1 year warranty
module TM3 - 8 IO relays spring
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon TM3 |
| Product Compatibility | Logic controller Motion controller |
| Product or Component Type | I/O distributed module |
| Product Specific Application | Bus coupler module |
Complementary
| Characteristic | Value(s) |
|---|---|
| Communication Port Protocol | Modbus serial |
| Connector type | RJ45 2 serial link daisy chain isolated USB device port Mini-B |
| Exchange mode | Half duplex |
| Transmission Rate | 1.2...115.2 kbit/s |
| Topology | Daisy chain |
| Communication Network Type | Modbus |
| Communication Service | Modbus slave device profile |
| Web services | Web server, USB |
| Current consumption | 0.8 A 24 V DC internal supply maximum 7 expansion modules |
| Local signalling | 1 LED green/red PWR (System Status) 1 LED green/red COM (Run) 1 LED green/red ERR (Error) 1 LED green/red I/O status |
| Fixing mode | By clipping locks (rail) By screws (mounting plate) |
| Product Certifications | CE cULus EAC RCM UKCA EU-RO MR |
| Standards | IEC 61131-2 UL/CSA 61010-1 UL/CSA 61010-2-201 |
| Width | 1.06 in (27 mm) |
| Height | 3.8 in (96.5 mm) |
| Depth | 2.8 in (70 mm) |
| Product Weight | 0.22 lb(US) (0.10 kg) |
module TM3 - 8 inputs 120V AC
IP20 I/O Distributed Optimized TM3 Bus Coupler Module CANopen Interface
This product is part of the Modicon M238 range, an offer of compact logic controllers from 18 to 96 I/O. The discrete output module provides 32 transistor outputs with source (negative) logic. It is an output module with an output voltage of 24V, a current consumption of 40mA at 24V DC and an output current of 0.4mA. It is furnished with HE10 connector for electrical connection. Its dimensions are 33.5mm (Width) x 81.3mm (Depth) x 90mm (Height). It weighs 0.105kg. This product is compatible with Advantys OTB and Twido ranges. It supports 35mm symmetrical DIN rail mount. The Modicon M238 programmable controllers provide optimised solution to repetitive machines based on high speed counting and simple positioning features for 1 to 4 axis through PTO channels or CANopen. Modicon M238 programmable controllers (PLCs) provide simple and intelligent solutions to meet all your business needs, 20 to 248 I/O 0.3µs per instruction.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete output module |
| Discrete output number | 32 |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V |
| Discrete output logic | Source |
| Discrete output current | 0.4 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Output voltage limits | 20.4...28.8 V |
| Current per channel | 0.48 A |
| Maximum current per output common | 2 A |
| Number of common point | 2 |
| Response time | 450 µs from state 0 to state 1 450 µs from state 1 to state 0 |
| [Ures] residual voltage | 0.4 V at state 1 |
| Maximum leakage current | 0.1 mA |
| Maximum inductive load | 10 mH |
| Maximum tungsten load | 9.6 W |
| Short-circuit protection | With automatic reactivaton |
| Overload protection | With automatic reactivaton |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 25 mA 5 V DC at state 1 for all output 40 mA 24 V DC at state 1 for all output |
| Local signalling | 2 display blocks |
| Electrical connection | 1 connector HE10 |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.231 lb(US) (0.105 kg) |
Analog input module, Modicon TM3, 4 inputs (spring) 24 VDC
This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The analogue output module provides 2 outputs with 11bit + sign and 12bit resolution. It is an output module with a rated supply voltage of 24V DC and a current consumption of 70mA at 24V DC via external supply full load. This product is capable of controlling variable speed drives or any device equipped with a current or voltage input. There is an insulation between output and supply at 1500V AC, output and internal logic at 500V AC. It is furnished with removable spring terminal for electrical connection with 5.08mm pitch adjustment for outputs. It is an IP20 rated product. Its dimensions are 23.6mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.1kg. This product is certified by CE. It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. This module is compatible with Modicon M241, Modicon M251 and Modicon M221 logic controller. It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount. Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism. A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers. Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon TM3 |
| Product or Component Type | Analog output module |
| Range Compatibility | Modicon M221 Modicon M241 Modicon M251 Modicon M262 |
| Analogue output number | 2 |
| Analogue output type | Current 4...20 mA Current 0...20 mA Voltage 0...10 V Voltage - 10...10 V |
Complementary
| Characteristic | Value(s) |
|---|---|
| Analogue input resolution | 12 bits 11 bits + sign |
| Analogue output resolution | 11 bits + sign 12 bits |
| LSB value | 2.44 mV 0...10 V voltage 4.88 mV - 10...10 V voltage 4.88 µA 0...20 mA current 3.91 µA 4...20 mA current |
| Load type | Resistive |
| Load impedance ohmic | 1 kOhm voltage 300 Ohm current |
| Stabilisation time | 1 ms |
| Conversion time | 1 ms + 1 ms per channel + 1 controller cycle time |
| Absolute accuracy error | +/- 0.1 % of full scale at 77 °F (25 °C) +/- 1 % of full scale |
| Temperature Drift | +/- 0.006 %FS/°C |
| Repeat accuracy | +/- 0.4 %FS |
| Non-linearity | +/- 0.01 %FS |
| Output ripple | 20 mV |
| Cross talk | <= 1 LSB |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Type of cable | Twisted shielded pairs cable <98.4 ft (30 m) output |
| Current consumption | 40 mA 5 V DC via bus connector full load 35 mA 5 V DC via bus connector no load 30 mA 24 V DC via external supply no load 70 mA 24 V DC via external supply full load |
| Local signalling | 1 LED (green) for PWR |
| Electrical connection | 11 x 2.5 mm² removable spring terminal block pitch 5.08 mm for outputs and supply |
| Insulation | Between output and supply 1500 V AC Between output and internal logic 500 V AC |
| Marking | CE |
| Surge withstand | 1 kV power supply common mode IEC 61000-4-5 0.5 kV power supply differential mode IEC 61000-4-5 1 kV output common mode IEC 61000-4-5 |
| Mounting support | Top hat type TH35-15 rail IEC 60715 Top hat type TH35-7.5 rail IEC 60715 plate or panel with fixing kit |
| Height | 3.5 in (90 mm) |
| Depth | 2.8 in (70 mm) |
| Width | 0.9 in (23.6 mm) |
| Product Weight | 0.2 lb(US) (0.1 kg) |
This bus extension kit is part of the Modicon STB range, an offer of IP20 modular distributed I/Os on multiple networks and fieldbus. This EOS internal bus extension kit is furnished with FireWire for interface. It is an IP20 rated product. It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines. This product is certified by CE, FM Class 1 Division 2, CSA, UL. It is compatible with standard STB modules. The kit includes STBXTS1120, 2-terminal screw type connector, STBXTS2120, 2-terminal spring clamp connector, STBXBA2400 size 2 base and STBXBE1100 module. Advantys distributed I/O solutions are simple, open and flexible, meeting needs in every stage of the product life cycle. For distributed connection to sensors and actuators from a PLC with prefabricated cables.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | EOS internal bus extension kit |
Complementary
| Characteristic | Value(s) |
|---|---|
| Kit composition | STBXBE1100 module STBXBA2400 size 2 base STBXTS2120, 2-terminal spring clamp connector STBXTS1120, 2-terminal screw type connector |
| Mounting Location | End of segment (except for the last segment) |
| Product Compatibility | Standard STB modules |
| Electrical connection | Firewire interface |
| Marking | CE |
| Overvoltage category | II |
Analog input module, Modicon TM3, 2 inputs high resolution (screw) 24 VDC
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Accessory / separate part category | Mounting accessories |
| Accessory / Separate Part Type | Base |
| Accessory / separate part designation | Mounting base |
| Accessory / separate part destination | Internal bus extension |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product Compatibility | STBXBE1000 |
| Width | 0.7 in (18.4 mm) |
| Product Weight | 0.062 lb(US) (0.028 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete I/O module |
| Discrete input number | 4 |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Discrete output number | 4 |
| Discrete output type | Relay |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink or source |
| Discrete input current | 7 mA |
| Input impedance | 3.4 kOhm |
| Discrete output function | 1 NO |
| Current per channel | 2 A |
| Maximum current per output common | 7 A |
| Number of common point | 1 for output 1 for input |
| Contact resistance | 45 mOhm |
| Response time | <= 10 ms from state 0 to state 1 output <= 5 ms from state 1 to state 0 output 4 ms at state 0 input 4 ms at state 1 input |
| Minimum switching current | 0.1 mA 0.1 V DC |
| Isolation between channels | None |
| Isolation between channels and internal logic | 2300 V for 1 minute (output) 500 V for 1 minute (input) |
| Isolation between input channel and output channel | 1500 V for 1 minute |
| Isolation between output channels group | 1500 V for 1 minute |
| Mechanical durability | 20000000 cycles |
| Electrical durability | 100000 cycles 0.5 A AC-15 240 V AC cos phi = 0.35 inductive 100000 cycles 1 A AC-15 240 V AC cos phi = 0.7 inductive 100000 cycles 1 A DC-13 24 V DC inductive (L/R = 7 ms) 100000 cycles 2 A 240 V AC resistive 100000 cycles 2 A 30 V DC resistive |
| Current consumption | 20 mA 24 V DC at state 1 for all input/output 25 mA 5 V DC at state 1 for all input/output |
| Local signalling | 1 display block |
| Electrical connection | 1 removable screw terminal block |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.209 lb(US) (0.095 kg) |
This digital output module is part of the range Modicon TM2 expansion modules. It consists in 8 N/O relay outputs 230V ac / 30 V dc. It is equipped with one removable screw terminal block and can be mounted on a symmetrical DIN rail 35 mm. It is compatible with Modicon OTB interface modules, Magelis HMI controller XBTGC and Modicon / Twido controllers.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | I/O expansion module |
| Discrete output number | 8 |
| Discrete output type | Relay |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Discrete output function | 1 NO |
| Current per channel | 2 A |
| Maximum current per output common | 7 A |
| Number of common point | 2 |
| Contact resistance | 45 mOhm |
| Response time | <= 10 ms from state 0 to state 1 input <= 5 ms from state 1 to state 0 input |
| Minimum switching current | 0.1 mA 0.1 V DC |
| Isolation between channels | 1500 V for 1 minute |
| Isolation between channels and internal logic | 2300 V for 1 minute |
| Isolation between output channels group | 1500 V for 1 minute |
| Mechanical durability | 20000000 cycles |
| Electrical durability | 100000 cycles 0.5 A AC-15 240 V AC cos phi = 0.35 inductive 100000 cycles 1 A AC-15 240 V AC cos phi = 0.7 inductive 100000 cycles 1 A DC-13 24 V DC inductive (L/R = 7 ms) 100000 cycles 2 A 240 V AC resistive 100000 cycles 2 A 30 V DC resistive |
| Current consumption | 30 mA 5 V DC at state 1 for all output 40 mA 24 V DC at state 1 for all output |
| Local signalling | 1 display block |
| Electrical connection | 1 removable screw terminal block |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.24 lb(US) (0.11 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | I/O expansion module |
| Discrete input number | 8 |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink or source |
| Discrete input current | 7 mA |
| Input impedance | 3.4 kOhm |
| Number of common point | 1 |
| Response time | 4 ms at state 0 4 ms at state 1 |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 25 mA 5 V DC at state 1 for all input |
| Local signalling | 1 display block |
| Electrical connection | 1 removable screw terminal block |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.2 lb(US) (0.1 kg) |
Analog input module, Modicon TM3, 2 inputs high resolution (spring) 24 VDC
This digital output module is part of the range Modicon TM2 expansion modules. It consists in 16 transistor outputs 24V dc. It is equipped with 1 x HE 10 connector and can be mounted on a symmetrical DIN rail 35 mm. It is compatible with Modicon OTB interface modules, Magelis HMI controller XBTGC and Modicon / Twido controllers .
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete output module |
| Discrete output number | 16 |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V |
| Discrete output logic | Source |
| Discrete output current | 0.4 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Output voltage limits | 20.4...28.8 V |
| Current per channel | 0.48 A |
| Maximum current per output common | 2 A |
| Number of common point | 1 |
| Response time | 450 µs from state 0 to state 1 450 µs from state 1 to state 0 |
| [Ures] residual voltage | 1 V at state 1 |
| Maximum leakage current | 0.1 mA |
| Maximum inductive load | 10 mH |
| Maximum tungsten load | 9.6 W |
| Short-circuit protection | With automatic reactivaton |
| Overload protection | With automatic reactivaton |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 15 mA 5 V DC at state 1 for all output 20 mA 24 V DC at state 1 for all output |
| Local signalling | 2 display blocks |
| Electrical connection | 1 connector HE10 |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.15 lb(US) (0.07 kg) |
Discrete input module, Modicon M238 logic controller, 16 inputs 24 V DC, 1 connector HE10
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete output module |
| Discrete output number | 16 |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V |
| Discrete output logic | Sink |
| Discrete output current | 0.1 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Output voltage limits | 20.4...28.8 V |
| Current per channel | 0.12 A |
| Maximum current per output common | 1 A |
| Number of common point | 1 |
| Response time | 300 µs from state 0 to state 1 300 µs from state 1 to state 0 |
| [Ures] residual voltage | 1 V at state 1 |
| Maximum tungsten load | 8 W |
| Short-circuit protection | Without |
| Overload protection | Without |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 10 mA 5 V DC at state 1 for all output 40 mA 24 V DC at state 1 for all output |
| Local signalling | 2 display blocks |
| Electrical connection | 1 connector HE10 |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.15 lb(US) (0.07 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete output module |
| Discrete output number | 8 |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V |
| Discrete output logic | Sink |
| Discrete output current | 0.3 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Output voltage limits | 20.4...28.8 V |
| Current per channel | 0.36 A |
| Maximum current per output common | 3 A |
| Number of common point | 1 |
| Response time | 300 µs at state 0 300 µs at state 1 |
| [Ures] residual voltage | 1 V at state 1 |
| Maximum tungsten load | 8 W |
| Short-circuit protection | Without |
| Overload protection | Without |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 10 mA 5 V DC at state 1 for all output 20 mA 24 V DC at state 1 for all output |
| Local signalling | 1 display block |
| Electrical connection | 1 removable screw terminal block |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Discrete input module |
| Discrete input number | 32 |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Twido Advantys OTB |
| Input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink or source |
| Discrete input current | 5 mA |
| Input impedance | 4.4 kOhm |
| Number of common point | 2 |
| Response time | 4 ms at state 0 4 ms at state 1 |
| Isolation between channels | None |
| Isolation between channels and internal logic | 500 V for 1 minute |
| Current consumption | 65 mA 5 V DC at state 1 for all input |
| Local signalling | 2 display blocks |
| Electrical connection | 1 connector HE10 |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.179 lb(US) (0.081 kg) |
EMERGENCY STOP MONITORING MODULE, 8I, 24 VDC+2Q
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog output module |
| Analogue output number | 2 |
| Analogue output type | Voltage +/- 10 V |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Analogue output resolution | 11 bits + sign |
| LSB value | +/- 9.8 mV voltage |
| Load type | Resistive |
| Load impedance ohmic | <= 3000 Ohm voltage |
| Stabilisation time | 2 ms |
| Conversion time | 2 ms + 1 controller cycle time |
| Measurement error | +/- 0.5 % of full scale 25 °C |
| Temperature coefficient | +/-0.01 %FS/°C |
| Repeat accuracy | +/-0.1 %FS |
| Non-linearity | +/- 0.2 %FS |
| Output ripple | <= 1 LSB |
| Total error | +/-1 %FS |
| Type of Cable | Twisted shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 60 mA 5 V DC internal 60 mA 24 V DC external |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog input module |
| Analogue input number | 8 |
| Analogue input type | PTC/NTC temperature probe 100...10000 Ohm non differential |
| Cross talk | <= 1 LSB |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Analogue input resolution | 10 bits NTC |
| Input impedance | >= 1 MOhm |
| Sampling duration | 160 ms |
| Acquisition period | 160 ms per channel + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 25 °C |
| Temperature coefficient | +/-0.01 %FS/°C |
| Repeat accuracy | +/- 0.4 %FS |
| Non-linearity | +/- 0.002 %FS |
| Total error | +/-1 %FS |
| Type of Cable | Shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 20.4â¦28.8 V |
| Electrical connection | 1 removable screw terminal block power supply 1 removable screw terminal block sensors |
| Current consumption | 45 mA 24 V DC external 60 mA 5 V DC internal |
| Product Weight | 0.187 lb(US) (0.085 kg) |
Discrete input module M238 - 16 inputs 24V DC - 1 removable screw terminal block
This analog output module is part of the range Modicon TM2 expansion modules. It consists one analog output, 0V to 10V or 4mA to 20 mA with 12 bits resolution. It is equipped with one removable screw terminal block and can be mounted on a symmetrical DIN rail 35 mm. It is compatible with Modicon OTB interface modules, Magelis HMI controller XBTGC and Modicon / Twido controllers.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M238 logic controller |
| Product or Component Type | Analog output module |
| Analogue output number | 1 |
| Analogue output type | Current 4...20 mA Voltage 0...10 V |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Advantys OTB Twido |
| Analogue output resolution | 12 bits |
| LSB value | 2.5 mV voltage voltage 4.8 µA current current |
| Load type | Resistive |
| Load impedance ohmic | >= 2000 Ohm voltage <= 300 Ohm current |
| Stabilisation time | 10 ms |
| Conversion time | 10 ms + 1 controller cycle time |
| Measurement error | +/- 0.2 % of full scale 25 °C |
| Temperature coefficient | +/-0.015 %FS/°C |
| Repeat accuracy | +/-0.5 %FS |
| Non-linearity | +/- 0.2 %FS |
| Output ripple | <= 1 LSB |
| Total error | +/-1 %FS |
| Type of Cable | Twisted shielded cable |
| Insulation between channel and internal logic | Photocoupler |
| Supply | External supply |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2â¦30 V |
| Electrical connection | 1 removable screw terminal block |
| Current consumption | 50 mA 5 V DC internal 40 mA 24 V DC external |
| Product Weight | 0.187 lb(US) (0.085 kg) |