUT_DIS#2 TB_2 (COM1)COM1#0-3 (0)OUT_DIS#0 (3)OUT_DIS#3 (1)OUT_DIS#1 |
| Product weight | 0.095 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Discrete output module |
| Discrete output number | 16 |
| Discrete output type | Relay |
| I/O connection | Removable screw terminal block |
| Number of common point | 2 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Discrete output function | 16 NO |
| Current per channel | 2 A |
| Maximum current per output common | 8 A |
| Contact resistance | 40000 µOhm |
| Response time | <= 7 ms |
| Insulation between channel and internal logic | 1500 Vrms for 1 minute |
| Current consumption | 45 mA at 5 V DC at state 1 for all inputs/outputs 5 mA at 5 V DC at state 0 for all inputs/outputs 75 mA at 24 V DC at state 1 for all inputs/outputs |
| Marking | CE |
| Terminals description PLC n°1 | (8)OUT_DIS#8 (3)OUT_DIS#3 (12)OUT_DIS#12 (13)OUT_DIS#13 COM0_POS COM0_POS#0-7 (11)OUT_DIS#11 (4)OUT_DIS#4 (14)OUT_DIS#14 (10)OUT_DIS#10 (0)OUT_DIS#0 (9)OUT_DIS#9 (2)OUT_DIS#2 (15)OUT_DIS#15 (5)OUT_DIS#5 (1)OUT_DIS#1 ALT COM1 TB (6)OUT_DIS#6 (7)OUT_DIS#7 COM1_POS#8-15 |
| Terminals description PLC n°2 | (4)OUT_DIS#4 (10)OUT_DIS#10 (12)OUT_DIS#12 (1)OUT_DIS#1 ALT_1 (15)OUT_DIS#15 COM1_NEG#8-15 (11)OUT_DIS#11 (7)OUT_DIS#7 COM0 COM1 (3)OUT_DIS#3 (14)OUT_DIS#14 TB (8)OUT_DIS#8 (13)OUT_DIS#13 COM0_NEG#0-7 (2)OUT_DIS#2 (5)OUT_DIS#5 (0)OUT_DIS#0 (6)OUT_DIS#6 (9)OUT_DIS#9 |
| Product weight | 0.145 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Twido |
| Product or component type | Discrete output module |
| Discrete output number | 8 |
| Discrete output type | Relay |
| I/O connection | Removable screw terminal block |
| Number of common point | 1 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Discrete output function | 8 NO |
| Current per channel | 2 A |
| Maximum current per output common | 7 A |
| Contact resistance | 40000 µOhm |
| Response time | <= 7 ms |
| Insulation between channel and internal logic | 1500 Vrms for 1 minute |
| Current consumption | 30 mA at 5 V DC at state 1 for all inputs/outputs 40 mA at 24 V DC at state 1 for all inputs/outputs 5 mA at 5 V DC at state 0 for all inputs/outputs |
| Marking | CE |
| Terminals description PLC n°1 | (1)OUT_DIS#1 (3)OUT_DIS#3 (2)OUT_DIS#2 (4)OUT_DIS#4 COM1_POS#4-7 TB ALT (6)OUT_DIS#6 (0)OUT_DIS#0 (7)OUT_DIS#7 (5)OUT_DIS#5 |
| Terminals description PLC n°2 | (NC)UNUSED TB COM0_NEG#0-3 (0)OUT_DIS#0 (5)OUT_DIS#5 (6)OUT_DIS#6 COM1_NEG#4-7 (1)OUT_DIS#1 ALT_1 (3)OUT_DIS#3 (7)OUT_DIS#7 (4)OUT_DIS#4 (2)OUT_DIS#2 |
| Product weight | 0.11 kg |
Modules