Ask for quote
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | Preventa safety module |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Activation threshold | < 20 V |
| Short-circuit protection | 1 A gG external IEC 947-5-1 for F1 on power supply 4 A gG external IEC 947-5-1 for F2 on safety relay outputs |
| Isolation voltage | 4000 V III 2 |
| Discrete input number | 1 double or single contact selection input IEC 1131 Type 1 1 feedback loop input IEC 1131 Type 1 1 reset PB input IEC 1131 Type 1 1 reset PB monitoring input IEC 1131 Type 1 12 emergency stop or limit switch discrete inputs IEC 1131 Type 1 |
| Discrete input logic | Positive |
| Inrush current | 0.5 A |
| Isolation between input and earth | 500 Vrms 50/60 Hz 60 s |
| Maximum power dissipation in W | 5 W |
| Safety outputs | 4 NO safety relay AGCDO gold plated volt free output |
| [Ue] rated operational voltage | 17...127 V DC relay output 19...250 V AC relay output |
| Rated power in VA | 120 VA 48 V AC-15 inductive 280 VA 110 V AC-15 inductive 550 VA 220 V AC-15 inductive 60 VA 24 V AC-15 inductive |
| Rated power in W | 60 W 24 V DC-13 inductive 100 ms |
| [Ithe] conventional enclosed thermal current | 2.5 A |
| Minimum output current | 30 mA |
| Response time on output | < 12 ms |
| Isolation between output and earth | 300 V DIN VDE 0110 part 2 1500 Vrms 50/60 Hz 60 s |
| Safety acquisition | Read feedback loop Read enable inputs Read the safety outputs control Read status of the 24 inputs Monitor external power supply of the module |
| Local signalling | for diagnostic of safety system 28 LEDs |
| Electrical connection | 1 connector removable screw terminal block 6 pins 1 connector SUB-D 44 pins for connecting the safety system |
| Cable cross section | 0.0003â¦0.004 in² (0.2â¦2.5 mm²) without cable end safety output circuit 0.002 in² (1.5 mm²) with cable end safety output circuit |
| Current consumption | < 150 mA 5 V DC <= 200 mA 24 V DC |
| Module format | Standard |
| Product Weight | 1.08 lb(US) (0.49 kg) |
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Ask for quote
Trusted By
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator