Machine Vision Systems

€604,95

Only 10 units left

Specifications

Model			GL-VM28HP
Beam axis spacing/Lens diameter			20 mm 0.79": ø5 ø0.197"
Number of beam axes			28
Total length			560 mm 22.05"
Detection height			540 mm 21.26"
Protection height			585 mm 23.03"
Minimum detectable object size			ø25 mm ø0.98" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.0
		OFF→ON	48.6 ^*3
		All blocked→ON	55.4 ^*4
	With channel A or B	ON→OFF	13.7
		OFF→ON	60.8 ^*3
		All blocked→ON	79.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	87 ^*5
		Receiver	98 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	53 ^*5
		Receiver	59 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		370 g 13.06 oz
	Receiver		380 g 13.41 oz
	Total		750 g 26.47 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence CL-L015N Keyence

€4.918,95

Only 3 units left

Specifications

Model			CL-L015N
Type			Optical unit
Head			CL-L015 ^*1
Reference distance			15 mm 0.59"
Reference measurement range	Measurement range		±1.3 mm ±0.05"
	Linearity		±0.49 μm ±0.000019" ^*2
High precision measurement range	Measurement range		±0.5 mm ±0.02"
	Linearity		±0.41 μm ±0.000016" ^*2
Resolution			0.25 μm 0.000010" ^*3
Spot diameter			ø300 μm ø0.0118"
Laser class	Optical unit		Class I
Sampling cycle			100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head	IP67 (IEC60529)
	Ambient light		Target surface illuminance: 30000 lux (Incandescent lamp)
	Ambient temperature		0 to 50°C 32 to 122°F
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance	Head	10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance		15 G, 6 ms
Temperature characteristic	Head		0.005% of F.S./°C
	Optical unit		0.015% of F.S./°C
Material	Head		Front: SUS, Rear: Aluminum
	Optical unit		Polycarbonate
Weight	Head		Approx. 180 g 6.35 oz
	Optical unit		Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface). ^*3 Value measured using 16,384 average cycles with KEYENCE reference workpiece (mirrored surface).

Keyence FS-N41P Keyence

€197,95

In stock, 24 units

Specifications

Model		FS-N41P
Type		Cable
Output		PNP
Main unit/expansion unit		Main unit
Response time		23 µs (S-HSPD^1) /50 µs (HSPD^2) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) /64 ms (TERA)
Number of control outputs		1
Number of external inputs		―
Light source LED		Transmitter side: Red, four-element LED (wavelength: 660 nm)
Control output		Open-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) /20 mA or less (when used as an expansion unit) Residual voltage: 1.6 V or less (output current: 10 mA or less) /2.2 V or less (output current: 10 to 100 mA)
External input		Input time: 2 ms (ON) /20 ms (OFF) or longer^*3
Unit expansion		Up to 16 units (17 units connected in total including the main unit) . However, each dual output type will be treated as two expansion units.
Protection circuit		Protection against reverse power connection, output overcurrent, output surge, and reverse output connection
Mutual interference prevention		S-HSPD/HSPD: 0 units, FINE: 4 units, TURBO/SUPER/ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.)
Power supply	Power voltage	10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS^*4
	Power consumption	During normal operation: 910 mW or less (36 mA or less at 24 V/65 mA or less at 12 V) ECO ON: 840 mW or less (33 mA or less at 24 V/60 mA or less at 12 V) ECO FULL: 750 mW or less (30 mA or less at 24 V/52 mA or less at 12 V)^*5
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less
	Ambient temperature	-20 °C -4 °F to +55 °C +131 °F (no freezing)^*6
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
	Shock resistance	500 m/s²; 3 times each for X, Y, and Z axes
Case material		Main unit and cover: polycarbonate
Weight		Approx. 78 g
^1 Restrictions when S-HSPD is selected Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode. Output timer, Limit Detection, and Display Gain cannot be used. FULL cannot be selected for the ECO function. ^2 Restrictions when HSPD is selected Display Gain cannot be used. ^3 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected. ^4 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher. ^5 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max. ^6 When expanded by 1 to 2 units: -20°C -4°F to +55°C +131°F. When expanded by 3 to 10 units: -20°C -4°F to +50°C +122°F. When expanded by 11 to 16 units: -20°C -4°F to +45°C +113°F. When using 2 outputs, 1 unit is counted as 2 units. The prescribed values for the ambient temperature assume that the sensor amplifi er has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Keyence OP-73880 Keyence

€105,95

Only 9 units left

Specifications

Model				OP-73880
Overview				Fixing bracket to fix DIN amplifier.
Applicable product				FS-V30/FS-N10/LV-N10/PS-N10 Series
Material				Polycarbonate

Keyence OP-84388 Keyence

€484,95

Only 3 units left

Specifications

Model				OP-84388
Overview				Relay substrate unit for the replacement of dedicated SL-T11R for the relay terminal SL-V.
Applicable product				SL-T11R

Keyence CB-B3 Keyence

€189,95

In stock, 12 units

Specifications

Model		CB-B3^*1
Type		Head cable
Cable min. bending R		22 mm 0.87"
Cable length		3 m 9.84'
Environmental resistance	Enclosure rating	IP67 (IEC60529)^*2
Material		PVC
Weight		Approx. 250 g
^1 Regarding cable extension between the head and controller: Up to 2 cables can be connected with the CB-BxxE, and these cables should be kept to a total length of 30 m 98.4' or less. ^2 This value is from a case in which the sensor head has been connected. However, the controller side connector is not included.

Keyence FD-XC8R3 Keyence

€462,95

Only 5 units left

Specifications

Model				FD-XC8R3
Supported diameter				Outer diameter of pipe: ø 8 0.31 " Attachable range: ø 7.5 to 8.5 0.27 " to 0.33 "
Weight				Approx. 60 g

Keyence OP-88305 Keyence

€189,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FW-H10R Keyence

€300,95

Only 5 units left

Specifications

Model		FW-H10R
Type		Long range
Detecting area		150 to 1000 mm 5.9" to 39.4"^*1
Response speed		1,000 ms
Temperature characteristics		0.06% of F.S./°C^*2
Indicator lamp		Operation indicator (orange) x1 (Turns on when the target is within the detecting range.)
Dimensions		M18 x P1, Length= 104 mm 4.09"
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +70 °C -13 to 158 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material		Brass-nickel plating, PBT, Polyurethane, Polyamide resin
Accessories		M18 nut: 2, Head cable: 2 m 6.6', Standard Mounting Bracket (FW-B01)
Weight		Approx. 106 g
^1 Less stable zones of approx. 2% of F.S. exist at both ends of the detecting range. ^2 The errors for the indicated value at 25°C 77°F.

Keyence GL-R1UB Keyence

€296,95

In stock, 12 units

Specifications

Model				GL-R1UB
Type				Interface Unit
Overview				Optional accessory that is necessary for performing GL-R settings and monitoring with a PC.
Applicable product				GL-R Series
Number included				1 unit
Material				Polycarbonate
Note				The USB cable to use in connecting the interface unit and a PC is not included. Use an A to miniB type USB cable (sold separately).
Weight				Approx. 10 g

Keyence GS-MA5M Keyence

€168,95

Only 10 units left

Specifications

Model				GS-MA5M
Type				Coding level: Low
Applicable model				Standard model GS-M5 Series

Keyence NQ-MP8L Keyence

€555,95

Only 5 units left

Specifications

Model		NQ-MP8L
Network Specifications	Compatible Networks	EtherNet/IP™, PROFINET, Modbus/TCP
	Communication Speed	10 Mbps/100 Mbps
	Connector	M12 4-pin female D-code
Power Supply Specifications	Connector Type	Power supply port IN: M12 5-pin male L-code Power supply port OUT: M12 5-pin female L-code
	Power Voltage	18 to 30 VDC (During IO-Link communication: 20.4 V to 28.8 V)
	Allowable Current	V1 and V2: max. 9 A each V1 and V2: 11 A in total
	Current Consumption	V1: max. 180 mA V2: max. 90 mA
Sensor Connection Specifications	Connector Type	M12 5-pin female A-code
	V1 Power Supply Capacity	Ports 1 and 5: Each port max. 4 A, with short-circuit protection Ports 2 to 4, 6 to 8: Each port max. 2 A, with short-circuit protection
	V2 Power Supply Capacity	Ports 5 and 6: Each port max. 4 A, with short-circuit protection Ports 7 and 8: Each port max. 2 A, with short-circuit protection
IO-Link Specifications	Number of Connectable Devices	8
	Compliant Standards	Ver1.1
	Transmission Speed	COM1: 4.8 kbps COM2: 38.4 kbps COM3: 230.4 kbps
	Port type	Ports 1 to 4: Class A Ports 5 to 8: Class B^*1
	Process Data Size	Input: Max. 32 bytes/Output: Max. 32 bytes
Digital Input (DI) Specifications	Number of Inputs	Max. 12 (when using DI mode)
	Input Type	PNP
	ON Voltage/ON Current	11 V or higher/2 mA or higher
	OFF Voltage/OFF Current	Less than 5 V/less than 1.5 mA
	Input Current	Pin 2: approx. 7 mA, Pin 4: approx. 12 mA
Digital Output (DO) Specifications	Number of Outputs	Max. 4
	Output Type	PNP
	Maximum Load Current	Each port max. 2 A
	Short-Circuit Protection Circuit	Yes
	Leakage Current	0.1 mA or lower
	Residual Voltage	1 V or lower
Environmental resistance	Enclosure rating	IP65/IP67/IP69K
	Ambient temperature	-40°C to +70°C -40°F to +158°F (no freezing)
	Vibration resistance	5 to 150 Hz/20 G/10 sweeps each in X, Y, and Z axes
	Shock resistance	15 G/11 ms/3 times each in X, Y, and Z axes
Case Material		Housing: PA6-GF30 IP address settings switch cover: PEI Connector: SUS303
Weight		Approx. 530 g 18.69 oz
^*1 When using Class B, V1 and V2 each require a power supply.

Keyence SZ-04M Keyence

€2.258,95

Only 5 units left

Specifications

Model			SZ-04M
Type			Multi-function type
Detection capability	Minimum detectable object size		Diameter 30 mm 1.18"/40 mm 1.58", 50 mm 1.97", 70 mm 2.76", 150 mm 5.91" (depends on the setting) Reflectance 1.8% min., Speed 1.6 m/s 5.25 ft/s max.
	Detectable angle		270° (-45° to 225°)
	Response time (ON to OFF)	General scan cycle (Scan cycle A)	60 ms (2 scans) to 480 ms (16 scans)
		Specific scan cycle (Scan cycle B)	66 ms (2 scans) to 528 ms (16 scans)
	Response time (OFF to ON)	General scan cycle (Scan cycle A)	Response time of ON to OFF +125 ms
		Specific scan cycle (Scan cycle B)
	Max. protection zone	Minimum detectable object size: 70 mm 2.76"/150 mm 5.91"	4.2 m 13.78' (-5° to 185°), 2.8 m 9.19' (-45° to -5°, 185° to 225°)
		Minimum detectable object size: 50 mm 1.97"	3.0 m 9.84' (-5° to 185°), 2.0 m 6.56' (-45° to -5°, 185° to 225°)
		Minimum detectable object size: 40 mm 1.58"	2.4 m 7.87' (-5° to 185°), 1.6 m 5.25' (-45° to -5°, 185° to 225°)
		Minimum detectable object size: 30 mm 1.18"	1.8 m 5.91' (-5° to 185°), 1.2 m 3.94' (-45° to -5°, 185° to 225°)
	Max. warning zone (non safety related)	Minimum detectable object size: 70 mm 2.76"/150 mm 5.91"	10.0 m 32.18' (-5° to 185°), 7.0 m 22.97' (-45° to -5°, 185° to 225°)^*1
		Minimum detectable object size: 50 mm 1.97"	7.5 m 24.61' (-5° to 185°), 5.0 m 16.4' (-45° to -5°, 185° to 225°)^*1
		Minimum detectable object size: 40 mm 1.58"	6.0 m 19.69' (-5° to 185°), 4.0 m 13.12' (-45° to -5°, 185° to 225°)^*1
		Minimum detectable object size: 30 mm 1.18"	4.5 m 14.76' (-5° to 185°), 3.0 m 9.84' (-45° to -5°, 185° to 225°)^*1
	Additional safety distance		100 mm 3.94"^*2
Light source	Type, wavelength		Infrared laser diode, 905 nm
	Laser class		Class 1 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10 ^*3)
OSSD output	Output		PNP or NPN (Selectable according to the connector cable) 4 outputs
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 5 m 16.4')
	OFF-state voltage		Max. 2.0 V (with a cable length of 5 m 16.4')
	Leakage current		Max. 1 mA^*5
	Max. capacitive load		2.2 µF (with a load resistance of 100Ω)
	Load wiring resistance		Max. 2.5Ω^*6
Input (safety-related)	Input resistance		4.4 kΩ (for Input 1, 3, 4, and 5) 2.2 kΩ (for Input 2 and 6)
Non safety-related output (AUX output)	Output		PNP/NPN totem pole output 6 outputs
	Max. load current		50 mA
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 5 m 16.4')
Muting lamp output	(AUX6 output can be assigned for the muting lamp output)		Can be connected to the incandescent lamp (24 V DC, 1 to 5.5 W) and LED lamp (load current 10 to 230 mA)
Cable length			30 m 98.43' or less ^*7
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL 61496-1
		EMI	EN55011 Class A, FCC Part15B Class A
	Safety		IEC61496-1, EN61496-1, UL 61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR) IEC61508, EN61508, IEC62061, EN62061 (SIL2), EN ISO13849-1:2015 (PL d, Category 3) UL508, UL1998
Rating	Power voltage		When using a converter power supply: 24 VDC ±10 %, Ripple (P-P) 10 % or less When using a battery: 24 VDC +20 %/-30 %
	Power consumption		Max. 9.5 W (without load) Max. 50 W (with load)
Environmental resistance	Enclosure rating		IP65 (IEC60529)^*8
	Ambient light		Incandescent lamp: 1,500 lux or less^*9
	Operating ambient temperature		-10 to +50 °C 14 to 122 °F (No freezing)
	Operating relative humidity		35 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		35 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum die casting, SPHC (Bottom)
	Window		Polycarbonate
Weight			Approx. 1.6 kg
^1 20% or more reflectance is necessary for the minimum detectable object in the warning zone. ^2 If there is a high reflective background within 1.5 m 4.921' from the boundary of the protection zone, 200 mm 7.87" must be added as supplementary necessary distance to the protection zone in case of calculation of the minimum safety distance. ^3 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^4 For the load current calculation of the OSSD output and the AUX output, make sure it is 1.5 A or less when using converter power supply (or 1.0 A or less when the cable length is 25 m 82.02' or more), and 1.0 A or less when using a battery (or 0.5 A or less when the cable length is 5 m 16.40' or more) ^5 This also takes into account the situations when power is either off or disconnected. ^6 The wiring resistance between the OSSD output and the connected equipment (excluding the resistance of the cable) must be 2.5 Ω or less to ensure operation. However, it must be 1.0 Ω or less if the load current is 300 mA or more. ^7 It must be 10 m 32.81' or less if the power is supplied by battery. ^8 When the setting cover is open, or the connector cable is not connected, the IP65 certification cannot be met. In addition, the SZ-16D doesn't fulfill the requirements of IP65 degree of protection with the connector cable for the RS-422A communication unattached.. ^*9 The SZ should not be installed so as to have light interference within ±5° to the detection plane.

Keyence GS-71P5 Keyence

€265,95

Only 5 units left

Specifications

Model			GS-71P5
Lock type			Power-to-lock type
Type			Standard type
Response time	Lock	Lock→Unlock	320 ms^1^2
		Unlock→Lock	220 ms^1^2^*3
Lock	Locking force (Fzh)		Min. 2,000 N
	Alignment tolerance of lock		±2 mm ±0.08"
	Mechanical life-span		1 million cycles or more (with door operation speed of 1 m/s)
	Acceptable operation frequency		1 Hz^*4
	Door radius		Min. 250 mm 9.84"
	Auxiliary release		Front, back ^*5
Cascading			Max. 25 units
Control output (OSSD output)	Output		Transistor outputs × 2
	Max. load current		Max. 150 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
	OFF state voltage		Max 2.0 V (with a cable length of 5 m 16.40')
	Leakage current		Max. 0.5 mA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
AUX (Non-safety related output)	Output		Transistor output
	Number of outputs		1
	Max. load current		50 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
External input (Short-circuit current)	Safety input		Approx.1.5 mA × 2
	Reset/EDM input		-
	Lock control input		Approx. 2.5 mA × 1
	OSSD operation switching input		-
Applicable Standards (Safety)			EN 61508, IEC 61508(SIL2/SIL3) EN 62061, IEC62061(SIL CL2/SIL CL3) EN ISO13849-1: 2015(PLd, Category 2/PLe, Category 4) EN ISO14119(Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
Protection circuit			Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage		24 V DC ±20 % (Ripple P-P 10 % or less, Class2)
	Power consumption		3.4 W^*6
Environmental resistance	Enclosure rating		IP65/67(IEC60529), IP69K(ISO 20653) (TÜV SÜD certified), Enclosure Type 3/4X/12/13 (NEMA250)
	Operating ambient temperature		-20°C to +55C° -4°F to 131°F (No freezing)
	Operating relative humidity		5% to 95%RH
	Storage temperature		-25°C to +70°C -13°F to 158°F (No freezing)^*7
	Storage relative humidity		5% to 95%RH
	Vibration resistance		10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance		30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Sensor main unit	Case	SUS304, PPS, PBT, PAR, PA66, NBR
		Lock	Aluminum alloy, Zinc die cast (Nickel chrome plating)
		Cable	PVC
	Actuator	Case	PPS, PBT, NBR
		Lock	Aluminum alloy, SUS303
Weight			Approx. 560 g
^1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). ^2 If the OSSD operation is open/close link mode, Detect→ Not detect: 20 ms + 2 ms × (number of units cascaded -1), Not detect → Detect: 30 ms + 25 ms × (number of units cascaded -1) ^3 430 ms when locked at the same time the actuator is detected. ^4 Acceptable door operation frequency is 3 Hz if the OSSD operation is open/close link mode. In that case, operation distance is Sao(OFF→ ON) = 3 mm 0.12", Sar(OFF→ ON) = 10.5 mm 0.41". ^5 Do not apply excessive torque (0.45N·m or higher). ^6 Power consumption temporarily increases (Max. 10.5 W, Approx. 0.2 s) when the lock control input(s) is(are) turned ON. After that, current consumption will be within the specification. ^*7 When stored for a long period of time, please store it at a temperature of 55°C 131°F or lower.

Keyence FU-69X Keyence

€125,95

Only 7 units left

Specifications

Model		FU-69X^*1
Size		M3
Fibre unit length		1 m39.37" cannot be cut
Minimum bend radius		R4 mm0.157" high-flex
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 3 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence GS-10PC Keyence

€306,95

Only 8 units left

Specifications

Model			GS-10PC
Type			Simple function type
Operating distance	Front	Sao(OFF→ON)	10 mm 0.39"
		Sar(ON→OFF)	18 mm 0.71"
	Side	Sao(OFF→ON)	6 mm 0.24"
		Sar(ON→OFF)	14 mm 0.55"
Response time	Detection	Detect→Not detect	20 ms + 2 ms × (number of units cascaded -1)^*1
		Not detect→Detect	30 ms + 25 ms × (number of units cascaded -1)^*1
Door operation	Acceptable operation frequency		3 Hz
Cascading	Standard		-
	Using Y-shaped connector
Control output (OSSD output)	Output		Transistor outputs × 2
	Max. load current		Max. 150 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
	OFF state voltage		Max 2.0 V (with a cable length of 5 m 16.40')
	Leakage current		Max. 500 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max.2.5Ω
AUX (Non-safety related output)	Output		Transistor output
	Number of outputs		1
	Max. load current		50 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
External input (Short-circuit current)	Safety input		-
	Reset/EDM input
Applicable Standards (Safety)			EN 61508, IEC 61508 (SIL3) EN 6206, IEC62061 (SIL CL3) EN ISO13849-1: 2015 (PLe, Category 4) EN ISO14119 (Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
Protection circuit			Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage		24 V DC ±20 % (Ripple P-P 10 % or less, Class2)
	Power consumption		0.8 W
Environmental resistance	Enclosure rating		IP65/67(IEC60529), IP69K(ISO20653) (TÜV SÜD certified) Enclosure Type 3/4X/12/13 (NEMA250)
	Operating ambient temperature		-20°C to +55°C -4°F to 131°F (No freezing)
	Operating relative humidity		5% to 95%RH
	Storage temperature		-25°C to +70°C -13°F to 158°F (No freezing)^*2
	Storage relative humidity		5% to 95%RH
	Vibration resistance		10 to 55 Hz, Double amplitude 3.0 mm 0.12", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance		30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Sensor main unit	Case	Zinc die cast (Nickel chrome plating), PBT, PAR
		Cable	PVC
	Actuator	Case	SUS430, SUS304, PBT
Weight			Approx. 80 g
^1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). ^2 When stored for a long period of time, please store it at a temperature of 55°C 131°F or lower.

Keyence GS-ML51P Keyence

€399,95

Only 6 units left

Specifications

Model		GS-ML51P
Type		For sliding door M12 Connector Standard
Holding force when locked		500N
Holding force when unlocked		Approx. 30N ^*1
Cascading		Max. 20 units
Operating distance	Sao(OFF→ON)	0.1 mm 0.004" ^*2
	Sar(ON → OFF)	15 mm 0.59" ^*2
Response time (ms)	Lock→Unlock	250 ms ^*3
	Unlock→Lock
	Detect→ Not detect	20 ms + 2 ms × (number of cascaded unit -1) ^*3
	Not detect→ Detect	300 ms + 25 ms × (number of cascaded unit -1) ^*3
Control output (OSSD output)	Output	Transistor outputs × 2
	Max. load current	150 mA
	Residual voltage (during ON)	Max. 2.5 V (with a cable length of 5 m 16.4') Max. 3.5 V (with a cable length of 31 m 101.7')
	OFF state voltage	Max. 2.0 V (with a cable length of 5 m 16.4') Max. 3.0 V (with a cable length of 31 m 101.7')
	Leakage current	Max. 0.5 mA
	Max. capacitive load	0.8 μF
	Load wiring resistance	Max. 2.5Ω
AUX (Non-safety related output)	Output	Transistor output (Only advanced function type has two outputs.)
	Max. load current	50 mA
	Residual voltage (during ON)	Max. 2.5 V(with a cable of 5 m 16.4') Max. 3.5 V(with a cable of 31 m 101.7')
External input (Short-circuit current)	Safety input	Approx. 1.5 mA × 2
	Reset/EDM input	Approx. 5 mA (For advanced function type only)
	Lock control input	Approx. 2.5 mA
	OSSD operation switching input	Approx. 2.5 mA (For advanced function type only)
Applicable Standards (Safety)		EN61508, IEC61508(SIL3), EN ISO13849-1:2015(PL e, Category 4), EN ISO14119(Type4), IEC60947-5-3, EN60947-5-3, UL 60947-5-2
Protection circuit		Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage	24 V DC ±20 % (Ripple P-P 10% or less, Class2)
	Power consumption	5 W
Environmental resistance	Enclosure rating	IP65/67 (IEC60529)
	Operating ambient temperature	-20 to 55°C -4 to 131°F (No freezing)
	Operating relative humidity	5% to 95%RH
	Storage temperature	-25 to 70°C -13 to 158°F(No freezing) ^*4
	Storage relative humidity	5% to 95%RH
	Vibration resistance	10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance	30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Main unit	PBT, PET/PAR, TPC, PC, Nickel-plated steel
	Actuator	PBT, SUS304, Nickel-plated steel
	Mounting bracket	Aluminum, Painted steel (screw: Steel)
Weight	Main unit	Approx.240 g 8.47 oz
	Actuator	Approx.130 g 4.59 oz
^1 When the actuator is pulled first after unlocked, the holding force increases. ^2 Due to the flexible structure of the actuator, the guard can open 3.8 mm 0.15" larger than the "Sar". The clearance between the actuator and the main unit may be narrowed by a maximum of 2.3 mm 0.09" due to the magnet power built into the actuator. ^3 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of cascaded units -1). ^4 When stored for a long period of time, please store it at temperature of 55°C 131°F or lower.

Keyence GC-S1R Keyence

€348,95

Only 7 units left

Specifications

Model		GC-S1R
Input/output points	Safety inputs	-
	Safety outputs
	Safety relay output	1 (3a)
	AUX outputs	-
	Test outputs
Safety input specifications	Input device
	Input type
	ON level (voltage/current)
	OFF level (voltage/current)
	Short-circuit current
	Protection circuit
	Maximum cable length
Safety output specifications	Output type
	Maximum load current
	Residual voltage (during ON)
	Leakage current (during OFF)
	Maximum capacitive load
	Load wiring resistance
	Protection circuit
	Maximum cable length
Safety relay output specifications	Output type	Relay (3a) (Externally-protected outputs)^*1
	Rated load (resistance load)	250 VAC 6A / 30 VDC 6A^*2
	Rated load (inductive load)	240 VAC 2A (AC-15) / 24 VDC 1A (DC-13)
	Relay output mechanical life	Resistance load (250 VAC 6A/30 VDC 6A): Min. 100,000 times Resistance load (250 VAC 1A/30 VDC 1 A): Min. 500,000 times Inductive load (AC-15: 240 VAC 2 A): Min. 100,000 times (cosø = 0.3) Inductive load (DC-13: 24 VDC 1 A): Min. 100,000 times (L/R = 48 ms)
	Maximum cable length	Max. 100 m 328.1'
	B10d	With rated load: 400,000 With low load: 2,000,000
Test output specifications	Output type	-
	Maximum load current
	Protection circuit
	Maximum cable length
AUX output specifications	Output type
	Maximum load current
	Residual voltage (during ON)
	Leakage current (during OFF)
	Protection circuit
	Maximum cable length
Applicable standards	EMC	EMS: IEC 61131-2/-6, EN61131-2/-6,EMI: IEC 61131-2, FCC Part15B Class A, ICES-003, Class A
	Safety	IEC 61508, EN 61508 SIL3, IEC62061 SIL CL3, ISO/EN 13849-1:2015 Cat. 4, PL e, UL1998
Dimensions		39.6×95×90 mm 1.56"×3.74"×3.54" (W×D×H)
Power supply	Power voltage	-
	Power consumption	Max. 80 mA
Environmental resistance	Ambient temperature	−10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	5 to 85% (No condensation)
	Storage temperature	-25 to +70 °C -13 to 158 °F (No freezing)
	Operating altitude	Max. 2000 m 6561.7'
	Overvoltage category	II (III for relay output part)
	Pollution degree	2
	Vibration resistance	Frequency: 5 to 9 Hz, Half amplitude: 3.5 mm 0.14" Frequency: 9 to 150 Hz, Acceleration: 10 m/s² 10 times each in X, Y, Z directions
	Shock resistance	Acceleration: 150 m/s², Operating time: 11 ms, 3 times each in X, Y, Z directions
Material		Polycarbonate
Weight		Approx. 180 g
^1 To comply with the requirements of IEC61131-2, connect 10 A fast blow fuse (IEC 60217) in series to each contact. ^2 Check the derating characteristics described later.

Keyence VP-90 Keyence

€452,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87355 Keyence

€168,95

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV2-CP50 Keyence

€699,95

In stock, 19 units

Specifications

Model		IV2-CP50
Supported languages		English / Japanese / German / Chinese (Simplified) /Chinese (Traditional) / Korean / Italian / French / Spanish / Portuguese / Czech / Hungarian / Polish / Thai^*1
Display		5.7" TFT color LCD, 640 × 480 (VGA)
Backlight	Method	White LED
	Duration	Approx. 50000 hours (25°C 77°F)
Touch panel	Method	Analog resistive
	Actuating force	0.8 N or less
Indicators		PWR, SENSOR
Ethernet	Standard	100BASE-TX/10BASE-T^*2
	Connector	M12 4-pin connector^*2
Expanded memory		USB memory^*3
Rating	Power voltage	24 VDC ±10% (including ripple)
	Current consumption	0.3 A or less
Environmental resistance	Enclosure rating	IP40
	Ambient temperature	0 to +50°C 32 to 122°F (No freezing)
	Relative humidity	35 to 85% RH (No condensation) ^*4
	Drop resistance	1.3 m 4.3' onto concrete (2 times in an arbitrary direction)
	Vibration resistance	10 to 55 Hz; double amplitude 0.7 mm 0.03"; 2 hours in each of the X, Y, and Z directions
Material		Main unit case: PC, Power connector: Brass + Ni plating, Ethernet connector: Zinc + Ni plating / PA, USB connector cover: EDPM, Pen holder: PC, Adapter fixing hook: POM, LED lamp cover: PC, Mounting adapter: PC, Stylus: POM
Weight		Main unit: Approx. 450 g With wall mounting adapter and stylus attached: Approx. 485 g
^1 When connected to the IV2 Series. When connected to the IV Series, the supported languages are the same as the IV-M30. ^2 Dedicated for use in connecting to the IV2 Series and IV Series. ^3 Use only products recommended by KEYENCE. ^4 If the ambient operating temperature exceeds 40°C 104°F, use the product under conditions where the absolute humidity is 85% RH or less at 40°C 104°F.

Keyence FU-44TZ Keyence

€121,95

In stock, 11 units

Specifications

Model		FU-44TZ^*1
Beam emitting direction		Top
Fibre unit length		1 m39.37" free-cut
Fibre unit diameter		ø1.0×2
Minimum bend radius		R2 mm0.079" Tough-Flex
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F
Weight		Approx. 3 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence FU-10 Keyence

€140,95

Only 6 units left

Specifications

Model		FU-10
Type		Variable spot
Focal distance		10 to 30 mm0.394" to 1.181"
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.3×2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 5 g

Keyence FD-G50 Keyence

€1.017,95

Only 6 units left

Specifications

Model			FD-G50
Pipe size	DN (Diameter Nominal)		32 A, 40 A, 50 A
	NPS (Nominal Pipe Size)		1 1/4", 1 1/2", 2"
	Outer diameter of pipe		ø41 to 45 mm 1.61" to 1.77", ø47 to 51 mm 1.85" to 2.01", ø58 to 62 mm 2.28" to 2.44"
	Pipe thickness		2.4 to 5.7 mm 0.09" to 0.22"
Supported pipe materials			Iron, steel, stainless steel
Supported fluids			Air, Nitrogen, other gases^*1
Fluid temperature			0 to 60ºC 32 to 140 °F
Recommended pressure			0.4 MPa or greater (58 PSI or greater)
Rated velocity of flow range			Up to 15 m/s
Actual flow rate range (typical)	m³/h		Pipe size 32 A: 54.00 Pipe size 40 A: 72.00 Pipe size 50 A: 120.00
	L/min		Pipe size 32 A: 900.0 Pipe size 40 A: 1200.0 Pipe size 50 A: 2000.0
	CFM		Pipe size 32 A: 32.00 Pipe size 40 A: 42.00 Pipe size 50 A: 70.00
Standard flow rate range (typical) [CFM]	20°C 68°F 60 psi 0.41 MPa		Pipe size 32 A: 151.58 Pipe size 40 A: 198.95 Pipe size 50 A: 331.58
	20°C 68°F 80 psi 0.55 MPa		Pipe size 32 A: 192.17 Pipe size 40 A: 252.22 Pipe size 50 A: 420.37
	20°C 68°F 100 psi 0.69 MPa		Pipe size 32 A: 232.76 Pipe size 40 A: 305.49 Pipe size 50 A: 509.16
	20°C 68°F 120 psi 0.83 MPa		Pipe size 32 A: 273.35 Pipe size 40 A: 358.77 Pipe size 50 A: 597.95
Display			QVGA 2.2" LCD color monitor
Display update cycle			Approx. 3 Hz
Display resolution	Instantaneous flow rate		0.01 m³/h, 0.1 L/min, 0.01 CFM
	Consumption/leakage amount		0.01 m³, 1 L, 0.1 CF
Response time			1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable)
Measurement accuracy	Between 10 and 100% of F.S.		±2.0% of RD^2^3^4^5
	Between 1 and 10% of F.S.		±1.0% of F.S.^2^3^4^5
Zero point error			±0.15% of F.S.^2^6
Static leakage repeatability			±1.0% of RD^4^7
Hysteresis			Variable
Flow units			CFM(S), CFM, m³/h (N), m³/h (S), m³/h, L/min (N), L/min (S), L/min
I/O wiring connection port			M12 4-pin connector (male)
Detection mode (switchable)	ch.1		Instantaneous flow mode/area mode/pulse (+) mode/integrated flow mode/warning mode (consump)^*8
	ch.2		Instantaneous flow mode/area mode/pulse (−) mode/warning mode (leak)/error output mode/analog output/integrated flow reset/flow rate zero input/origin adjustment input^*8
Standard I/O (switchable)	Control output (ch.1/ch.2)		NPN/PNP setting switchable, open collector output 30 VDC or less, max. 100 mA/ch, residual voltage: 2.5 V or less
	Analog output (ch.2)		4 to 20 mA/0 to 20 mA, load resistance: 500 Ω or less
	External input (ch.2)		Short-circuit current: 1.5 mA or less, input time: 20 ms or more
Protection circuit			Power supply reverse connection protection, power supply surge protection, short-circuit protection for each output, surge protection for each output
Analog input (for volume conversion)			M8 4-pin connector (female), analog current input (4 to 20 mA), input resistance: 100Ω or less
Power supplied to pressure sensor			Supply voltage: Equivalent to voltage applied to the FD-G, Supply current:70 mA or less (analog output of the pressure sensor included)
Communication interface	USB		USB 2.0
	Ethernet	Standard	IEEE 802.3u (100BASE-TX)
		Transmission rate	100 Mbps
		Cable	Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable
		Connector	M12 connector (female, D-code)
Network function			Modbus TCP, EtherNet/IP™, IO-Link^*9
Recording capacity	Consumption amount/ leakage amount		Approx. 5 years
	Events		100
Power supply	Power voltage		20 to 30 VDC including 10% ripple (P-P), Class 2
	Power consumption		350 mA or less at 20 V, 290 mA or less at 24 V, 230 mA or less at 30 V (load current excluded) (analog output of the pressure sensor excluded), 550 mA or less at 20 V, 490 mA or less at 24 V, 430 mA or less at 30 V (Maximum load current excluded) (analog output of the pressure sensor excluded)
Environmental resistance	Enclosure rating		IP65/67 (IEC 60529)^*10
	Ambient temperature		Detection head: −10 to +60°C 14 to 140°F (no freezing), display unit: −10 to +55°C 14 to 131°F (no freezing)
	Relative humidity		5 to 85%RH (no condensation)
	Vibration resistance		10 to 500 Hz, power spectral density: 0.816 G²/Hz, XYZ axes
	Shock resistance		100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Display unit		Body: PBT + coating, display: PMMA, Power supply port: SUS304-equivalent, Ethernet port: zinc nickel plating
	Detection head		Body: PPS/SUS304, rear surface: rubber
	Mounting/damping bracket		SUS304
Weight			Approx. 2.7 kg
^1 The gas must be uniform and capable of transmitting ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^2 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the type and status of the pipe and the type and temperature of the gas. ^3 This is the value when considering linearity + span error in a stable environment with a temperature of 25°C 77°F. ^4 Defined with stable velocity of flow distribution. Does not include pulsations and fluctuations in the velocity of flow distribution primarily attributable to the equipment. ^5 The linearity error characteristic due to the pipe is not included in this value. ^6 It is possible to reduce zero point errors by performing an origin adjustment. ^7 This is the value within the range where measurement accuracy is guaranteed. ^8 When Bi-directional is specified, the following functions cannot be used. The selection of the comparison view/leak ratio view/static leakage, the measurement/display of the leakage amount/integrated flow, the setting of the target value/warning set value, and money conversions. Also, the I/O settings are limited as shown below. • ch.1: Pulse(+) mode • ch.2: Pulse(-) mode, Error output mode, Integrated flow reset, Flow zero input, Origin adjustment input ^9 IO-Link: Compatible with specification v1.1/COM1 (4.8 kbps). IO-Link is a trademark or registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^10 The IP65/67 enclosure rating is lost when a USB connection is established.