Machine Vision Systems

€0,00

Sold Out

Specifications

Model				GL-VCG03
Type				GC-Link connection cable
Number included				1 pc.
Cable end				Male side: GC-Link connector Female side: M12 connector 5 pin
Length				0.32 m 1.05'
Material				connector 1: PBT GF30% connector 2: PC cable: PVC
Weight				40 g

Keyence OP-88660 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence BL-P2 Keyence

€396,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-2100P Keyence

€3.689,95

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-NC1 Keyence

€971,95

Only 4 units left

Specifications

Model				KV-NC1
Type				Connection conversion unit For terminal block type unit connection
Note				For connecting terminal block type expansion units
Weight				80 g

Keyence XT-024 Keyence

€12.803,95

Only 2 units left

Specifications

Model		XT-024
Type		24‑mm 0.94" type
Image Sensor		Monochrome CMOS image sensor
Display Size (3D)	Type	3072 × 3072 (1536 × 1536) pixels
	XY Data Interval	7.85 µm (15.7 µm)
Display Size (2D)	Type	3072 × 3072 (1536 × 1536) pixels
	XY Data Interval	7.85 µm (15.7 µm)
XYZ Repeatability (σ)		0.5 µm^1^2
Measurement Accuracy	Height Difference	±10 µm^*3
	Width
Shutter Speed		50 µs to 200 ms
Field of View XY	Near Side	24.1 × 24.1 mm 0.95" × 0.95"
	Reference Distance
	Far Side
Z Range (via Reference Distance)		±2 mm ±0.08"
WD (to Reference Plane)		200 mm 7.87"
Light Source		LEDs (red, green and blue) can be set individually across 100 levels
Connected to		XG-X2902/X2802
Display	LED display	Power supply/Operation mode
Ratings	Power voltage	24 VDC ±10%
	Power consumption	3 A
Environmental resistance	Ambient temperature	0°C to 40°C 32 to 104°F
	Relative humidity	85%RH or less (No condensation)
Dimensions		286 × 286 × 286 mm 11.26" × 11.26" × 11.26"
Weight		9.7 kg
^1 3×3 mean filter, using KEYENCE reference workpiece (binning ON) ^2 Repeatability at center of field of view (60 mm 2.36" type: 30 × 30 mm 1.18" × 1.18" center, 24 mm 0.94" type: 12 × 12 mm 0.47" × 0.47" center) ^*3 Using KEYENCE height difference gauge. 60 mm 2.36" types - Height difference: 2 mm 0.08"/Width: 20 mm 0.79", 24 mm 0.94" types - Height difference: 1 mm 0.04"/Width: 10 mm 0.39"

Keyence OP-88201 Keyence

€0,00

Sold Out

Specifications

Model				OP-88201
Type				Convert screw adapter
Number included				1 Piece
Material				Brass nickel plating FKM
Weight				Approx. 35 g

Keyence OP-88832 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-C10BG Keyence

€0,00

Sold Out

Specifications

Model				SV2-C10BG
Type				Motor power cable, Hi-flex robotic cable
Length				10 m 32.8'
Note				for 200 W / 400 W motor

Keyence OP-88771 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-CN3R Keyence

€275,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PI-G70 Keyence

€977,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87440 Keyence

€178,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87321 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VS01S Keyence

€0,00

Sold Out

Specifications

Model				GL-VS01S
Type				Series connection cable
Number included				2 pc.
Cable end				Female side: M12 connector 5 pin Male side: Connector series connection
Length				0.12 m 0.39'
Material				connector 1: PPS GF40%/PBT GF30% connector 2: PVC/Nickel-plated brass cable: PVC
Weight				60 g

Keyence GL-SCG03S Keyence

€0,00

Sold Out

Specifications

Model				GL-SCG03S
Number included				incl. 1 set
Length				0.3 m 1.0'
Note				One set connects to both transmitter and receiver.
Weight				Approx.60 g

Keyence LX2-13T Keyence

€6.773,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-50 Keyence

€0,00

Sold Out

Specifications

Model		FU-50^*1
Optical axis diameter (Standard target to be detected)		ø2.8 mm0.11"
Beam emitting direction		Top
Aperture angle		Approx 6°
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.0
Minimum bend radius		R2 mm0.079" Tough-Flex
Minimum detectable object		Object with a diameter of 0.1 mm0.004"^*2
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F
Weight		Approx. 8 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence OP-89165 Keyence

€0,00

Sold Out

Specifications

Model				OP-89165
Excitation wavelength				620/60 nm
Emission wavelength				700/75 nm
Dichroic mirror wavelength				660 nm

Keyence KV-U7 Keyence

€388,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DRR3 Keyence

€621,95

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV3-M300AS Keyence

€0,00

Sold Out

Specifications

Model				SV3-M300AS
General specifications	Applicable servo amplifier			SV3-300L2, SV3-500L2
	Rated output			SV3-300L2: 2.4k W SV3-500L2: 2.9k W
	Rated torque			SV3-300L2: 15.1 N·m SV3-500L2: 18.6 N·m ^*1
	Instant maximum torque			SV3-300L2: 45.1 N·m SV3-500L2: 54.0 N·m
	Rated current			SV3-300L2: 19.6 Arms SV3-500L2: 23.8 Arms
	Instant maximum current			SV3-300L2: 56 Arms SV3-500L2: 70 Arms
	Rated rotation speed			1,500 min^-1
	High rotation speed			4,000 min^-1
	Torque constant			0.826 N·m/Arms
	Rotor moment of inertia			46.0 ×10^-4 kg·m²
	Rated power rating			SV3-300L2: 49.5 kW/s SV3-500L2: 75.2 kW/s
	Rated angle acceleration			SV3-300L2: 3,280 rad/s² SV3-500L2: 4,040 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		26 bit
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or higher)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20% to 80% RH (No condensation)
		Operating atmosphere		Indoors (No corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2,000 m 6,561.7' or less (reduced ratings at 1,000 m 3,280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8 ft/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4 ft/s² (forward/backward)
		Impact resistance		490 m/s² 1,607.6 ft/s² with servo motor flange surface as reference, 2 times
	Isolation rank			Class F
	Min. insulation resistance			500 VDC 10 MΩ or more with insulation resistance meter
	Isolation voltage tolerance			1,500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part 15 B, ICES-003. Class A
	Allowable load inertia moment			SV3-300L2: 3× SV3-500L2: 5× ^*2
	Approx. weight			13.5 kg 29.76 lb
^1 50 W to 750 W rated torque is continuously allowable with an ambient temperature of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W/100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with an ambient temperature of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 This is the value at 3,000 min-1. At 4,000 min-1, 1 kW becomes 2×, 1.5 kW becomes 2×, 3 kW (with the SV3-300L2 connected) becomes 2.2×, 3 kW (with the SV3-500L2 connected) becomes 4×, and 5 kW becomes 2.4×.

Keyence GP-M010 Keyence

€369,95

Only 10 units left

Specifications

Model			GP-M010
Rated pressure			-14.5 to +145.0 PSI (-0.1 to +1 MPa)
Possible display range			-30.5 to +161.0 PSI (-0.210 to +1.110 MPa)
Zero-cut pressure value			±0.5% of F.S.
Burst pressure			2175 PSI (15 MPa)
Display resolution	kPa		1
	MPa		0.001
	PSI		0.1
	bar		0.01
	kgf/cm²
Fluid type			Gas or liquid that will not corrode the liquid contact part
Type of pressure			Gage pressure
Precision			±1.0% of F.S. or less^*1
Repeatability			±0.3% of F.S. or less^*2
Temperature characteristics			±0.6% of F.S./10°C 50°F
Connection port			G3/4 (Changes to the R male 1/8, R male 1/4, R male 3/8, G female 1/4, NPT male 1/8, and NPT male 1/4 option adapters are available.)
Box rotation angle			Maximum 330°
Medium temperature			-20 to +100°C -4°F to +212°F (no freezing/condensation)^*3
Power voltage			10-30 VDC, Ripple (P-P): 10% max, Class 2 or LPS
Current consumption			50 mA or less (when 24 V: 32 mA or less, when 12 V: 48 mA or less. Not including load)^*4
Display method			4 column, digital LED, red/Vertical inversion display possible
Operation display light			Operation indicator (output 1) (orange), Operation indicator (output 2) (orange)
Hysteresis			During hysteresis mode: variable (Difference between switch-on point and switch-off point is hysteresis) During window mode: fixed (0.5% of F.S.)
Response	Control output		Selectable from 3 to 5000 ms
	Analog output		As above + 2 ms (90% response)
Output	Output 1 control output		NPN/PNP open collector (Selectable), Max. 250 mA (30 V max) Main unit residual voltage 1 V max, N.O./N.C. selectable
	Output 2 replacement type	Control output
		Analog output	4-20 mA, maximum load resistance 500 Ω (When the electric voltage is more than 20 V)^*5
Environmental resistance	Enclosure rating		IP67
	Pressure resistance		4 MPa (40 bar)
	Ambient temperature		-20 to +80 °C -4 to 176 °F (No freezing and no condensation)
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		IEC60068-2-6 20 G (10 to 2000 Hz, 2 hours each in the X, Y, and Z axis)
	Shock resistance		IEC60068-2-27 50G (11 ms, 3 times for each of X, Y and Z direction)
Material properties	Wetted part		Pressure port: SUSXM7, Diaphragm pressure port: Al₂O₃ (Alumina), O ring: FKM
	Other parts		Housing metal portion: SUS304, SUS303, Housing plastic portion: PPSU, Air hole: PTFE, nickel-plated brass.
Applicable cable			M12 connector 4 pin
Weight			Approx. 150 g
^1 This is the value when considering linearity + hysteresis + repeatability in a stable environment of 23°C 73°F. ^2 The repeatability, based on consistent conditions, is the variation in the value that will be displayed. ^3 When the temperature of the piping exceeds 80°C 176°F, do not connect the cable. ^4 Consumption current including output is 0.6 A and under. ^*5 The maximum load resistance R will be the values below in response to the electric voltage E. When 10-23V: R = ｛38 x (E-10) + 128｝ Ω When 23-30V: R = 622 Ω

Keyence EM-030P Keyence

€477,95

Only 4 units left

Specifications

Model		EM-030P
Type		Shielded
Shape		3 mm 0.12" dia Cylindrical.
Detecting distance		0.6 mm 0.02" ±15%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Output		PNP
Control output		PNP: 200 mA (30 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*1
	Current consumption	20 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 36 g (including nuts and 2-m 6.6' cable)
^*1 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.