Measurement Sensors

Showing 337 - 360 of 719 products

€566,95

Only 10 units left

Specifications

Model			LJ-V7020^*1
Mounting conditions			Diffuse reflection
Reference distance			20 mm 0.79"
Measurement range	Z-axis (height)		±2.6 mm 0.10" (F.S.=5.2 mm 0.20")
	X-axis (width)	NEAR side	6.5 mm 0.26"
		Reference distance	7 mm 0.28"
		Far side	7.5 mm 0.30"
Light source	Type		Blue semiconductor laser
	Wavelength		405 nm (visible beam)
	Laser class		Class 2M Laser Product^2 (IEC60825-1, FDA(CDRH) Part 1040.10^3)
	Output		10 mW
Spot size (reference distance)			Approx. 14 mm × 35 µm 0.55" × 0.001378"
Repeatability	Z-axis (height)		0.2 µm 0.000008"^4^5
	X-axis (width)		2.5 µm 0.000099"^4^6
Linearity	Z-axis (height)		±0.1% of F.S.^*7
Profile data interval	X-axis (width)		10 µm 0.0004"
Sampling cycle (trigger interval)			Top speed: 16 µs (high-speed mode), Top speed: 32 µs (advanced function mode)^*8
Temperature characteristics			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529)^*9
	Ambient light		Incandescent lamp: 10,000 lux max.^*10
	Ambient temperature		0 to +45 °C 32 to 113 °F^*11
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, Double amplitude 1.5 mm 0.06", 3 hours in each of the X, Y, and Z directions
	Shock resistance		15 G/6 ms
Material			Aluminum
Weight			Approx. 410 g
^1 The double polarization function cannot be used. ^2 Do not look into the beam directly using any optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Viewing the laser output with an optical instrument may pose an eye hazard. ^3 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^4 This value is from a case in which measurement has been performed with a reference distance with 4,096 times of averaging. ^5 The measurement targets are KEYENCE standard targets. This value is from a case in which the average height of the default setting area has been measured in height mode. All other settings are default. ^6 The measurement target is a pin gauge. This value is from a case in which the position of the intersection between the rounded surface of the pin gauge and the edge level has been measured in position mode. All other settings are default. ^7 The measurement targets are KEYENCE standard targets. The profile data is from a case in which measurement has been performed with 64 times of smoothing and 8 times of averaging. All other settings are default. ^8 For high-speed mode, when the measurement area is at its minimum, binning is ON, image capture mode is set to standard, and parallel image capture is ON. All other settings are default. For advanced function mode, when the measurement area is at its minimum, binning is ON and image capture mode is set to standard. All other settings are default. ^9 This value is from a case in which the sensor head cable (CB-B) or extension cable (CB-BE) has been connected. ^10 This is the illuminance for the light-receiving surface of the sensor head during white paper measurement when light has been shined onto the white paper. ^*11 The sensor head must be mounted on a metal plate for use.

Keyence XG-X2802LJ Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XG-X2800LJ Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LJ-V7001P Keyence

€1.287,95

In stock, 11 units

Specifications

Model		LJ-V7001P
Number of connectable sensors		Max. 2 units
Display	Minimum displayable unit	0.1 µm, 0.00001 mm₂, 0.01°
	Maximum display range	±9999.99 mm 393.7", ±9999.99 mm²
Input terminal block	Laser remote interlock input	No-voltage input^*1
Input terminal block	Encoder input	NPN open collector output/PNP open collector output (5V / 12V / 24V) line driver output
Input terminal block	Trigger input	Voltage input^*2
	Timing 1,2 input
	Auto-zero 1,2 input
Input terminal block	Reset 1, 2 input
Input terminal block	Start measurement/stop input
	Start storage/stop input
	Clear memory input
	Laser OFF input
	Program switch input	Voltage input x 4 inputs^*2
Output terminal block	Analog voltage output	±10 V x 2 outputs, Output impedance: 100 Ω
Output terminal block	OUT comparator output	PNP open collector output x 12 outputs^*3 (Can freely assign 16 OUTs x 3 stage judgment results)
	Strobe output	PNP open collector output^*3
	Disable trigger output
	Memory FULL output
	Ready output
Output terminal block	Error output	PNP open collector output (N.C.)^*3
PC interface	Ethernet	1000BASE-T/100BASE-TX^*4
	USB	USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)^*4
	RS232C	Measurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s)
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
	Current consumption	1.3 A or less when connected to 1 head 1.9 A or less when connected to 2 heads
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 1,500 g
^1 The rating for non-voltage input is up to 1 V for ON voltage and up to 0.6 mA for OFF current ^2 The rating for voltage input is a maximum input voltage of 26.4 V, a minimum ON voltage of 10.8 V, and up to 0.6 mA for OFF current ^3 The rating for PNP open-collector output is up to 50 mA (30 V or less), residual voltage of up to 1 V ^4 DLL and LabVIEW programs are available. Contact your local sales office for details.

Keyence XG-8702T Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87927 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X292F Keyence

€1.856,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X480LJ Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-42279 Keyence

€0,00

Sold Out

Specifications

Model				OP-42279
Overview				Pole-mounting bracket for the 8.4-inch LCD monitor.

Keyence OP-87926 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-EN100U Keyence

€1.275,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-EN100H Keyence

€3.267,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-78042 Keyence

€0,00

Sold Out

Specifications

Model				OP-78042
Type				Dust boot
Applicable product				GT-H22
Number included				1 unit
Note				The dust boot is equipped to the head when shipped

Keyence OP-78041 Keyence

€0,00

Sold Out

Specifications

Model				OP-78041
Type				Dust boot
Applicable product				GT-H10
Number included				1 unit
Note				The dust boot is equipped to the head when shipped

Keyence OP-76876 Keyence

€0,00

Sold Out

Specifications

Model				OP-76876
Overview				Fixing bracket to fix panel amplifier.
Applicable product				GT-75(A)/76(A), FD-MA5, FD-SA5, FD-UA5
Number included				1 pcs.
Material				Mounting bracket: Polyacetal, Front protection cover: Polycarbonate

Keyence GT-H22L Keyence

€439,95

Only 9 units left

Specifications

Model		GT-H22L
Type		Sensor head: Low-stress
Measuring range		22 mm 0.87"
Measuring force	Downward mounting	0.35N^*1
	Side mounting	0.3 N^*1
	Upward mounting	0.25N^*1
Mechanical response		5 Hz (at ambient temperature of 23 °C 73 °F)
Repeatability		8 µm 0.00031" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 Stainless steel, Indicator: Polyarylate, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 135 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range with the response time set to 100 ms.

Keyence GT-H22 Keyence

€479,95

In stock, 15 units

Specifications

Model		GT-H22
Type		Sensor head: Standard
Measuring range		22 mm 0.87"
Measuring force	Downward mounting	1.5 N^*1
	Side mounting	1.4 N^*1
	Upward mounting	1.3 N^*1
Mechanical response		8 Hz (at ambient temperature of 23 °C 73 °F)
Repeatability		8 µm 0.00031" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 Stainless steel, Indicator: Polyarylate, Dust boot: NBR, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 135 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range with the response time set to 100 ms.

Keyence GT-H10L Keyence

€471,95

In stock, 13 units

Specifications

Model		GT-H10L
Type		Sensor head: Low-stress
Measuring range		10 mm 0.39"
Measuring force	Downward mounting	0.3 N^*1
	Side mounting	0.25N^*1
	Upward mounting	0.2 N^*1
Mechanical response		7 Hz (at ambient temperature of 23 °C 73 °F)
Repeatability		3 µm 0.00012" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 Stainless steel, Indicator: Polyarylate, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 115 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range with the response time set to 100 ms.

Keyence GT-H10 Keyence

€407,95

In stock, 11 units

Specifications

Model		GT-H10
Type		Sensor head: Standard
Measuring range		10 mm 0.39"
Measuring force	Downward mounting	1.0 N^*1
	Side mounting	0.9 N^*1
	Upward mounting	0.8 N^*1
Mechanical response		10 Hz (at ambient temperature of 23 °C 73 °F)
Repeatability		3 µm 0.00012" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 Stainless steel, Indicator: Polyarylate, Dust boot: NBR, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 115 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range with the response time set to 100 ms.

Keyence GT-A22L Keyence

€609,95

Only 5 units left

Specifications

Model		GT-A22L
Type		Sensor head: Low-stress Air push models
Measuring range		22 mm 0.87"
Measuring force	Downward mounting	0.35N^*1
	Side mounting	0.3 N^*1
	Upward mounting	0.25N^*1
Repeatability		8 µm 0.00031" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	-
	Pressure resistance	1.0 MPa
	Applied pressure range	0.35 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, Indicator: Polyarylate, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 180 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range at ambient temperature of 23 °C 73 °F with the response time set to 100 ms.

Keyence GT-A22 Keyence

€609,95

In stock, 13 units

Specifications

Model		GT-A22
Type		Sensor head: Air push models
Measuring range		22 mm 0.87"
Measuring force	Downward mounting	1.5 N^*1
	Side mounting	1.4 N^*1
	Upward mounting	1.3 N^*1
Repeatability		8 µm 0.00031" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	IP67^*3
	Pressure resistance	1.0 MPa
	Applied pressure range	0.35 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, Indicator: Polyarylate, Dust boot: NBR, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 180 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range at ambient temperature of 23 °C 73 °F with the response time set to 100 ms. ^*3 To ensure you achieve the rating, connect the air tube to the air outlet joint and prevent foreign matter from entering it through the joint.

Keyence GT-A10L Keyence

€803,95

Only 2 units left

Specifications

Model		GT-A10L
Type		Sensor head: Low-stress Air push models
Measuring range		10 mm 0.39"
Measuring force	Downward mounting	0.3 N^*1
	Side mounting	0.25N^*1
	Upward mounting	0.2 N^*1
Repeatability		3 µm 0.00012" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	-
	Pressure resistance	1.0 MPa
	Applied pressure range	0.35 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, Indicator: Polyarylate, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 150 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range at ambient temperature of 23 °C 73 °F with the response time set to 100 ms.

Keyence GT-A10 Keyence

€736,95

In stock, 12 units

Specifications

Model		GT-A10
Type		Sensor head: Air push models
Measuring range		10 mm 0.39"
Measuring force	Downward mounting	1.0 N^*1
	Side mounting	0.9 N^*1
	Upward mounting	0.8 N^*1
Repeatability		3 µm 0.00012" (at ambient temperature of 23 °C 73 °F)^*2
Environmental resistance	Enclosure rating	IP67^*3
	Pressure resistance	1.0 MPa
	Applied pressure range	0.35 to 0.5 MPa
	Ambient temperature	0 to +55 °C 32 to 131 °F
	Relative humidity	35 to 85 % RH
Material		Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, Indicator: Polyarylate, Dust boot: NBR, Contact: TYPE304 stainless steel, Cable: PVC
Weight		Approx. 150 g (With 2-m 6.6' cable)
^1 Value read near the center of the measuring range ^2 Value read at the center of the measuring range at ambient temperature of 23 °C 73 °F with the response time set to 100 ms. ^*3 To ensure you achieve the rating, connect the air tube to the air outlet joint and prevent foreign matter from entering it through the joint.

Keyence GT-76AP Keyence

€591,95

Only 1 unit left

Specifications

Model		GT-76AP
Type		Amplifier unit
Mounting method		Panel mount
Output		PNP output
Main unit/expansion unit		Expansion unit^*1
Power consumption	Normal	At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less
	Power saving (Eco)	At 12 V: 600 mW (50 mA) or less, At 24 V: 840 mW (35 mA) or less
Display power	Measured value display	6-digit 7-segment LED (red)
	Other displays	2-color 13-level bar LED display (red, green), indicators (red, green)
Display range		-99.999 to 999.999
Display resolution		1 µm 0.000039"
Sampling rate		2,000 times/second
Control input	Timing/preset/bank input	Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more Preset/Bank input: Non-voltage input (relay contact, solid state), input time: 20 ms or more
Response time		hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s
HIGH, GO, LOW output		PNP open collector, 50 mA max. (30 V or less), residual voltage: 1 V or less, N.O./N.C. switchable
Major functions		Preset, Hold, Variable hysteresis, Variable response time, Multiplier setting, Bank function (4 banks), Self-timing, Power save (eco) mode, Application mode, Calibration function, Core alarm
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less^*2
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: Polycarbonate, Cable: PVC
Accessories		Panel mounting bracket, protective front cover, power cable, flat cable for expansion, instruction manual
Weight		Approx. 110 g (: including panel mounting bracket, protective front cover, power cable)
^1 One main unit and nine expansion units (ten in total) can be additionally installed. For additional amplifier unit installation, each output current must be 20 mA or less. ^2 If additional amplifier units are installed, the power supply voltage is 24 VDC.

Previous Page 15 / 30Next