Machine Vision Systems

Keyence AP-10S Keyence

€494,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88877 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R12L Keyence

€2.329,95

Only 3 units left

Specifications

Model			GL-R12L
Detection capability			ø1.77" ø45 mm
Total length			18.90" 480mm
No. of beam			12
Detection height			17.32" 440mm
Protection height			20.67" 525mm
Beam axis spacing/Lens diameter			40 mm / ø5 1.57" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	6.6
		OFF→ON	48.7^*2
		All blocked→ON	63.1^*3
	Optical synchronization system (Channel A or B)	ON→OFF	7.4
		OFF→ON	49.9^*2
		All blocked→ON	66.3^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	46
		Receiver	70
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		660 g
	Receiver
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence SI-F1003V Keyence

€0,00

Sold Out

Specifications

Model			SI-F1003V
Separate type			SI-F1003/SI-FD500
Type			Built-in main controller type
No. of connectable spectrum units			2
Display	Minimum display unit		0.001 µm
	Display range		±999.999 µm to ±9999.99 mm (7 settings selectable)
	Display cycle		10 times/sec.
Terminal block	Laser remote interlock input		Non-voltage input^*1
	TIMING1 input
	RESET1 input
	Auto-zero1 input
	Laser control input
	Analog voltage output		±10 V x 2 outputs, Output impedance: 100 Ω^*1
	Analog current output		4 to 20 mA x 2 outputs, Maximum load resistance: 350 Ω^*1
	Alarm output		NPN open-collector output (N.C.)^*1
	General comparator output		NPN open-collector output^*1
Expansion connector	TIMING2 input		Non-voltage input^*1
	RESET input
	Auto-zero input
	Program switch input		Non-voltage input x 3 inputs^*1
	Alarm output		NPN open-collector output (N.C.)^*1
	Comparator/ binary output	Binary output	Measured value data output (21 bits) OUT selectable NPN open-collector output^*1
		Strobe output	NPN open-collector output^*1
		Binary selection output
		Binary selection input	Non-voltage input^*1
RS-232C interface			Measured data output and control input/output (Baud rate selectable to 115,200 bps max.)
USB interface			USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)
Ethernet interface			100Base-TX/10Base-T
Major functions			12 Out simultaneous measurement calculation, average, filter, scaling measurement, measured value alarm, tolerance setting, auto-zero, data storage, light monitor, 8-program memory, interferometer mode, mask, connection of setting support software, etc.
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption		One head connected: 0.6 A or less. Six heads connected: 1.5 A or less.
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F^*2
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 0.5 mm 0.02", 2 hours in each of the X, Y, and Z directions
Weight			Approx. 600 g
^1 • NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. • Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. • Part of the input/output circuit of the SI Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring". ^2 When two or more expansion controllers are connected, the ambient temperature is 0 to +40 °C 32 to 104 °F.

Keyence GS-53PC Keyence

€682,95

Only 6 units left

Specifications

Model			GS-53PC
Lock type			Power-to-release type
Type			Advanced function type
Response time	Lock	Lock→Unlock	220 ms^1^2
		Unlock→Lock	220 ms^1^2^*3
Lock	Locking force (Fzh)		Min. 2,000 N
	Alignment tolerance of lock		±2 mm ±0.08"
	Mechanical life-span		1 million cycles or more (with door operation speed of 1 m/s)
	Acceptable operation frequency		1 Hz^*4
	Door radius		Min. 250 mm 9.84"
	Auxiliary release		Front, back ^*5
Cascading			Max. 25 units
Control output (OSSD output)	Output		Transistor outputs × 2
	Max. load current		Max. 150 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
	OFF state voltage		Max 2.0 V (with a cable length of 5 m 16.40')
	Leakage current		Max. 0.5 mA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
AUX (Non-safety related output)	Output		Transistor output
	Number of outputs		2
	Max. load current		50 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
External input (Short-circuit current)	Safety input		Approx.1.5 mA × 2
	Reset/EDM input		Approx. 10 mA × 1
	Lock control input		Approx. 2.5 mA × 2
	OSSD operation switching input		-
Applicable Standards (Safety)			EN 61508, IEC 61508(SIL2/SIL3) EN 62061, IEC62061(SIL CL2/SIL CL3) EN ISO13849-1: 2015(PLd, Category 2/PLe, Category 4) EN ISO14119(Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
Protection circuit			Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage		24 V DC ±20 % (Ripple P-P 10 % or less, Class2)
	Power consumption		3.4 W^*6
Environmental resistance	Enclosure rating		IP65/67(IEC60529), IP69K(ISO 20653) (TÜV SÜD certified), Enclosure Type 3/4X/12/13 (NEMA250)
	Operating ambient temperature		-20°C to +55C° -4°F to 131°F (No freezing)
	Operating relative humidity		5% to 95%RH
	Storage temperature		-25°C to +70°C -13°F to 158°F (No freezing)^*7
	Storage relative humidity		5% to 95%RH
	Vibration resistance		10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance		30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Sensor main unit	Case	SUS304, PPS, PBT, PAR, PA66, NBR
		Lock	Aluminum alloy, Zinc die cast (Nickel chrome plating)
		Cable	PVC
	Actuator	Case	PPS, PBT, NBR
		Lock	Aluminum alloy, SUS303
Weight			Approx. 380 g
^1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). ^2 If the OSSD operation is open/close link mode, Detect→ Not detect: 20 ms + 2 ms × (number of units cascaded -1), Not detect → Detect: 30 ms + 25 ms × (number of units cascaded -1) ^3 430 ms when locked at the same time the actuator is detected. ^4 Acceptable door operation frequency is 3 Hz if the OSSD operation is open/close link mode. In that case, operation distance is Sao(OFF→ ON) = 3 mm 0.12", Sar(OFF→ ON) = 10.5 mm 0.41". ^5 Do not apply excessive torque (0.45N·m or higher). ^6 Power consumption temporarily increases (Max. 10.5 W, Approx. 0.2 s) when the lock control input(s) is(are) turned ON. After that, current consumption will be within the specification. ^*7 When stored for a long period of time, please store it at a temperature of 55°C 131°F or lower.

Keyence SV2-C5BG Keyence

€0,00

Sold Out

Specifications

Model				SV2-C5BG
Type				Motor power cable, Hi-flex robotic cable
Length				5 m 16.4'
Note				for 200 W / 400 W motor

Keyence KV-N24AR Keyence

€450,95

Only 5 units left

Specifications

Model				KV-N24AR
General specifications	Power voltage			100 to 240 VAC (+10%/-15%)
	Operating ambient temperature			0 to 55°C 32 to 131°F (no freezing)^1 ^2
	Operating ambient humidity			5 to 95% RH (no condensation)^*1
	Operating environment			As little dust and corrosive gas as possible
	Noise immunity			1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case
	Insulation resistance			50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case)
	Output power supply voltage			24 VDC (±10%; output capacity: 0.6 A)
	Storage temperature			−25 to +75°C −13 to +167°F
	Vibration resistance	Intermittent vibration	Frequency: 5 to 9 Hz	Amplitude: 3.5 mm 0.14"^3^4
			Frequency: 9 to 150 Hz	Acceleration: 9.8 m/s² 32.2'/s²^3^4
		Continuous vibration	Frequency: 5 to 9 Hz	Amplitude: 1.75 mm 0.07"^3^4
			Frequency: 9 to 150 Hz	Acceleration: 4.9 m/s² 16.1'/s²^3^4
	Shock resistance			Acceleration: 150 m/s² 492.1'/s², application time: 11 ms, three times in each of the X, Y, and Z directions
	Operating altitude			2000 m 6561.7' or less
	Overvoltage category			AC: II, DC: I
	Pollution degree			2
Performance specifications	Calculation control method			Program storage method
	I/O control method			Refresh method
	Program language			Expanded ladder, KV Script, mnemonic
	Number of instructions			Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions
	Instruction execution speed			Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum
	Program capacity			8k steps
	Maximum number of attachable I/O units			8
	Maximum number of I/O points			256 (excluding the base unit I/O)
	Input relay/Output relay/Internal auxiliary relay	R		Total of 9600 points 1 bit (R000 to R59915)
	Link relay	B		8192 points 1 bit (B0 to B1FFF)
	Internal auxiliary relay	MR		9600 points 1 bit (MR000 to MR59915)
	Latch relay	LR		3200 points 1 bit (LR000 to LR19915)
	Control relay	CR		1440 points 1 bit (CR000 to CR8915)
	Timer	T		512 points 32 bit (T0 to T511)
	Counter	C		256 points 32 bit (C0 to C255)
	Data memory	DM		32768 points 16 bit (DM0 to DM32767)
	Link register	W		16384 points 16 bit (W0 to W3FFF)
	Temporary memory	TM		512 points 16 bit (TM0 to TM511)
	High-speed counter	CTH		2 points (CTH0 to CTH1), 32-bit automatic reset counter^5 (Input response: 100 kHz per single phase, 50 kHz per phase difference)^6
	High-speed counter comparator	CTC		4 points (CTC0 to CTC3), 32 bits, two points per high-speed counter
	Index register	Z		12 points 32 bit (Z01 to Z12)
	Control memory	CM		9000 points 16 bit (CM0 to CM8999)
	Base unit I/O			Input: 14 points, output: 10 points, Input common: 1 point, Output common: 5 points
	Number of comments and labels that can be stored in the main unit	Device comment		20000 When a maximum-length ladder program is written with no labels.
		Label		28000 When a maximum-length ladder program is written with no device comments.
	Power off hold function	Program memory		Flash ROM can be rewritten 10000 times
		Device		Nonvolatile RAM^*7
	Self-diagnosis function			CPU error, RAM error, and other problems
Input specifications	Relay number			General input: R000 to R003, R008 to R013 (10 points), High-speed A-phase and B-phase input: R004 to R007 (2 channels, 4 points in total)
	Input mode			24 VDC input (open collector)
	Maximum input voltage			26.4 VDC
	Rated input voltage			24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA^*8)
	Minimum ON voltage			19 VDC
	Maximum OFF current			1.5 mA
	Common method			General input: All points/1 common (1 terminal), High-speed A-phase and B-phase input: Shared common for all points (shared with general input)
	Circuit delay time			General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), ON to OFF: Max. 50 μs (Typ. 15 μs) High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs) ^*9
	Input time constant			Normal: 10 ms, When the HSP instruction is used: 10 μs When CR2305 is turned ON: 10 μs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.^*9
				Input time constant setting 10 µs: Digital filter 1.6 to 2 µs Input time constant setting 20 µs: Digital filter 9 to 12 µs Input time constant setting 110 µs: Digital filter 90 to 93 µs Input time constant setting 500 µs: Digital filter 300 to 400 µs Input time constant setting 1 ms: Digital filter 800 to 900 µs Input time constant setting 2.5 ms: Digital filter 2.3 to 2.4 ms Input time constant setting 5 ms: Digital filter 4.0 to 4.5 ms Input time constant setting 10 ms: Digital filter 9 to 9.5 ms
	Response frequency			(High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50%
Output specifications	Relay number			R500 to R509 (10 points)
	Output mode			Relay
	Rated load			250 VAC/30 VDC, 2 A
	Common method			2 to 4 points/1 common
	ON/OFF response time			10 ms or less
	ON resistance			50 mΩ or less
	Minimum applicable load			100 μA/100 mVDC
	Relay life			Electrical: 100000 cycles or more (20 cycles/minute), Mechanical: 20000000 cycles or more
	Relay replacement			Impossible
Built-in serial port	Interface	Communication standard		RS-232C
		Connection		Modular connector
	Transmission specifications RS-232C	Baud rate		1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
		Transmission method		Full duplex
		Data format	Start bit	1 bit
			Data bits	7 bits, 8 bits
			Stop bits	1 bit, 2 bits
		Error detection	Parity	Even, odd, none
		Transmission distance		15 m 49.2'
		Number of transmission units		1
	Indication			SD (green), RD (red)
Internal current consumption				79 VA
Weight				Approx. 500 g
^1 The range guaranteed as a system (excluding items specially noted for the units and cassettes). ^2 The temperature below the unit center (30 mm 1.18") inside a control panel. ^3 These specifications correspond to situations in which the unit is mounted on a DIN rail and in which the unit is mounted on the panel directly. ^4 Conforms to JIS B 3502 and IEC61131-2, Scan times: 10 times (100 minutes) in each of the X, Y, and Z directions ^5 You can also configure the settings so that automatic reset is not used. ^6 Only open collectors are supported. Line drivers are not supported. ^7 You can set the target device by clicking “CPU system setting” and then “Power off holding” in KV STUDIO. ^8 Reference value of input current. ^*9 The input response time corresponding to the input time constant can be calculated as shown below. (Response time) = (Circuit delay of the input circuit) + (Delay by the digital filter) Example: Maximum response time when the input time constant is set to 500 μs OFF to ON: 30 μs (circuit delay) + 400 μs (digital filter) = 430 μs ON to OFF: 50 μs (circuit delay) + 400 μs (digital filter) = 450 μs

Keyence RK-10IMC Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DBB13 Keyence

€360,95

Only 5 units left

Specifications

Model				CA-DBB13
Type				Bar Light
LED color				Blue
Diffusion plate				OP-42282
Polarizing plate				OP-42280
Power consumption				7.3 W
Input voltage				12 VDC
Weight				Approx. 90 g

Keyence EX-510 Keyence

€1.104,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89064 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R40H-R Keyence

€3.900,95

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R26L Keyence

€1.993,95

Only 5 units left

Specifications

Model			GL-R26L
Detection capability			ø1.77" ø45 mm
Total length			40.94" 1040mm
No. of beam			26
Detection height			39.37" 1000mm
Protection height			42.72" 1085mm
Beam axis spacing/Lens diameter			40 mm / ø5 1.57" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	7.2
		OFF→ON	49.6^*2
		All blocked→ON	65.7^*3
	Optical synchronization system (Channel A or B)	ON→OFF	9.8
		OFF→ON	53.5^*2
		All blocked→ON	76.1^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	59
		Receiver	77
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1440 g
	Receiver		1450 g
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence GL-VM47FN Keyence

€0,00

Sold Out

Specifications

Model			GL-VM47FN
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			47
Total length			480 mm 18.90"
Detection height			460 mm 18.11"
Protection height			484 mm 19.06"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.8
		OFF→ON	48.2 ^*3
		All blocked→ON	56.2 ^*4
	With channel A or B	ON→OFF	16.9
		OFF→ON	69.1 ^*3
		All blocked→ON	92.7 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	86 ^*5
		Receiver	96 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	57 ^*5
		Receiver	61 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		320 g 11.29 oz
	Receiver
	Total		640 g 22.59 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence OP-87904 Keyence

€157,95

In stock, 12 units

Specifications

Model				OP-87904
Type				Cable between sensor head amplifier
Length				5 m 16.40'
Weight				Approx. 360 g

Keyence SJ-H300 Keyence

€0,00

Sold Out

Specifications

Model		SJ-H300
Type		H
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method/applied voltage		Pulse AC method, ±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or contact point signal without voltage
Control output		NPN photo relay, Maximum 100 mA max. (40 V or less)
Major functions		Condition alarm, ion level alarm, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*2
Effective length		3000 mm 118.11" ^*3
No. ofelectrodes		72
Static elimination bar length		2960 mm 116.54"
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	500 mA (at 24 V), 350 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main unit	ABS/PC
Weight	Static elimination bar	3250 g 114.64 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" (22 Hz), 600 mm 23.62" (10 Hz), 1500 mm 59.06" (1 Hz) Operating ambient temperature: 0 to +40°C 32 to 104°F Operating ambient humidity: 35 to 65% RH 0.3 m/s 1.3'/s downflow ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence VT-H1A-DL Keyence

€459,95

Only 1 unit left

Specifications

Model				VT-H1A-DL
Supported OS				Windows11/10
Free space on hard disk				VT-H1A-DL (US version): 4 GB min. ^*1
Display				1024 × 768 pixels min. High color (16-bit) or higher
Graphics				VRAM video card with 128 MB or higher memory that supports Microsoft DirectX^® 9.0 c or higher ^*2
Interface				USB port, Ethernet port
Remark				Download version For editing on VT5/VT3/VT2. Includes speech synthesis database.
^1 When using the speech synthesis database, maintain the following additional free space on the hard disk: English: 1.2 GB min., Japanese: 1.5 GB min., Chinese: 600 MB min., Korean: 1.3 GB min., Spanish: 1.3 GB min. ^2 The VT simulator requires a VRAM video card with 256 MB or higher memory.

Keyence ER-GM12P Keyence

€0,00

Sold Out

Specifications

Model		ER-GM12P
Type		General-purpose all-metal shielded type Screw type M12 Cable PNP output Mid-Range
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		4 mm 0.16" ±10% ^*2
Response frequency		150 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		12 × 12 mm 0.47" × 0.47"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303, Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 75 g 2.65 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence CA-LHW25 Keyence

€0,00

Sold Out

Specifications

Model		CA-LHW25
Focal point		25 mm 0.98"
F-stop		F1.4 to F16 ^*1
Minimum WD		0.3 m 0.98'
Resolving power		120 cycles/mm at center, 63 cycles/mm on periphery
Compatible image sensor size		1"
TV distortion		-1.0 % (-0.5 %, -0.3 %)^*2
Filter size		35.5 mm 1.4" P0.5
Mount		C-mount
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	80% RH or less (No condensation)
Weight		Approx. 130 g
^1 When used with a line camera, an aperture of around F 2.8 is recommended. This improves the peripheral resolving power. ^2 Indicates specification for compatible image sensors size. Value in parenthesis applies to 2/3" or 1/2" image sensor size.

Keyence OP-88445 Keyence

€0,00

Sold Out

Specifications

Model				OP-88445
Overview				The following cables include a M12 8-pin connector on one side and a M12 4-pin connector on the other.
Cable end				M12 8-pin - M12 4-pin
Length				5 m 16.4'
Material				PVC, Brass (Nickel plated)
Weight				Approx. 150 g 5.29 oz

Keyence OP-84231 Keyence

€341,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-M070C Keyence

€0,00

Sold Out

Specifications

Model		SJ-M070C
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Supply pressure range		0.2 MPa max.
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alarm output
	Condition alarm output
Effective length		324 mm 12.76"^*2
Total length		380 mm 14.96"^*3
Rating	Power voltage	24 VDC ±10%
	Current consumption	450 mA max.
Environmental resistance	Ambient temperature	0 to +40°C 32 to +104°F
	Relative humidity	35 to 65%RH (no condensation)
Weight		Approx. 720 g
^1 Measured under the following conditions: [SJ-M030G/M070G] Air purge: 3 NL/min per electrode Down flow: 0.3 m/s 0.98 ft/s Operating distance: 50 mm 1.97"(50 Hz), 600 mm 23.62" (8 Hz), 1500 mm 59.06"(1 Hz) [SJ-M030C/M070C] Air purge: None Down flow: 0.3 m/s 0.98 ft/s Operating distance: 50 mm 1.97"(50 Hz), 600 mm 23.62" (8 Hz), 1500 mm 59.06"(1 Hz) ^2 Effective length indicates static elimination range at 50 mm 1.97" operating distance. ^*3 Overall length includes mounting brackets.

Keyence VR-H4J Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88387 Keyence

€0,00

Sold Out

Specifications

Model				OP-88387
Applicable product				KV-CA1H, KV-CA1W