Machine Vision Systems

Keyence RK-10DM Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-42109 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88089 Keyence

€0,00

Sold Out

Specifications

Model				OP-88089
Type				Ethernet extension cable (M12)
Length				2 m 6.56'
Weight				Approx. 160 g 5.64 oz

Keyence SV3-200L2 Keyence

€0,00

Sold Out

Specifications

Model				SV3-200L2
General specifications	Capacity			2.0 kW
	Input power supply	Voltage/frequency	Main circuit	3-phase (or single-phase^1) 200 to 240 VAC (-15%/+10%), 50/60 Hz, 270 to 324 VDC^2
			Control circuit	Single-phase 200 to 240 VAC (-15%/+10%), 50/60 Hz, 270 to 324 VDC^*2
		Allowable frequency fluctuation	Main circuit/control circuit	±5% max.
		Overvoltage category		III
	Control mode			Three-phase full-wave rectification, IGBT, PWM control, Sine wave current drive system
	Feedback			Serial encoder (absolute) communication, Fully closed control serial communication, Analog feedback
	Operating environment	Operating atmosphere	Enclosure rating	IP20:SV3-005L2/010L2/020L2/040L2/075L2/100L2/150L2 IP10:SV3-200L2/300L2/500L2
			Pollution degree	2 (in an IP54 or higher control panel) However, the product must be used in the following environments: • No corrosive or flammable gases • No exposure to water, oil, or chemicals • No dust
		Operating ambient temperature		-5 to +60°C 23 to 140°F (No freezing) (reduced ratings at +55°C 131°F or higher)
		Storage ambient temperature		-20 to +85°C -4 to +185°F (No freezing)
		Operating/storage ambient temperature		95% RH or less (No condensation)
		Altitude		No more than 2,000 m 6,561.7' above sea level (reduced ratings at 1,000 m 3,280.8' or higher)
		Vibration resistance		4.9 m/s² 16.1 ft/s² (Compliant with JIS C60068-2-6)
		Impact resistance		19.6 m/s² 64.3 ft/s² (Compliant with JIS C60068-2-27)
		Other		No static noise, strong electric or magnetic fields, or radiation
	Applied standard	UL/CSA standards		UL 61800-5-1, CSA 22.2 No. 274
		CE marking	Machinery Directive	EN 61800-5-1, EN 61800-5-2, EN ISO 13849-1:2015 Cat. 3 PLe, EN IEC 62061 Maximum SIL3
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part 15 B, ICES-003. Class A
	Structure	Type		Base mount installation
	Safety function			STO function (STO/EN 61800-5-2)
	Safety function	Safety parameters		SIL 3 / EN 61508, Maximum SIL 3 / EN IEC 62061, PLe (Category 3) / EN ISO 13849-1:2015
		Response time		4 ms(max)
		Input		STO1, STO2: Power module base block signals Internal impedance: 5.1 kΩ Operable voltage range: +24 V, ±20% Max. delay time: 4 ms (Time from when STO1 and STO2 are turned off until motor current is interrupted)
		Output		EDM: Built-in safety circuit status monitoring (fixed output) Max. allowable voltage: 30 VDC Max. allowable current: 50 mA DC Max. voltage drop at ON: 1.5 V Max. delay time: 4 ms (Time from STO1 and STO2 change to EDM change)
	Protection function			Overcurrent, overvoltage, undervoltage, overload, regenerative error, etc.
	Min. insulation resistance			500 VDC 1 MΩ or more with insulation resistance meter
	Insulation withstand voltage			1,500 VAC or more (between primary side and ground) 3,000 VAC or more (between primary and secondary) 350 VAC: between secondary circuit and ground
	Weight			Approx. 2.8 kg 6.17 lb
Power supply/current capacity and power loss	Main circuit power supply			Three-phase 200 V/DC 270 V
	Max. applicable motor capacity			2.0 kW
	Power supply capacity for 1 amplifier			4.0 kVA
	Output current	Continuous		18.5 Arms
		Max.		42 Arms
	Main circuit power loss			Three-phase 200 V: 104.2 W DC 270 V: 82.7 W
	Regenerative resistor power loss			Three-phase 200 V: 30 W DC 270 V: ―
	Control circuit power loss			16 W
	Total power loss			Three-phase 200 V: 120.2 W DC 270 V: 98.7 W
	Rated input current	Main circuit		Three-phase 200 V: 10 Arms DC 270 V: 14 Arms
		Control circuit		0.25 Arms
	Rush current	Main circuit		34 A ^*3
		Control circuit
Performance specifications	Performance	Speed control range		1:5000 (Under conditions where load torque is equal to or less than rated torque)
		Speed fluctuation rate	At load fluctuation	0 to 100% load variation: ±0.01% or less (at rated rotation speed)
			At main circuit voltage change	Rated voltage ±10%: 0% (at rated rotation speed)
			At ambient temperature change	Ambient temperature 0 to +50°C 32 to 122°F: ±0.1% or less (at rated rotation speed)
		Torque control accuracy (reproducibility)		±1%
		Velocity frequency response		3.1 kHz
	Dynamic brake			Operates at main circuit power off, servo alarm, servo off, limit switch detection (LSP/LSN), and forced stop detection (FSTOP)
	Regenerative resistor			Built-in regenerative resistor: Disabled at 50 to 400 W Enabled at 750 W to 5.0 kW External regenerative resistor: OP-84399 (50 W to 1.0 kW) OP-87073 (1.5 kW^*4)
	Display Function	Panel function		7-segment LED Two rotary switches (16 ch)
		Communication status indicator LED		EtherCAT® communication: L/A × 2 EtherCAT® communication status: RUN×1 EtherCAT® error status: ERR×1
	Servo functions	Tuning		Auto-tuning, notch filter, vibration suppression, damping control, model tracking, friction compensation, load inertia moment ratio variation compensation, deviation reduction, low-frequency vibration suppression, etc.
		Monitor		Lifespan prediction, vibration, load factor, power consumption, temperature, etc.
I/O specifications	Sequence input signal	Number of inputs		7 (3 high-speed inputs, 4 general-purpose inputs)
		Max. input voltage		28.8 VDC
		Rated input voltage		24 VDC
		Min. ON voltage		19 VDC
		Max. OFF current/voltage		High-speed input: 0.1 mA, General-purpose input: 0.3 mA
		Common point mode		7 points/1 common (1 terminal) (bidirectional)
		Input time constant		250 μs, 500 μs, 1 ms, 2.5 ms, 5 ms, 10 ms
		Input current		High-speed input: 4.4 mA, General-purpose input: 4.5 mA
		Input impedance		Approx. 5.1 kΩ
		Assignable input signals		All signal assignment, Logic settable forced stop (FSTOP), Probe 1 latch input (PROBE1), Probe 2 latch input (PROBE2), Home switch input (HOME), Forward side limit switch (LSP), Reverse side limit switch (LSN), Forward side torque limit selection (PTL), Reverse side torque limit selection (NTL)
	Sequence output signal	Number of outputs		4
		Output mode		Transistor NPN output
		Rated load		30 VDC/50 mA
		Leakage current when OFF		0.5 mA
		Residual voltage when ON		1.5 VDC or less
		Common point mode		Independent common
		Assignable output signals		Assignment of each signal except ALARM signal, Logic setting available alarm (ALARM), In-position (INPOS), Velocity matching (VCMP), Zero speed detection (ZSP), Ready to run (RDY), Torque limiting (TLM), Velocity limiting (VLM), Electromagnetic brake timing (BRAKE), Warning (WARN), Near positioning (NEAR)
	Analog Feedback Input signal monitor	Max. input voltage		±12 V
		Accuracy		±1% of F.S.
		Resolution		±12 bits
		Input impedance		30 kΩ
	Encoder division pulse output signal	Output mode		A-phase (A+/A-), B-phase B (B+/B-), Z-phase (Z+/Z-): Differential line driver output
		Line driver		SN75ALS174 (T.I.) equivalent
		Output frequency		1.6 Mpps (at 2-phase quadruplication, equivalent to 6.4 MHz)^*5
	Analog monitor output	No. of channels		2 ch
		Output range		±10 V (Linearity effective range: ±8 V)
		Resolution		16 bits
		Conversion precision		±20 mV (typ.)
		Max. allowable load current		±10 mA
		Conversion speed		1.2 ms (typ.)
Communication specifications	EtherCAT® communication	Applicable communication standards		IEC 61158 Type12, IEC 61800-7 CiA402 Drive Profile
		Physical layer		100 BASE-TX(IEEE802.3)
		Cable		Category 5 STP, 2 pair Automatic cable identification is performed by the AUTO MDI/MDI-X function.
		Mailbox		Emergency messages, SDO requests, SDO responses
		Distributed clocks		Free-run, DC mode (switchable), Supported DC cycles (62.5 μs to 4 ms, in 62.5 μs increments)
		Max. distance between stations		50 m 164.0'
	USB communication	Connected device		PC
		Communication standard		USB 2.0–compliant
		Function		Status display, Parameter settings, Tuning, etc.
^1 Single-phase input can only be used with the SV3-005L2, SV3-010L2, SV3-020L2, SV3-040L2, and SV3-075L2. ^2 When using a DC power supply input, set “AC/DC power supply” to “DC”. ^3 The inrush current duration is 20 ms or less when used at the above current levels. ^4 Depending on operating conditions, 2 kW, 3 kW, and 5 kW servo amplifiers can also be used. ^5 The frequency divider ratio can be set as desired with a parameter.

Keyence FU-56 Keyence

€0,00

Sold Out

Specifications

Model		FU-56^*1
Optical axis diameter (Standard target to be detected)		ø0.125 mm0.005"
Fibre unit length		50 cm19.685" cannot be cut
Minimum bend radius		R10 mm0.394"
Minimum detectable object		Object with a diameter of 0.005 mm0.0002"^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 3 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence GL-RP30PM Keyence

€0,00

Sold Out

Specifications

Model				GL-RP30PM
Type				Main Unit Connection Cable
Number included				1 cable
Cable end				Main unit plug (Black) - Loose wires
Length				30 m 98.42'
Material				Main unit connection connector: PBT, Cable: PVC
Note				Brown and blue: 22 AWG (nominal cross section: 0.34 mm²), other: 26 AWG (nominal cross section: 0.14 mm²)
Weight				Approx. 1440 g

Keyence MD-H9800W Keyence

€4.655,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-84254 Keyence

€0,00

Sold Out

Specifications

Model				OP-84254
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V88HM, SL-V44LM
Number included				1 pcs.
Length				1,764 mm 69.45"
Material				Translucent plastic: Polycarbonate Black plastic: ABS

Keyence OP-66831 Keyence

€0,00

Sold Out

Specifications

Model				OP-66831
Overview				Specialised close-up ring for the compact camera (ø17).
Applicable product				XG-S200C, XG-S200M, CV-S200C, CV-S200M

Keyence EH-114S Keyence

€118,95

In stock, 44 units

Sensor Head, Shielded Type, M14, Stainless Steel Tube

Keyence GC-A16 Keyence

€651,95

Only 2 units left

Specifications

Model		GC-A16
Input/output points	Safety inputs	-
	Safety outputs
	Safety relay output
	AUX outputs	16
	Test outputs	-
Safety input specifications	Input device
	Input type
	ON level (voltage/current)
	OFF level (voltage/current)
	Short-circuit current
	Protection circuit
	Maximum cable length
Safety output specifications	Output type
	Maximum load current
	Residual voltage (during ON)
	Leakage current (during OFF)
	Maximum capacitive load
	Load wiring resistance
	Protection circuit
	Maximum cable length
Safety relay output specifications	Output type
	Rated load (resistance load)
	Rated load (inductive load)
	Relay output mechanical life
	Maximum cable length
	B10d
Test output specifications	Output type
	Maximum load current
	Protection circuit
	Maximum cable length
AUX output specifications	Output type	PNP transistor output (DC-13, Type 0.1, Protected outputs)^*1
	Maximum load current	100 mA
	Residual voltage (during ON)	Max. 2.0 V
	Leakage current (during OFF)	Max. 0.5 mA
	Protection circuit	Overcurrent protection circuit, reverse connection protection circuit
	Maximum cable length	Max. 30 m 98.4'
Applicable standards	EMC	EMS: IEC 61131-2/-6, EN61131-2/-6,EMI: IEC 61131-2, FCC Part15B Class A, ICES-003, Class A
	Safety	IEC 61508, EN 61508 SIL3, IEC62061 SIL CL3, ISO/EN 13849-1:2015 Cat. 4, PL e, UL1998
Dimensions		22.2×95×90 mm 0.87"×3.74"×3.54" (W×D×H)
Power supply	Power voltage	-
	Power consumption	Max. 70 mA
Environmental resistance	Ambient temperature	−10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	5 to 85% (No condensation)
	Storage temperature	-25 to +70 °C -13 to 158 °F (No freezing)
	Operating altitude	Max. 2000 m 6561.7'
	Overvoltage category	II
	Pollution degree	2
	Vibration resistance	Frequency: 5 to 9 Hz, Half amplitude: 3.5 mm 0.14" Frequency: 9 to 150 Hz, Acceleration: 10 m/s² 10 times each in X, Y, Z directions
	Shock resistance	Acceleration: 150 m/s², Operating time: 11 ms, 3 times each in X, Y, Z directions
Material		Polycarbonate
Weight		Approx. 130 g
^*1 Paragraph 6.4.6 Temporary overload of IEC 61131-2 supports up to 1.2 times the maximum load current.

Keyence MD-T1010W Keyence

€0,00

Sold Out

Specifications

Model		MD-T1010W
Type		Main unit (head)
PC software		MB-H2D3-DVD Supported OS^1: Windows 10/7/Vista (SP1 or higher)/XP (SP3 or higher), Supported languages: Japanese/English/Chinese^2/German
PC software (Logo designer)		MB-HLD Supported OS : Windows 7/Vista (SP1 or higher) /XP (SP3 or higher), Supported languages: Japanese/English/Chinese^*2/German
Console		MC-P1
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10 ^*3)
	Wavelength	532 nm
	Output	4W (at 30kHz)
Guide laser		Semiconductor laser, Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10 ^*3), Wavelength 655nm, Output 1.0mW
Marking area		80 x 80 mm 3.15" x 3.15"
Standard working distance		189 mm 7.44"
Q-switch frequency		1 to 400kHz
Spot variable width		±5 mm ±0.20"
Marking resolution		2 µm 0.08 Mil
Scan speed		Max. 12000 mm/s
Character type	Font	Original fonts (numbers, alphabet, Katakana, Hiragana, Kanji)/user fonts/True Type fonts/ Dot font (SEMI single-density/SEMI double-density)
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128
	2D code	QR code /Micro QRcode/DataMatrix (ECC200)/GS1 DataMatrix
	GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/ GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image	Custom character font/logo data DXF/BMP/JPEG/PNG/TIF
	Machinery operation	Fixed point/straight line/dashed line/circle/oval
	Trimming	Single cut/L-shaped cut/multi-plunge/serpentine/free line/specify end point/relative shift
Marking conditions	Workpiece style	Stationary marking
	Character size (marking height/width)	0.01 to 80 mm 0.0004" to 3.15"
	No. of registered programs	Max. 2000 programs
	No. of program blocks	256 blocks
I/O (Input/output)		Terminal block I/O/MIL connector I/O
Interface		RS-232C/RS-422A/USB2.0^*4 /Ethernet (100BASE-TX/10BASE-T)
CF memory card slot		Compact flash memory card^*5 only
Head installation direction		Up and down (vertical)
Head cable length		5 m 16.4'
Cooling method		Air cooling, thermoelectric cooling
Rating	Power voltage	100 to 120 VAC/200 to 240 VAC, 50/60 Hz
	Power consumption	550 VA max.
Environmental resistance	Ambient temperature for storage	-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature	+15 to +35 °C 59 to 95 °F
	Relative humidity	30 to 85 % RH (No condensation)
Weight		Marking head unit: 35 kg Console: 2.0 kg
^1 For Windows 10/7/Vista, the 32-bit or 64-bit versions are supported, for XP only the 32-bit version is supported. Windows is a registered trademark of Microsoft Corporation, U.S.A. ^2 For Chinese, simplified Chinese display is supported and Chinese input is not supported. ^3 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^4 Port dedicated for PC software ^*5 SanDisk cards are recommended.

Keyence NR-A2 Keyence

€383,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LM-H1EA Keyence

€0,00

Sold Out

Specifications

Model				LM-H1EA
Supported OS				Windows 10 (64-bit version) Windows 11
Required free space on hard disk				30 GB or more

Keyence OP-42281 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-C16XTD Keyence

€492,95

Only 6 units left

Specifications

Model		KV-C16XTD
Type		I/O unit
External connection method		Connector (MIL standard)^*1
Input	Number of inputs	16 points
	Input mode	24 VDC mode, 5 VDC mode
	Maximum input voltage	26.4 VDC
	Rated input voltage	24 VDC mode:24 VDC, 5.3 mA , 5 VDC mode: 5 VDC, 1 mA
	Minimum ON voltage	24 VDC mode:19 V , 5 VDC mode: 3.5 V
	Maximum OFF current	24 VDC mode: 1.5 mA
	Maximum OFF voltage	5 VDC mode: 1.5 V
	Common method	16 points/1 common (1 terminal)
	Input time constant	25 μs/300 μs^*2/1 ms/10 ms
	Input impedance	4.3 kΩ
Output	Number of outputs	16 points
	Output mode	MOSFET (sink) (with overcurrent protection function)
	Rated load	30 VDC, 0.2 A
	Leakage current at OFF	100 μA or less
	Residual voltage at ON	0.5 VDC or less
	Common method	16 points/1 common (1 terminal)
	Operation time	OFF to ON:100 μs or less ,ON to OFF: 300 μs or less
Internal current consumption		40 mA or less
Weight		Approx. 110 g
^1 Connectors for connector-type I/O units are not included XC Series Terminal Block Conversion Unit is available. ^2 Configurable only when KV-8000A/7500/7300/5500/5000/3000 is connected. Cannot be selected when connected to KV-1000/700.

Keyence SV-E20A Keyence

€0,00

Sold Out

Specifications

Model				SV-E20A
Type				Encoder cable, Standard
Length				20 m 65.6'
Note				for 1 k to 5 kW motor

Keyence OP-88643 Keyence

€0,00

Sold Out

Specifications

Model				OP-88643
Type				Polarizing filter (monochrome)
Weight				Approx. 3 g

Keyence BL-180 Keyence

€616,95

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-80929 Keyence

€426,95

Only 3 units left

Buy the Keyence OP-80929 HMI Operator Panel - an industrial touchscreen interface for machine monitoring and control. Features rugged industrial-grade display, configurable visualization, PLC connectivity, and intuitive operator interface. The Keyence OP-80929 is suited for factory automation, process control, and packaging. Direct replacement for existing installations.

Keyence GS-11N5 Keyence

€621,95

Only 5 units left

Specifications

Model			GS-11N5
Type			Standard type
Operating distance	Front	Sao(OFF→ON)	10 mm 0.39"
		Sar(ON→OFF)	18 mm 0.71"
	Side	Sao(OFF→ON)	6 mm 0.24"
		Sar(ON→OFF)	14 mm 0.55"
Response time	Detection	Detect→Not detect	20 ms + 2 ms × (number of units cascaded -1)^*1
		Not detect→Detect	30 ms + 25 ms × (number of units cascaded -1)^*1
Door operation	Acceptable operation frequency		3 Hz
Cascading	Standard		Max. 30 units
	Using Y-shaped connector		-
Control output (OSSD output)	Output		Transistor outputs × 2
	Max. load current		Max. 100 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
	OFF state voltage		Max 2.0 V (with a cable length of 5 m 16.40')
	Leakage current		Max. 500 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max.2.5Ω
AUX (Non-safety related output)	Output		Transistor output
	Number of outputs		1
	Max. load current		50 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
External input (Short-circuit current)	Safety input		Approx. 1.5 mA × 2
	Reset/EDM input		-
Applicable Standards (Safety)			EN 61508, IEC 61508 (SIL3) EN 6206, IEC62061 (SIL CL3) EN ISO13849-1: 2015 (PLe, Category 4) EN ISO14119 (Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
Protection circuit			Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage		24 V DC ±20 % (Ripple P-P 10 % or less, Class2)
	Power consumption		0.8 W
Environmental resistance	Enclosure rating		IP65/67(IEC60529), IP69K(ISO20653) (TÜV SÜD certified) Enclosure Type 3/4X/12/13 (NEMA250)
	Operating ambient temperature		-20°C to +55°C -4°F to 131°F (No freezing)
	Operating relative humidity		5% to 95%RH
	Storage temperature		-25°C to +70°C -13°F to 158°F (No freezing)^*2
	Storage relative humidity		5% to 95%RH
	Vibration resistance		10 to 55 Hz, Double amplitude 3.0 mm 0.12", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance		30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Sensor main unit	Case	Zinc die cast (Nickel chrome plating), PBT, PAR
		Cable	PVC
	Actuator	Case	SUS430, SUS304, PBT
Weight			Approx. 270 g
^1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). ^2 When stored for a long period of time, please store it at a temperature of 55°C 131°F or lower.