Machine Vision Systems

€0,00

Sold Out

Specifications

Model				SV2-B200AK
General specifications	Applicable servo amplifier			SV2-200L2
	Rated output			1.8 kW
	Rated torque			11.5 N·m ^*1
	Instant maximum torque			28.7 N·m
	Rated current			16.7 Arms
	Instant maximum current			42 Arms
	Rated rotation speed			1500 min^-1
	High rotation speed			3000 min^-1
	Torque constant			0.748 N·m/Arms
	Rotor moment of inertia			28.1 ×10^-4kg·m²
	Rated power rating			47.1 kW/s
	Rated angle acceleration			4090 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4'/s² (forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			phase F
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			5 ×
	Approx. weight			11 kg
Electromagnetic brake specifications	Capacity			10 W
	Rated voltage			24 VDC +10%/-0%
	Rated current (@20°C 68°F)			0.41 A
	Holding torque			19.6 N·m
	Release time			100 ms ^*2
	Operating time			80 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence OP-87040 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-51456 Keyence

€0,00

Sold Out

Specifications

Model				OP-51456
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V31F, SL-V16H, SL-V08L, SL-C16H, SL-C08L
Number included				1 pcs.
Length				310.3 mm 12.22"
Material				Translucent plastic: Polycarbonate (t=Approx. 1.7mm), Black plastic: ABS
Note				To install this product on both the transmitter and receiver, 2 sets are required. Use the dimming filters (sold separately) by attaching them to the front protection cover. When the front protection cover is attached, the L-shaped mounting bracket (OP-42

Keyence BZ-H5K Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence WM-6210 Keyence

€0,00

Sold Out

Specifications

Model				WM-6210
Camera unit	Measurement range (W × D × H)			10000 × 3500 × 5000 mm 393.70" × 137.80" × 196.85"
	Camera unit rotation angle	Horizontal rotation		±120°
		Vertical tilt		±30°
	Minimum display unit	Distance		0.001 mm 0.00004"
		Angle		0.001°
	External input			2 non-voltage inputs
	Communication	WLAN communication		IEEE 802.11 a/b/g/n/ac ^*1
		Bluetooth communication		Bluetooth 5.0
		USB communication		USB 3.0
		Infrared communication		945 nm
	Power supply			Supplied from dedicated AC adapter
	Ratings	Rated voltage		24 VDC
		Current consumption		4.5 A
	Environmental resistance	Operating ambient temperature		0 to 40°C 32 to 104°F
		Operating ambient humidity		Max. 80% RH (no condensation)
	Weight			Approx. 7.2 kg 15.87 lb
Contact probe	Probing system accuracy			±(28 + 5 L/1000) μm ^*2
	Marker	No. of markers		7
		Light source		870 nm
	Applicable stylus			M5
	Display	Display method		2.7-inch transmissive TFT color LCD
		Resolution		320 × 240 pixels
		Touch panel		Analog resistive
	Communication	Bluetooth communication		Bluetooth 5.0
		USB communication		USB 2.0
		Infrared communication		945 nm
	Power supply	Battery		Dedicated lithium-ion battery pack
		Capacity		3250 mAh
		Charging time		6.5 hours
		Continuous usage time		Approx. 6 hours
	Ratings	USB connection	Rated voltage	5 VDC
			Current consumption	1 A
		Battery operation	Rated voltage	3.63 VDC +10%/-1%
			Current consumption	1.25 A
	Environmental resistance	Operating ambient temperature		0 to 40°C 32 to 104°F
		Operating ambient humidity		Max. 80% RH (no condensation)
	Weight			Approx. 600 g 21.18 oz (with battery inserted)
Laser-scanning probe	Scanning system accuracy			±(50 + 5 L/1000) μm ^*3
	Repeatability			0.025 mm 0.001" ^*4
	Working distance			300 mm 11.81"
	Depth of field			±100 mm ±3.94"
	Scan speed			Up to 2.4 million points per second
	Laser classification			2 M
	Display	Display method		3.5-inch transmissive TFT color LCD
		Resolution		640 × 480 pixels
		Touch panel		Analog resistive
	Power supply			Supplied from dedicated cable
	Ratings	Rated voltage		24 VDC
		Current consumption		1 A
	Environmental resistance	Operating ambient temperature		0 to 40°C 32 to 104°F
		Operating ambient humidity		Max. 80% RH (no condensation)
	Weight			Approx. 1 kg 2.20 lb
^1 With the WM-WL attached. ^2 Refer to ISO 10360-2 (in the range of 3980 × 2500 × 1500 mm 156.69" × 98.43" × 59.06" and when the operating ambient temperature is 20°C ±1°C 68.0°F ±1.8°F; L represents the measurement length (Unit: mm inch)). ^3 Refer to VDI/VDE 2634 Part 3 (at 20°C ±1°C 68.0°F ±1.8°F; L represents the measurement length (Unit: mm inch)). ^4 2σ, when measuring ball diameter.

Keyence SJ-HW01 Keyence

€0,00

Sold Out

Specifications

Model				SJ-HW01
Type				Wide angle booster starter unit Used to widen the static elimination range.

Keyence LX2-11R Keyence

€648,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-H108C Keyence

€0,00

Sold Out

Specifications

Model		SJ-H108C
Type		HC
Ion generation method		Corona discharge
Structure		Shock-proof, resistance-coupled
Voltage application method/applied voltage		Pulse AC method/±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Cleanliness		ISO 14644-1 Class 2 ^*2
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or non-voltage contact signal
Control output		NPN type photorelay, 100 mA max. (at 40 V max.)
Major functions		Condition alarm output, ion level alarm output, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*3
Effective length		1080 mm 42.52" ^*4
No. ofelectrodes		16
Static elimination bar length		1040 mm 40.94"
Rating	Power voltage	24 VDC-36 V±10%
	Current consumption	500 mA (at 24 VDC)/350 mA (at 36 VDC)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32.0°F to 104.0°F
	Relative humidity	35 to 85% RH (No condensation)
Material	Electrode probe	Silicon
	Main unit	ABS resin/PC
Weight	Static elimination bar	1200 g 42.33 oz
^1 Value measured under the following conditions: Operating distance: 300 mm 11.81" Air supply pressure: 0.2 MPa Frequency: 68 Hz Ambient operating temperature: 0 to +40°C 32.0°F to 104.0°F Ambient operating humidity: 35 to 65%RH Measurement position: Center of bar Under a 0.3 m/s 1.0 ft/s downflow ^2 Contact KEYENCE for detailed conditions. ^3 Contact KEYENCE when using the air purge function with intermittent air supply. ^*4 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence CV-X272F Keyence

€3.974,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-X1000 Keyence

€570,95

Only 3 units left

Specifications

Model		MD-X1000
Type		Marking unit (controller + head) 13 W Standard area
2D code reader add-in (sold separately)		MD-XAD1/MD-XAD1A
Console (sold separately)		MC-P1
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)^*1
	Wavelength	1,064 nm
	Output	13 W
Q-switch frequency		CW (continuous wave), 1 to 400 kHz
Guide laser/Working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)^*1
Marking area		125 x 125 x 42 mm 4.92" x 4.92" x 1.65"
Standard working distance (±variable width)		189 mm (±21 mm) 7.44" (±0.83")
Marking resolution		2 µm
Scan speed		Max. 12,000 mm/s 472.44"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font^*2
	Barcode	CODE39, ITF, 2of5, NW7 (CODABAR), JAN, CODE128, EAN, UPC-A, UPC-E
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC‐A
	Logo image	Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary marking, Moving marking (constant, encoder)
	Character size (marking height/width)	0.1 to 125 mm 0.004" to 4.92"
	No. of registered programs	2,000 max.
	No. of program blocks	256
I/O (Input/output)		Terminal block I/O, MIL connector I/O, contactor control I/O^*3
Interface		RS-232C, USB 2.0, Ethernet (100BASE-TX/10BASE-T)^*4
Head installation direction		All directions
Head cable length		4.3 ±0.1 m 0.17" ±0.01"
Cooling method		Forced air cooling
Rated voltage and power consumption		100 to 120/200 to 240 VAC ±10 %, 50/60 Hz, 650 VA max.
Environmental resistance	Enclosure rating	IP64 (marking head)
	Pollution degree	2
	Overvoltage category	II
	Ambient temperature for storage	-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature	0 to +40 °C 32 to 104 °F
	Ambient humidity for storage	30 to 85 % RH (No condensation)
	Relative humidity
Weight		Controller: 23.0 kg Head: 13.6 kg Console: 2.0 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel]. ^3 Supported models: MD-X1000C, MD-X1020C, MD-X1500C, MD-X1520C ^4 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX). The Ethernet port supports communication with Marking Builder 3 (ActiveX), TCP/IP communication, EtherNet/IP™, and PROFINET.

Keyence LV-11SB Keyence

€235,95

Only 10 units left

Specifications

Model			LV-11SB^*1
Type			Main unit
Output			NPN
Control output			NPN open-collector x 2 ch 40 VDC max. 100 mA max. per output
Response time	ExceptLV-S31	ULTRA	4 ms
		SUPER	2 ms
		TURBO	500 µs
		FINE	250 µs
		HSP	80 µs
	LV-S31standard mode		500 µs
	LV-S31standard mode	SPED2	2 ms
		SPED3	8 ms
		SPED4	32 ms
	LV-S31High-speed mode		250 µs
Control input			Light emission stop input, external calibration, set value bank selection input, or shift input
Number of interference prevention units	ULTRA		4^*2
	SUPER
	TURBO		2^*2
	FINE
	HSP		0^*2
Unit expansion			Up to 16 expansion units can be installed (17 units including the main unit)^*3
Rating	Power voltage		12 to 24 VDC, Ripple (P-P) 10 % or less, Class2^*4
	Power consumption	Normal	1.7 W max. (70 mA max. for 24 V)
		Eco-Half Eco-All	1.55 W max. (65 mA max. for 24 V)
Environmental resistance	Ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)^*5
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material	Main unit		Main body, cover: Polycarbonate
Weight			Approx. 80 g (including 2 m 6.6' cable)
^1 LV-S62 and LV-S63 can ONLY be used with amplifiers ending with B or BP. ^2 Numbers for the LV-S31 are four in standard mode and two in high-speed mode. ^3 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient temperature range varies as follows: 1 to 2 units connected: -10 to +55ºC 14 to 131ºF 3 to 10 units connected: -10 to +50ºC 14 to 122ºF 11 to 16 units connected: -10 to +45ºC 14 to 113ºF ^4 When more than 8 units connected, be sure to use supply voltage 24 VDC Ripple (P-P) 10 % or less ^*5 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient temperature range varies as follows: 1 to 2 units connected: -10 to +55 °C 14 to 131°F, 3 to 10 units connected: -10 to +50 °C 14 to 122°F, 11 to 16 units connected: -10 to +45 °C 14 to 113°F

Keyence LV-12SA Keyence

€284,95

In stock, 12 units

Specifications

Model			LV-12SA
Type			Expansion unit (1 line)
Main unit/expansion unit
Applicable model			LV-S61/S41/S41L/S31/S71/S72
Control output			NPN open-collector × 2 channels, 40 VDC maximum, 100 mA or less per output
Response time	ExceptLV-S31	ULTRA	4 ms
		SUPER	2 ms
		TURBO	500 µs
		FINE	250 µs
		HSP	80 µs
	LV-S31standard mode		500 µs
	LV-S31standard mode	SPED2	2 ms
		SPED3	8 ms
		SPED4	32 ms
	LV-S31High-speed mode		250 µs
Control input			Light emission stop input, external calibration, set value bank selection input, or received light intensity shift input
Number of interference prevention units	ULTRA		4
	SUPER
	TURBO		2
	FINE
	HSP		0
Unit expansion			Up to 16 expansion units can be connected (a total of 17 units).^*1
Rating	Power voltage		12 to 24 VDC, Ripple (P-P) 10 % or less, Class2^*2
	Power consumption	Normal	1.5 W or less (62.5 mA or less at 24 V)
		Eco-Half Eco-All	1.35 W or less (57.3 mA or less at 24 V)
Environmental resistance	Ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)^*3
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
Material	Main unit		Main body, cover: Polycarbonate
Weight			Approx. 80 g (including 2 m 6.6' cable)
^1 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 or 2 Units: -10 to 55°C 14 to 131°F, 3 to 10 Units: -10 to 50°C 14 to 122°F, 11 to 16 Units: -10 to 45°C 14 to 113°F ^2 When more than 8 units connected, be sure to use supply voltage 24 VDC Ripple (P-P) 10 % or less ^*3 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient temperature range varies as follows: 1 to 2 units connected: -10 to +55 °C 14 to 131°F, 3 to 10 units connected: -10 to +50 °C 14 to 122°F, 11 to 16 units connected: -10 to +45 °C 14 to 113°F

Keyence EV-108MSO(2091) Keyence

€0,00

Sold Out

Specifications

Model		EV-108MSO (2091)
Type		Shielded
Shape		M8
Detecting distance		1.5 mm 0.06" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		10 x 10 mm 0.39" x 0.39"
Hysteresis		10% max. of detecting distance
Response frequency		800 Hz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -25 to +70°C -13 to +158°F
Control output (switching capacity)		5 to 80 mA
Protection circuit		Reversed polarity, surge voltage
Cable length		500 mm19.685"
Rating	Power voltage	12 to 24 VDC
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Case material		Stainless steel (SUS304)
Weight		Approx. 30 g

Keyence LV-S72R Keyence

€427,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-X252A Keyence

€7.782,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-51604 Keyence

€304,95

Only 3 units left

Buy the Keyence OP-51604 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence OP-51604 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence CV-2100 Keyence

€1.901,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-XC1R1 Keyence

€446,95

Only 5 units left

Specifications

Model				FD-XC1R1
Supported diameter				Outer diameter of pipe: ø 3 0.12 ",1/8 " (3.18 mm) Attachable range: ø 2.7 to 3.7 0.11 " to 0.15 "
Weight				Approx. 50 g

Keyence AP-31K Keyence

€282,95

Only 1 unit left

Specifications

Model		AP-31K
Type		Negative pressure, NPN
Rated pressure		0 to -29.9 inchHg
Fluid type		Air or non-corrosive gases
Type of pressure		Gauge pressure
Display		3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm 0.43")
Display resolution		0.1 inchHg, 0.1 kPa, 1 mmHg, 0.001 bar
Detectable pressure range		-15 to +110 % of F.S.
Display temperature characteristic		±1 % max. (of F.S.) of detecting pressure at 25 °C 77 °F (0 to 50 °C 32 to 122 °F)
Response time (Chattering prevention function)		2.5/5/100/500 ms (selectable)
I/O	Analog output	1 to 5 V (Load impedance: 47 kΩ min.)
	Control output	NPN open collector 100 mA max. (40 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable)
Rating	Power voltage	12 to 24 VDC ±10 %
	Current consumption	50 mA (at 24 V) or less, 90 mA (at 12 V) or less
Environmental resistance	Pressure resistance	72.5 PSI
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable
Weight		Approx. 120 g

Keyence FU-96T Keyence

€337,95

Only 5 units left

Specifications

Model		FU-96T^*1
Type		Thrubeam
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2
Minimum bend radius		R25 mm0.984"^*2
Minimum detectable object		Opaque material with a diameter of 0.2 mm0.008"^*3
Tightening torque		0.2 Nm or less
Environmental resistance	Enclosure rating	IP67^*4
	Ambient temperature	0 to +60 °C 32 to 140 °F (No condensation and no freezing)^*5
	Relative humidity	35 to 85 % RH (No freezing and No condensation)^*6
Material		Main unit case : PFA, fiber sheath : PFA^*4
Accessories		Fiber cutter
Weight		Approx. 35 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The section 25 mm in length from the screw cap tip of the main unit case cannot be bent. ^3 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state. ^4 Using this product in high-temperature liquids or steam may lead to penetration of the fluorocarbon polymers, which may cause fluctuations in the received light intensity and damage to the internal components. ^5 Use this product under the condition that if the ambient temperature exceeds 60 °C 140 °F, the absolute humidity is 60 °C 140 °F 85%RH or less. ^6 Use this product under the condition that if the ambient temperature exceeds 60 °C 140 °F, the absolute humidity is 60 °C 140 °F 85 % RH or less.

Keyence FU-2540 Keyence

€199,95

Only 6 units left

Specifications

Model				FU-2540
Type				Adjustable beam spot
Spot diameter				ø0.9 to 3.5 mmø0.035" to 0.138"

Keyence OP-88504 Keyence

€0,00

Sold Out

Specifications

Model				OP-88504
Appearance				Pitch-Conversion Mounting Bracket (Includes Sensor Head Fastening Screws × 2)
Material				SUS316L Other
Weight				Approx. 9 g

Keyence PHOTOELECTRIC Keyence

€262,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ER-GS12PC Keyence

€0,00

Sold Out

Specifications

Model		ER-GS12PC
Type		General-purpose all-metal shielded type Screw type M12 Connector (M12 4-pin) PNP output Short-Range
Power supply cable length		― ^*1
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		None
Button	Function	―
Detecting distance		2 mm 0.08" ±10% ^*2
Response frequency		150 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		12 × 12 mm 0.47" × 0.47"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303, Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 35 g 1.24 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.