Machine Vision Systems

Keyence BZ-H5C Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CL-V050N Keyence

€0,00

Sold Out

Specifications

Model				CL-V050N
Type				Optical unit
Head				CL-V050 ^*1
Reference distance				50 mm1.97"
Reference measurement range	Measurement range			±4 mm ±0.16"
	Linearity			±1.4 μm ±0.000055" ^*2
High precision measurement range	Measurement range			±1.6 mm ±0.06"
	Linearity			±1.3 μm ±0.000051" ^*2
Resolution				0.25 μm 0.000010" ^*3
Spot diameter				ø40 μm ø0.0016"
Laser class	Optical unit			Class I
Sampling cycle				100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head		IP40 degassed structure for vacuum environments ^*4
	Ambient light			Target surface illuminance: 30000 lux (Incandescent lamp)
	Operating ambient temperature	Head		-20 to 200°C -4 to 392°F
		Optical unit		0 to 50°C 32 to 122°F
	Relative humidity			85% RH or less (no condensation)
	Vibration resistance	Head		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit		10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance			15 G, 6 ms
	Vacuum			Ultra-high-vacuum environments ^*5
	Explosion-proof	performance	Head	None
			Optical unit
		Zone/Division	Head
			Optical unit
		Ambient temperature	Head
			Optical unit
		Certification number
Temperature characteristic	Head			0.015% of F.S./°C ^*6
	Optical unit			0.015% of F.S./°C
Material	Head			SUS304
	Optical unit			Polycarbonate
Weight	Head			Approx. 100 g 3.53 oz
	Optical unit			Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface). ^3 Value measured using 16,384 average cycles with KEYENCE reference workpiece (mirrored surface). ^4 The enclosure rating is equivalent to IP50 when the included sticker is attached. ^5 Operation verification has been performed in environments of 10^-6 Pa. ^6 These figures are based on the case where a jig made of SUS303 (or SUS304) is fixed between the head and the object.

Keyence SV2-D10CG Keyence

€0,00

Sold Out

Specifications

Model				SV2-D10CG
Type				Motor power cable, Hi-flex robotic cable with electromagnetic brake
Length				10 m 32.8'
Note				for 750 W motor

Keyence CA-DBB34H Keyence

€0,00

Sold Out

Specifications

Model				CA-DBB34H
Type				High-Intensity, Large Bar Lights
LED color				Blue
Power consumption				18.4 W × 2 ch^*1
Input voltage				12 VDC
Weight				Approx1050 g
^*1 Connect these models to both channels.

Keyence CA-LHS16 Keyence

€360,95

Only 3 units left

Specifications

Model				CA-LHS16
Type				High-resolution lens
Overview				Specialised lens for the compact camera (ø17 ø0.67").

Keyence OP-89141 Keyence

€0,00

Sold Out

Specifications

Model		OP-89141
Type		Standard ^1 ^2
Sensor side	Connector size	M12 4-pin
	Appearance	Straight
Cable connector	Connector size	M12 4-pin
	Appearance	Straight
Length		5 m 16.4'
Material		Cable: PVC, Connector: Nickel-plated brass
Weight		Approx. 180 g 6.35 oz
^1 Use a heat/cleaning-resistant cable for the weld-resistant all-metal type in environments of 80°C 176°F or higher and for the environment-resistant all-metal type in environments of -25°C -13°F or lower or at 80°C 176°F or higher. ^2 When used with the general-purpose all-metal type or the environment-resistant all-metal type, the enclosure rating is IP67.

Keyence GL-VM26LP Keyence

€0,00

Sold Out

Specifications

Model			GL-VM26LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			26
Total length			1040 mm 40.94"
Detection height			1000 mm 39.37"
Protection height			1085 mm 42.72"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.0
		OFF→ON	48.6 ^*3
		All blocked→ON	55.4 ^*4
	With channel A or B	ON→OFF	13.4
		OFF→ON	59.1 ^*3
		All blocked→ON	77.4 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	117 ^*5
		Receiver	130 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	52 ^*5
		Receiver	58 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		680 g 24.00 oz
	Receiver		690 g 24.35 oz
	Total		1370 g 48.36 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence ES-12AC Keyence

€0,00

Sold Out

Specifications

Model		ES-12AC^*1
Type		AC
Operation mode		N.O./N.C. (switch-selectable)
Indicator		Output: Red LED
Output	Control output	Thyristor 115 VAC, 5 to 300 mA
Disconnection alarm output		―
Leakage current (OFF time)		0.2 mA max.
Response time		10 ms max.
Temperature characteristics		±8% of detecting distance at 23°C 73.4°F, within 0 to 50°C 32 to 122°F
Sensitivity adjustment		15-turn trimmer
Rating	Power voltage	85 to 115 VAC 50/60 Hz
	Current/power consumption	1.5 VA max.
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 82 g
^*1 This product does not comply with the EMC directive.

Keyence CL-L007G Keyence

€0,00

Sold Out

Specifications

Model			CL-L007G
Type			Optical unit
Head			CL-L007 ^*1
Reference distance			7 mm 0.28 "
Reference measurement range	Measurement range		±1.5 mm ±0.06"
	Linearity		±1.95 μm ±0.000077" ^*2
High precision measurement range	Measurement range		±0.5 mm ±0.02"
	Linearity		±0.78 μm ±0.000031" ^*2
Resolution			0.015 μm 0.000001" ^*3
Spot diameter			ø750 μm ø0.0295"
Laser class	Optical unit		Class I
Sampling cycle			100/200/500/1000 μs (Adjustable 4-stage)
Environmental resistance	Enclosure rating	Head	IP67 (IEC60529)
	Ambient light		Target surface illuminance: 30000 lux (Incandescent lamp)
	Ambient temperature		0 to 50°C 32 to 122°F
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance	Head	10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
		Optical unit	10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
	Shock resistance		15 G, 6 ms
Temperature characteristic	Head		0.005% of F.S./°C
	Optical unit		0.015% of F.S./°C
Material	Head		SUS
	Optical unit		Polycarbonate
Weight	Head		Approx. 140 g 4.94 oz
	Optical unit		Approx. 1600 g 3.53 lb
^1 Sensor head and optical unit are a matched pair. Not cross compatible. ^2 Value measured in displacement mode with KEYENCE reference workpiece (mirrored surface). ^*3 Value measured using 16,384 average cycles with KEYENCE reference workpiece (mirrored surface).

Keyence OP-88112 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EG-547W Keyence

€0,00

Sold Out

Specifications

Model			EG-547W^*1
Type			AC, tolerance setting^*2
Sensitivity adjustment			10-turn potentiometer dial
Function	Operation mode		External synchronization,analog voltageswitch-selectable
	Operation mode	External synchronization	Equipment (both without contacts and with contacts)
Output	Control output 1 (NPN)		100 mA max. (40 V max.) Residual voltage： 1 V max.
	Control output 2		―
	Disconnection alarm output (NPN)
	Response time (Relay contact)		1 ms
			―
OFF-delay time
Temperature characteristics			0.08%/°C^*3
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Power consumption		120mA or less
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight			Approx. 390 g
^1 The EG-547W cannot be used in combination with SH-422, 430, 440, 290, 809, 816 and 822. ^2 Please contact KEYENCE for information on products that comply with the EMC directive. ^*3 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.

Keyence BZ-H5A Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-H500MX Keyence

€1.586,95

In stock, 15 units

Specifications

Model		CA-H500MX
Image element		Monochrome CMOS, 16× high-speed reading using square-pixel
Unit cell size		3.45 µm × 3.45 µm 0.14 Mil × 0.14 Mil
Valid pixel count		5 megapixel mode: 2432 (H) × 2040 (V), 2 megapixel mode: 1600 (H) × 1200 (V)
Image size		Equivalent to 2/3"
Scanning system		Progressive 5 megapixel mode: 27.7 ms 2 megapixel mode: 11.7 ms
Pixel transfer frequency		195 MHz
Transfer system		Digital serial transfer
Electronic shutter		Can be set to 0.017 to 100 msec by specifying the following numerical inputs: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 1/50000
Lens mount		C-mount
Environmental resistance	Ambient temperature	0 to 40°C 32 to 104°F
	Relative humidity	85% RH or less
Weight		Approx. 280 g (not including lens)

Keyence KV-SIR32XT Keyence

€392,95

Only 5 units left

Specifications

Model		KV-SIR32XT
Type		High-speed I/O unit
External connection method		Connector (MIL specification)^*1
Input	Number of inputs	32 points
	Input mode	24 VDC mode, 5 VDC mode^2 (with overvoltage protection function^3)
	Maximum input voltage	24 VDC mode: 28.8 VDC 5 VDC mode: 6.0 VDC
	Rated input voltage	24 VDC mode: 24 VDC, 5.1 mA 5 VDC mode: 5 VDC, 8.8 mA
	Minimum ON voltage	24 VDC mode: 19 V 5 VDC mode: 3.5 V
	Maximum OFF current	24 VDC mode: 1.5 mA
	Maximum OFF voltage	5 VDC mode: 1.5 V
	Common method	16 points/1 common (2 terminals)^*4
	Input time constant	1 μs/10 μs/20 μs/100 μs/500 μs/1 ms/5 ms/10 ms/50 ms
	Input impedance	24 VDC mode: 4.4 kΩ 5 VDC mode: 350 Ω
Output	Number of outputs	32 points
	Output mode	MOSFET (sink) (with overcurrent protection function)^*5
	Rated load	30 VDC, 0.2 A (1.6 A/1 common)
	Leakage current at OFF	100 μA or less
	Residual voltage at ON	0.5 VDC or less
	Common method	16 points/1 common (2 terminals)^*4
	Operation time	OFF to ON: 1 μs or less: (Load: 5 mA to 200 mA) ON to OFF: 5 μs or less: (Load: 5 mA to 200 mA)
Internal current consumption		130 mA or less
Weight		Approx. 190 g
^1 Connectors for connector-type I/O units are not included XC Series Terminal Block Conversion Unit is available. ^2 5 VDC mode can only be used with IN100 to IN115. ^3 If an overvoltage is detected, all inputs (IN100 to IN115) in the shared commons will be turned OFF until the power is cycled or until PRG is switched to RUN. ^4 The four input and output COMs (input COM0 and COM1, and output COM2 and COM3) are independent. For each COM, those with two terminals are short-circuited internally. ^*5 If an overcurrent is detected at even one point, protection operation (output OFF) will be enforced for all of the outputs in the shared commons (COM2: OUT200 to 215, COM3: OUT300 to 315) and automatic recovery will be repeated until the cause is eliminated.

Keyence GS-B31 Keyence

€0,00

Sold Out

Specifications

Model				GS-B31
Type				Locking type
Weight				Approx. 380 g

Keyence GL-RC20 Keyence

€303,95

Only 1 unit left

Specifications

Model				GL-RC20
Type				Extension Cable
Applicable product				GL-R Series
Number included				1 cable
Cable end				M12 connector (5-pin female) - Loose wires
Length				20 m 65.62'
Material				Connector for extension: PVC/nickel-plated brass, Cable: PVC
Note				Extension cable for the GL-R Series. Use this together with the main unit connection cable (for extension). Brown and blue: 22 AWG (nominal cross section: 0.34 mm²), other: 26 AWG (nominal cross section: 0.14 mm²)
Weight				Approx. 770 g

Keyence CV-3502 Keyence

€6.355,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R175F Keyence

€0,00

Sold Out

Specifications

Model			GL-R175F
Detection capability			ø0.55" ø14 mm
Total length			69.29" 1760mm
No. of beam			175
Detection height			68.50" 1740mm
Protection height			69.45" 1764mm
Beam axis spacing/Lens diameter			10 mm 0.39" / ø4 ø0.16"
Detecting distance			0.66 to 32.81' 0.2 to 10 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	23.3
		OFF→ON	73.8^*2
		All blocked→ON	130.2^*3
	Optical synchronization system (Channel A or B)	ON→OFF	35.8
		OFF→ON	92.5^*2
		All blocked→ON	179.9^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	88
		Receiver	105
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		2500 g
	Receiver
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence RK-10DY Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-51463 Keyence

€0,00

Sold Out

Specifications

Model				OP-51463
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V87F, SL-V44H, SL-V22L, SL-C44H, SL-C22L
Number included				1 pcs.
Length				870.3 mm 34.26"
Material				Translucent plastic: Polycarbonate (t=Approx. 1.14mm), Black plastic: ABS
Note				To install this product on both the transmitter and receiver, 2 sets are required. Use the dimming filters (sold separately) by attaching them to the front protection cover. When the front protection cover is attached, the L-shaped mounting bracket (OP-42

Keyence GL-VA800 Keyence

€0,00

Sold Out

Specifications

Model				GL-VA800
Compatible with GL-V models				GL-VM79F, GL-VM40H, GL-VM20L (both PNP/NPN)
Total length				800 mm 31.50"
Material				Polycarbonate ABS
Weight				80 g

Keyence GS-A01 Keyence

€158,95

Only 6 units left

Specifications

Model				GS-A01
Type				Non-contact type
Weight				Approx. 15 g

Keyence IV-2000M Keyence

€1.075,95

Only 10 units left

Specifications

Model		IV-2000M
Type		Long range
Installed distance		300 to 2,000 mm 11.81" to 78.74"
View		Installed distance 300 mm 11.81": 45 (H) × 33 (V) mm 1.77" (H) × 1.30" (V) to installed distance 2000 mm 78.74": 300 (H) × 225 (V) mm 11.81" (H) × 8.86" (V)
Image sensor	Type	1/3 inch monochrome CMOS
	Pixel	752 (H) x 480 (V) 29.61" (H) x 18.90" (V)
Focus adjustment		Manual
Exposure time		1/10 to 1/25,000
Lights	Illumination	Infrared LED
	Lighting method	Pulse lighting/DC lighting is switchable
Tools	Type	Shape Detection, Color Area^1, Area^2, position adjustment
	Number	Detection tools: 16 tools, position adjustment tool: 1 tool^*3
Switch settings (programs)		32 programs
Image history	Numbers	300 images^4^5
	Condition	NG only/All is selectable^*5
Analysis information		OFF/Statistics/Histograms is switchable Statistics: Processing time (latest value, MAX, MIN, AVE), number of OKs, number of NGs, trigger numbers, trigger errors, judgment results list by tools Histograms: Histogram, matching degree (latest value, MAX, MIN, AVE), numbers of OKs, numbers of NGs^*6
Other functions		HDR, HighGain, Color filters^1, Digital zoom^7, Brightness correction, Tilt correction, White balance^1, Mask outline, Mask area, Test run, ToolAutoTune, Input monitor, Output test, Security settings, Simulator^8
Indicators		PWR/ERR, OUT, TRIG, STATUS, LINK/ACT
Input	Type	Non-voltage input/voltage input is switchable For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
	Inputs	6 inputs (IN1 to IN6)
	Function	IN1: External trigger, IN2 to IN6: Enable by assigning the optional functions Assignable functions: Program switching, Clear error, External master image registration
Output	Type	Open collector output NPN/PNP is switchable, N.O./N.C. is switchable For open collector NPN output: Maximum rating 26.4 V 50 mA, remaining voltage 1.5 V or lower For open collector PNP output: Maximum rating 26.4 V 50 mA, remaining voltage 2 V or lower
	Outputs	4 outputs (OUT1 to OUT4)
	Function	Enable by assigning the optional functions Assignable functions: Total judge result, RUN, BUSY, Error, Position adjustment result, Judge result of each tool, Result of the logical operation of each tool
Ethernet	Standard	100BASE-TX/10BASE-T^*9
	Connector	M12 4pin connector^*9
Network function		FTP client, EtherNet/IP™, PROFINET
Rating	Power voltage	24 VDC ±10 % (including ripple)
	Current consumption	0.6 A or less
Environmental resistance	Enclosure rating	IP67^*10
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions^*11
	Shock resistance	500 m/s², 3 times in each of 6 directions^*11
Material		Main unit case: Aluminium die-casting, Packing: NBR, Front cover: Acrylic, Mounting adapter: POM
Weight		Approx. 270 g
^1 Color type only ^2 Possible with both the Color type and monochrome type ^3 Tools can be installed by programs. ^4 When using the FTP client function: 210 pictures ^5 Saves to the memory in the sensor. The images saved in the sensor can be backed up to the USB memory installed to the intelligent monitor (IV-M30) or to the PC by the software for IV (IV-H1). ^6 This can be displayed on the intelligent monitor (IV-M30) or by software for the IV/IV-G Series (IV-H1). ^7 Possible with both the color type and monochrome type ^8 Simulator can be used with the IV software (IV-H1). ^9 This is for connection with the intelligent monitor (IV-M30) or software for IV (IV-H1). ^10 Except when polarized filter attachment (OP-87436/OP-87437) is mounted ^*11 Except when IV-G dome attachment (IV-D10) is mounted

Keyence FD-P50 Keyence

€735,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.