1 year warranty
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog input module |
| Analogue input number | 8 |
| Analogue input type | Pt 100 temperature probe - 200...600 °C non differential Pt 1000 temperature probe - 50...200 °C non differential |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Analogue input resolution | 12 bits |
| LSB value | 0.006 °C Pt 1000 0.2 °C Pt 100 |
| Input impedance | >= 10 kOhm |
| Sampling duration | 160 ms |
| Acquisition period | 320 ms per group of channel + 1 controller cycle time |
| Measurement error | +/- 0.3 % of full scale Pt 1000 25 °C +/- 0.5 % of full scale Pt 100 25 °C |
| Temperature coefficient | +/-0.01 %FS/°C |
| Repeat accuracy | +/- 0.1 °C |
| Total error | 1 °C Pt 1000 4 °C Pt 100 |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block power supply 8 connectors RJ11 sensors |
| Current consumption | <= 140 mA 24 V DC external 90 mA 5 V DC internal |
| Product Weight | 0.42 lb(US) (0.19 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete output module |
| Discrete output number | 8 |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V |
| Discrete output logic | Source |
| Discrete output current | 0.5 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Output voltage limits | 20.4...28.8 V |
| Current per channel | 0.6 A |
| Maximum current per output common | 4 A |
| Number of common point | 1 |
| Response time | 450 µs from state 0 to state 1 450 µs from state 1 to state 0 |
| [Ures] residual voltage | 0.4 V at state 1 |
| Maximum leakage current | 0.1 mA |
| Maximum inductive load | 10 mH |
| Maximum tungsten load | 12 W |
| Short-circuit protection | With automatic reactivaton |
| Overload protection | With automatic reactivaton |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 10 mA 5 V DC at state 1 for all output 20 mA 24 V DC at state 1 for all output |
| Local signalling | 1 display block |
| Electrical connection | 1 removable screw terminal block |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete input module |
| Discrete input number | 8 |
| Discrete input voltage | 120 V |
| Discrete input voltage type | AC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Input voltage limits | 85...132 V |
| Discrete input current | 7.5 mA |
| Input impedance | 11 kOhm |
| Number of common point | 1 |
| Response time | 25 ms at state 1 30 ms at state 0 |
| Isolation between channels | None |
| Isolation between channels and internal logic | 1500 V for 1 minute |
| Current consumption | 55 mA 5 V DC at state 1 |
| Local signalling | 1 display block |
| Electrical connection | 1 removable screw terminal block |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Counter module |
| Electrical Connection | 2 screw terminal blocks |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number of modules | 3 counter modules per TM238 base |
| Discrete input number | 12 EN/IEC 61131-2 type 1 |
| Discrete output number | 4 |
| Application specific I/O | Upcounting Frequency meter Downcounting Axis following Frequency generator Period measurement |
| Counting mode | 8 mode configurable |
| Counter inputs resolution | 31 bits + sign |
| Counting frequency | 60 kHz |
| Cycle time | 1 ms |
| Input compatibility | Incremental signal encoder with 15...30 V source outputs 2 and 3-wire sensors (24 V) |
| Type of cable | Shielded cable |
| Isolation between channels and internal logic | 1500 V for 1 minute |
| Discrete input type | Auxiliary input IN_CAP Auxiliary input IN_EN Auxiliary input IN_REF High-speed IN_A High-speed IN_B High-speed IN_SYNC |
| Discrete input logic | Positive logic (sink) |
| Discrete input voltage | 24 V DC |
| Voltage state 1 guaranteed | 15...30 V |
| Current state 1 guaranteed | 5 mA |
| Voltage state 0 guaranteed | <= 5 V |
| Current state 0 guaranteed | <= 0.5 mA |
| Discrete input current | 2 mA 11 V |
| Discrete output logic | Positive logic (source) |
| Discrete output voltage | 24 V DC 19.2...30 V |
| Discrete output current | 0.5 A |
| Load current | 2 A per module 0.5 A per output |
| Response time on output | <= 200 µs energisation/de-energisation |
| Maximum leakage current | 0.1 mA at state 0 |
| Maximum voltage drop | <3 V at state 1 |
| Short-circuit protection | Automatic reset after disappearance of fault |
| Output overload protection | 0.5...1.5 A trip current with automatic reset after fault disappearance, per o/p |
| Fallback status | Each channel held at its last value or set to the predefined value (0 or 1) Faulty channel set to 0 |
| Load inductance | L = 0.5/I²F |
| Load capacitance | 50 µF |
| Local signalling | 1 display block |
| Current consumption | <= 100 mA 24 V DC internal supply <= 100 mA 5 V DC internal supply <= 2 A 24 V DC external power supply |
| Mounting Support | 35 mm symmetrical DIN rail |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog input module |
| Analogue input number | 8 |
| Analogue input type | Pt 100 temperature probe - 200...600 °C non differential Pt 1000 temperature probe - 50...200 °C non differential |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| LSB value | 0.006 °C Pt 1000 0.2 °C Pt 100 |
| Input impedance | >= 10 kOhm |
| Sampling duration | 160 ms |
| Acquisition period | 320 ms per group of channel + 1 controller cycle time |
| Measurement error | +/- 0.3 % of full scale Pt 1000 25 °C +/- 0.5 % of full scale Pt 100 25 °C |
| Temperature coefficient | +/-0.01 %FS/°C |
| Repeat accuracy | +/- 0.1 °C |
| Total error | 1 °C Pt 1000 4 °C Pt 100 |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block power supply 1 removable screw terminal block sensors |
| Current consumption | <= 140 mA 24 V DC external 90 mA 5 V DC internal |
| Product Weight | 0.42 lb(US) (0.19 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete output module |
| Discrete output number | 32 |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V |
| Discrete output logic | Sink |
| Discrete output current | 0.1 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Output voltage limits | 20.4...28.8 V |
| Current per channel | 0.12 A |
| Maximum current per output common | 1 A |
| Number of common point | 2 |
| Response time | 300 µs from state 0 to state 1 300 µs from state 1 to state 0 |
| [Ures] residual voltage | 1 V at state 1 |
| Maximum tungsten load | 8 W |
| Short-circuit protection | Without |
| Overload protection | Without |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 20 mA 5 V DC at state 1 for all output 70 mA 24 V DC at state 1 for all output |
| Local signalling | 2 display blocks |
| Electrical connection | 1 connector HE10 |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.231 lb(US) (0.105 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | I/O expansion module |
| Analogue input number | 8 |
| Analogue input type | current 4...20 mA non differential voltage 0...10 V non differential |
| Cross talk | <= 1 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 10 bits |
| LSB value | 19.5 µA current 9.7 mV voltage |
| Permissible continuous overload | 40 mA current 13 V voltage |
| Input impedance | >= 10 kOhm voltage 470 Ohm current |
| Sampling duration | 160 ms |
| Acquisition period | 160 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 25 °C |
| Temperature coefficient | +/-0.01 %FS/°C |
| Repeat accuracy | +/- 0.4 %FS |
| Non-linearity | +/- 0.002 %FS |
| Total error | +/-1 %FS |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Electrical connection | 1 removable screw terminal block power supply 1 removable screw terminal block sensors |
| Current consumption | 45 mA 24 V DC external 60 mA 5 V DC internal |
| Product Weight | 0.187 lb(US) (0.085 kg) |
This analog input module is part of Modicon TM2 expansion modules It consists in 4 analog inputs, voltage 0â¦10 V, current 0â¦20 mA, and temperature probe PT100/PT1000 and is supplied with 24V dc. It is equipped with one removable screw terminal block and can be mounted on a symmetrical DIN rail 35 mm.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | I/O expansion module |
| Analogue input number | 4 |
| Analogue input type | voltage 0...10 V non differential Pt 100/Pt 1000 temperature probe - 200...600 °C non differential Ni 100/Ni 1000 temperature probe - 50...150 °C non differential current 0...20 mA non differential |
| Cross talk | <= 1 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| LSB value | 2.5 mV voltage voltage 4.8 µA current current 0.2 °C temperature probe Pt 100/Pt 1000 0.05 °C temperature probe Ni 100/Ni 1000 |
| Permissible continuous overload | 40 mA current 13 V voltage |
| Input impedance | >= 10 kOhm temperature probe 470 Ohm current 10 kOhm voltage |
| Sampling duration | 160 ms |
| Acquisition period | 320 ms per channel + 1 controller cycle time temperature probe 160 ms per channel + 1 controller cycle time voltage/current |
| Measurement error | +/- 0.2 % of full scale 0...10 V 0...10 V 25 °C +/- 0.2 % of full scale 4...20 mA 4...20 mA 25 °C +/- 0.4 % of full scale Pt 100/Pt 1000, Ni 100/ Ni 1000 25 °C |
| Temperature coefficient | +/- 0.004 %FS/°C temperature probe +/- 0.009 %FS/°C current +/- 0.009 %FS/°C voltage |
| Repeat accuracy | +/-0.1 %FS |
| Non-linearity | +/- 0.02 %FS |
| Total error | +/-0.5 %FS |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 50 mA 5 V DC internal 60 mA 24 V DC external |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Schneider
TM200RSRCEMC Schneider Electric Modicon M238 logic controller Connection accessory
Sale price€0,00
Sold OutMain
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Accessory / separate part category | Connection accessories |
| Accessory / Separate Part Type | Clamp |
| Accessory / separate part designation | Shielding connection clamp |
| Product Specific Application | Attach and ground the shielding of the cables |
| Quantity per Set | Set of 25 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number of clamp | 20 5 0.01 in² (7.9 mm²) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Input/output analog module |
| Analogue input number | 2 |
| Input level | High level |
| Analogue input type | current 4...20 mA non differential voltage 0...10 V non differential |
| Analogue output number | 1 |
| Analogue output type | Current 4...20 mA Voltage 0...10 V |
| Cross talk | <= 2 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| Analogue output resolution | 12 bits |
| LSB value | 2.5 mV voltage voltage 4.8 µA current current |
| Permissible continuous overload | 40 mA current 13 V voltage |
| Input impedance | >= 10 Ohm current >= 1 MOhm voltage |
| Load type | Resistive |
| Load impedance ohmic | >= 2000 Ohm voltage <= 300 Ohm current |
| Stabilisation time | 20 ms |
| Conversion time | 20 ms + 1 controller cycle time |
| Sampling duration | 10 ms |
| Acquisition period | 60 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 0...10 V 0...10 V 25 °C +/- 0.2 % of full scale 4...20 mA 4...20 mA 25 °C |
| Temperature coefficient | +/-0.006 %FS/°C 0...10 V +/-0.006 %FS/°C 4...20 mA +/-0.015 %FS/°C 0...10 V 0...10 V +/-0.015 %FS/°C 4...20 mA 4...20 mA |
| Repeat accuracy | +/-0.5 %FS input/output |
| Non-linearity | +/- 0.2 %FS current current +/- 0.2 %FS voltage voltage |
| Output error | +/- 1 %FS |
| Output ripple | <= 1 LSB |
| Total error | +/-1 %FS current current +/-1 %FS voltage voltage |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 50 mA 24 V DC external 50 mA 5 V DC internal |
| Product Weight | 0.187 lb(US) (0.085 kg) |
PC FIP MODULE,�SCHNEIDER ELECTRIC TSX-FPC-10 / TSXFPC10
This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. The sub-base with plug-in electromechanical relay, provides 16 channels. It has change over contact. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 19V to 30V DC and a maximum supply current of 1A. It is an IP2x rated product. It weighs 0.775kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. This sub-base is suitable for use with ABR7S23 plug-in relay. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon ABE7 |
| Product or Component Type | Sub-base with plug-in electromechanical relay |
| Sub-base type | Output sub-base |
| [Us] rated supply voltage | 19...30 V IEC 61131-2 |
| Number of channels | 16 |
Complementary
| Characteristic | Value(s) |
|---|---|
| supply voltage type | DC |
| Product Compatibility | ABR7S23 |
| Contacts type and composition | 1 C/O |
| Status LED | 1 LED per channel (Green) channel status 1 LED (Green) power ON |
| Polarity distribution | Volt-free |
| Short-circuit protection | 1 A internal fuse, 5 x 20 mm, fast blow PLC end) |
| Fixing mode | By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit) |
| Maximum supply current | 1 A |
| Voltage drop on power supply fuse | 0.3 V |
| [Ui] rated insulation voltage | 2000 V terminals/mounting rails 300 V coil circuit/contact circuits IEC 60947-1 |
| [Uimp] rated impulse withstand voltage | 2.5 kV |
| Installation category | II IEC 60664-1 |
| Tightening torque | 5.3 lbf.in (0.6 N.m) flat à 3.5 mm |
| Product Weight | 1.709 lb(US) (0.775 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | I/O expansion module |
| Analogue input number | 2 |
| Input level | High level |
| Analogue input type | current 4...20 mA non differential voltage 0...10 V non differential |
| Cross talk | <= 2 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| LSB value | 2.5 mV voltage voltage 4.8 µA current current |
| Permissible continuous overload | 40 mA current 13 V voltage |
| Input impedance | >= 1 MOhm voltage 10 Ohm current |
| Sampling duration | 10 ms |
| Acquisition period | 10 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 25 °C |
| Temperature coefficient | +/-0.006 %FS/°C |
| Repeat accuracy | +/-0.5 %FS |
| Non-linearity | +/- 0.2 %FS |
| Total error | +/-1 %FS |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 50 mA 5 V DC internal 40 mA 24 V DC external |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Counter module |
| Electrical Connection | 2 spring terminal blocks |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number of modules | 3 counter modules per TM238 base |
| Discrete input number | 12 EN/IEC 61131-2 type 1 |
| Discrete output number | 4 |
| Application specific I/O | Frequency generator Downcounting Frequency meter Upcounting Period measurement Axis following |
| Counting mode | 8 mode configurable |
| Counter inputs resolution | 31 bits + sign |
| Counting frequency | 60 kHz |
| Cycle time | 1 ms |
| Input compatibility | Incremental signal encoder with 15...30 V source outputs 2 and 3-wire sensors (24 V) |
| Type of cable | Shielded cable |
| Isolation between channels and internal logic | 1500 V for 1 minute |
| Discrete input type | Auxiliary input IN_CAP Auxiliary input IN_EN Auxiliary input IN_REF High-speed IN_A High-speed IN_B High-speed IN_SYNC |
| Discrete input logic | Positive logic (sink) |
| Discrete input voltage | 24 V DC |
| Voltage state 1 guaranteed | 15...30 V |
| Current state 1 guaranteed | 5 mA |
| Voltage state 0 guaranteed | <= 5 V |
| Current state 0 guaranteed | <= 0.5 mA |
| Discrete input current | 2 mA 11 V |
| Discrete output logic | Positive logic (source) |
| Discrete output voltage | 24 V DC 19.2...30 V |
| Discrete output current | 0.5 A |
| Load current | 2 A per module 0.5 A per output |
| Response time on output | <= 200 µs energisation/de-energisation |
| Maximum leakage current | 0.1 mA at state 0 |
| Maximum voltage drop | <3 V at state 1 |
| Short-circuit protection | Automatic reset after disappearance of fault |
| Output overload protection | 0.5...1.5 A trip current with automatic reset after fault disappearance, per o/p |
| Fallback status | Faulty channel set to 0 Each channel held at its last value or set to the predefined value (0 or 1) |
| Load inductance | L = 0.5/I²F |
| Load capacitance | 50 µF |
| Local signalling | 1 display block |
| Current consumption | <= 100 mA 24 V DC internal supply <= 100 mA 5 V DC internal supply <= 2 A 24 V DC external power supply |
| Mounting Support | 35 mm symmetrical DIN rail |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Accessory / separate part category | Mounting accessories |
| Accessory / Separate Part Type | Base |
| Accessory / separate part designation | Mounting base |
| Accessory / separate part destination | Internal bus extension |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product Compatibility | STBXBE1200 |
| Width | 0.7 in (18.4 mm) |
| Product Weight | 0.073 lb(US) (0.033 kg) |
This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. This passive connection sub-base provides 16 modularity input/output channels. It has 1 terminal per channel. It is a sub base with a maximum supply current of 1.8A and a rated supply voltage of 19V to 30V. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. Its dimension is 125mm (Width). It weighs 0.274kg. It is suitable for all types of industrial applications. This product is certified by GL, BV, CSA, UL, DNV and LROS. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon ABE7 |
| Product or Component Type | Passive discrete I/O sub-base |
| Sub-base type | I/O sub-base |
| [Us] rated supply voltage | 19...30 V IEC 61131-2 |
| Number of channels | 16 |
| Number of terminal per channel | 1 |
| Connections - terminals | Screw type terminals, 1 x 0.09...1 x 1.5 mm² AWG 28...AWG 16) flexible with cable end Screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 12) solid Screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14) flexible without cable end Screw type terminals, 2 x 0.09...2 x 0.75 mm² AWG 28...AWG 20) flexible with cable end Screw type terminals, 2 x 0.2...2 x 2.5 mm² AWG 24...AWG 14) solid |
Complementary
| Characteristic | Value(s) |
|---|---|
| supply voltage type | DC |
| Number of horizontal rows | 1 |
| Status LED | 1 LED per channel (Green) channel status 1 LED (Green) power ON |
| Polarity distribution | No |
| Short-circuit protection | 2 A internal fuse, 5 x 20 mm, fast blow PLC end) |
| Connector Type | HE-10 |
| Pin number | 20 pins |
| Fixing mode | By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit) |
| Maximum supply current | 1.8 A |
| Current per channel | 0.5 A |
| Maximum current per output common | 1.8 A |
| Voltage drop on power supply fuse | 0.3 V |
| [Ui] Rated Insulation Voltage | 2000 V |
| Installation category | II IEC 60664-1 |
| Tightening torque | 5.3 lbf.in (0.6 N.m) flat à 3.5 mm |
| Width | 4.9 in (125 mm) |
| Product Weight | 0.604 lb(US) (0.274 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog input module |
| Analogue input number | 2 |
| Input level | Low level |
| Analogue input type | thermocouple - 200...760 °C thermocouple J differential thermocouple - 270...1370 °C thermocouple K differential thermocouple - 270...400 °C thermocouple T differential |
| Cross talk | <= 2 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Analogue input resolution | 12 bits |
| LSB value | 0.1 °C thermocouple thermocouple T 0.3 °C thermocouple thermocouple J 0.325 °C thermocouple thermocouple K |
| Permissible continuous overload | +/- 7.5 V thermocouple |
| Input impedance | >= 1 MOhm thermocouple |
| Sampling duration | 200 ms |
| Acquisition period | 200 ms per channel + 1 controller cycle time |
| Measurement error | 0.2 % +/- 5 °C of full scale 25 °C |
| Temperature coefficient | +/-0.006 %FS/°C |
| Repeat accuracy | +/-0.5 %FS |
| Non-linearity | +/- 0.2 %FS |
| Total error | +/-1 %FS |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 30 mA 24 V DC external 60 mA 5 V DC internal |
| Product Weight | 0.187 lb(US) (0.085 kg) |
This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. This passive connection sub-base provides 16 modularity input/output channels. It has 2 terminals per channel. It is a sub base with a maximum supply current of 1.8A and a rated supply voltage of 19V to 30V. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. Its dimension is 125mm (Width). It weighs 0.3kg. It is suitable for all types of industrial applications. This product is certified by GL, BV, CSA, UL, DNV and LROS. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon ABE7 |
| Product or Component Type | Passive discrete I/O sub-base |
| Sub-base type | I/O sub-base |
| [Us] rated supply voltage | 19...30 V IEC 61131-2 |
| Number of channels | 16 |
| Number of terminal per channel | 2 |
| Connections - terminals | Screw type terminals, 1 x 0.09...1 x 1.5 mm² AWG 28...AWG 16) flexible with cable end Screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 12) solid Screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14) flexible without cable end Screw type terminals, 2 x 0.09...2 x 0.75 mm² AWG 28...AWG 20) flexible with cable end Screw type terminals, 2 x 0.2...2 x 2.5 mm² AWG 24...AWG 14) solid |
Complementary
| Characteristic | Value(s) |
|---|---|
| supply voltage type | DC |
| Number of horizontal rows | 2 |
| Status LED | 1 LED per channel (Green) channel status 1 LED (Green) power ON |
| Polarity distribution | 0 V or 24 V |
| Short-circuit protection | 2 A internal fuse, 5 x 20 mm, fast blow PLC end) |
| Connector Type | HE-10 |
| Pin number | 20 pins |
| Fixing mode | By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit) |
| Maximum supply current | 1.8 A |
| Current per channel | 0.5 A |
| Maximum current per output common | 1.8 A |
| Voltage drop on power supply fuse | 0.3 V |
| [Ui] Rated Insulation Voltage | 2000 V |
| Installation category | II IEC 60664-1 |
| Tightening torque | 5.3 lbf.in (0.6 N.m) flat à 3.5 mm |
| Width | 4.9 in (125 mm) |
| Product Weight | 0.7 lb(US) (0.3 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon ABE7 |
| Product or Component Type | Passive discrete I/O sub-base |
| Sub-base type | Type 2 input sub-base |
| [Us] rated supply voltage | 19...30 V IEC 61131-2 |
| Number of channels | 16 |
| Number of terminal per channel | 2 |
| Connections - terminals | Screw type terminals, 1 x 0.09...1 x 1.5 mm² AWG 28...AWG 16) flexible with cable end Screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 12) solid Screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14) flexible without cable end Screw type terminals, 2 x 0.09...2 x 0.75 mm² AWG 28...AWG 20) flexible with cable end Screw type terminals, 2 x 0.2...2 x 2.5 mm² AWG 24...AWG 14) solid |
Complementary
| Characteristic | Value(s) |
|---|---|
| supply voltage type | DC |
| Number of horizontal rows | 2 |
| Status LED | 1 LED per channel (Green) channel status 1 LED (Green) power ON |
| Polarity distribution | 0 V or 24 V |
| Short-circuit protection | 2 A internal fuse, 5 x 20 mm, fast blow PLC end) |
| Connector Type | HE-10 |
| Pin number | 20 pins |
| Fixing mode | By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit) |
| Maximum supply current | 1.8 A |
| Current per channel | 0.5 A |
| Maximum current per output common | 1.8 A |
| Voltage drop on power supply fuse | 0.3 V |
| [Ui] Rated Insulation Voltage | 2000 V |
| Installation category | II IEC 60664-1 |
| Tightening torque | 5.3 lbf.in (0.6 N.m) flat à 3.5 mm |
| Width | 4.9 in (125 mm) |
| Product Weight | 0.71 lb(US) (0.32 kg) |
sub-base - soldered electromechanical relays ABE7 - 16 channels - relay 10 mm
This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. The sub-base with plug-in electromechanical relay, provides 16 channels. It has normally opened contact. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 19V to 30V DC and a maximum supply current of 1A. It is an IP2x rated product. It weighs 0.735kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. This sub-base is suitable for use with ABR7S21 plug-in relay. The fixing is done by clips (35mm DIN rail) and screws (surface mount with kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon ABE7 |
| Product or Component Type | Sub-base with plug-in electromechanical relay |
| Sub-base type | Output sub-base |
| [Us] rated supply voltage | 19...30 V IEC 61131-2 |
| Number of channels | 16 |
Complementary
| Characteristic | Value(s) |
|---|---|
| supply voltage type | DC |
| Product Compatibility | ABR7S21 |
| Contacts type and composition | 1 NO |
| Status LED | 1 LED per channel (Green) channel status 1 LED (Green) power ON |
| Polarity distribution | Volt-free |
| Short-circuit protection | 1 A internal fuse, 5 x 20 mm, fast blow PLC end) |
| Fixing mode | By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit) |
| Maximum supply current | 1 A |
| Voltage drop on power supply fuse | 0.3 V |
| [Ui] rated insulation voltage | 2000 V terminals/mounting rails 300 V coil circuit/contact circuits IEC 60947-1 |
| [Uimp] rated impulse withstand voltage | 2.5 kV |
| Installation category | II IEC 60664-1 |
| Tightening torque | 5.3 lbf.in (0.6 N.m) flat à 3.5 mm |
| Product Weight | 1.620 lb(US) (0.735 kg) |
This product is part of the Modicon STB range, an offer of modular distributed I/O. This basic discrete output kit has 16 discrete outputs with solid state output. It is a discrete output kit with a rated supply voltage of 24V DC and a current consumption of 135mA at 5V DC for logic bus. This product is compatible with most major fieldbus networks. It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 13.9mm (height) and weighs 0.086kg. It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, CE, UL and CSA. It meets EN/IEC 61131-2 type 3 standards. This kit is suitable for use with power distribution module STBPDT3100/3105 and I/O base STBXBA3000. The kit includes STBXBA3000 base, STBXTS2180, 18-terminal spring clamp connector and STBDDO3705 module. The Modicon LMC058 is the optimum solution for axis control and positioning, including automation functions. It forms a part of flexible machine control approach, a key component of MachineStruxure.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Basic digital output kit |
| Kit composition | STBXBA3000 base STBXTS2180, 18-terminal spring clamp connector STBDDO3705 module |
| Discrete output number | 16 |
| Discrete output type | Solid state |
| Discrete output voltage | 24 V |
| Discrete output voltage type | DC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Discrete output current | 500 mA |
| Discrete output logic | Positive |
| Output voltage | 19.2...30 V DC |
| Absolute maximum voltage | 35 V 1.3 ms |
| Response Time | 2 ms off-to-on 2 ms on-to-off |
| Cold swapping | Yes |
| hot swapping | No for basic NIMs |
| Protection type | Power protection integrated fuse on PDM time lag 5 A Reverse polarity protection Short-circuit protection Thermal overload protection |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Maximum leakage current | 0.4 mA at state 0 30 V |
| Maximum load capacitance | 10 µF |
| Maximum load inductance | 1000 mH 4 Hz |
| Reset | Manual reset COM fault |
| Product Compatibility | Power distribution module STBPDT3100/3105 I/O base STBXBA3000 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 135 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) 1 LED per channel (Green) channel status (OUT1 to OUT16) |
| Height | 0.5 in (13.9 mm) |
| Depth | 2.8 in (70 mm) |
| Width | 5.05 in (128.3 mm) |
| Product Weight | 0.190 lb(US) (0.086 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Accessory / separate part category | Connection accessories |
| Accessory / Separate Part Type | Removable field wiring connector |
| Accessory / separate part destination | Power distribution module |
| Connector Type | Screw connector |
| Quantity per Set | Set of 10 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Pin number | 2 |
| Product Weight | 0.013 lb(US) (0.006 kg) |
Main category name:Modules Sub category name:Modules Vendor:Schneider