Machine Vision Systems

Keyence AP-32A Keyence

€438,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MP-F20MDP Keyence

€0,00

Sold Out

Specifications

Model				MP-F20MDP
Type				Manual drain cup
Connection diameter				NPT1/2 (15A)
Material				Polycarbonate

Keyence CA-DLR10 Keyence

€534,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-B300AS Keyence

€0,00

Sold Out

Specifications

Model				SV2-B300AS
General specifications	Applicable servo amplifier			SV2-300L2, SV2-500L2
	Rated output			SV2-300L2: 2.4 kW, SV2-500L2: 2.9 kW
	Rated torque			SV2-300L2: 15.1 N·m ^1 SV2-500L2: 18.6N·m ^1
	Instant maximum torque			SV2-300L2: 45.1 N·m, SV2-500L2: 54.0 N·m
	Rated current			SV2-300L2: 19.6 Arms, SV2-500L2: 23.8 Arms
	Instant maximum current			SV2-300L2: 56 Arms, SV2-500L2: 70 Arms
	Rated rotation speed			1500 min^-1
	High rotation speed			3000 min^-1
	Torque constant			0.848 N·m/Arms
	Rotor moment of inertia			53.9 ×10^-4kg·m²
	Rated power rating			SV2-300L2: 42.2 kW/s, SV2-500L2: 64.2 kW/s
	Rated angle acceleration			SV2-300L2: 2800 rad/s², SV2-500L2: 3450 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4'/s² (forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			phase F
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			SV2-300L2: 3 x, SV2-500L2: 5 x
	Approx. weight			19.5 kg
Electromagnetic brake specifications	Capacity			18.5 W
	Rated voltage			24 VDC +10%/-0%
	Rated current (@20°C 68°F)			0.77 A
	Holding torque			43.1 N·m
	Release time			170 ms ^*2
	Operating time			100 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence LS-7601 Keyence

€2.151,95

Only 10 units left

Specifications

Model			LS-7601^*1
Type			High-performance
No. of connectable sensor heads			2 (fully compatible for all head types)
Display	Measurement display		TFT 5.5-inch LCD display
	Minimum display unit		0.01 µm to 100 µm (7-level selectable)
	Display range		±99.99999 to ±9,999.9 mm ±3.937" to ±393.7" (Linked to minimum display unit setting, mm/µm selectable)
	Measurement position monitor		Monitor image (When the measuring head with the monitor function is connected.)
	Tolerance check output display		5-level LCD indicator
Input terminal block	Synchronous 1, 2 input		Non-voltage input for OUT1
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Statistics 1, 2 input
	Program selection input		Non-voltage input x 4 inputs
Output terminal	Analog voltage output		±10 V x 2 outputs
	Alarm output		NPN open-collector output (N.C.)
	Total judgment output		NPN open-collector output for OUT1
	Comparator ready output
	Strobe 1, 2 output
Connector I/O	SUB mode	Statistical processing output	NPN open-collector output x 2 outputs^*2
		Function output	Selectable from focus, area check, and differential, NPN open-collector output x 2 outputs^*2
		5-level comparator output	NPN open-collector output for OUT2^*2
		Comparator ready output
		Strobe output
	BCD mode	BCD output	Measurement data output (Sign + 7 digits), OUT1/OUT2 selectable, NPN open-collector output^*2
		BCD selection output	NPN open-collector output^*2
		BCD selection input	Non-voltage input^*2
	Statistical processing input		Non-voltage input for OUT2
	Synchronous input
	Reset input
	Auto-zero input
Interface	RS-232C		Measurement data output and control I/O, printer (Baud rate can be selected up to 115,200 bps.)
Video output			Conforming to the NTSC system (PIN connector)
Major functions			Simultaneous measurement, Area designation, Calculation, Averaging, Calibration, 16-program memory, Measurement modes, Auto-zero, Print-out, Abnormal value elimination, Transparent object measurement, Measurement point display, Group comparison, Unacceptable value history, Trend display, Statistical processing, Mutual interference prevention, Application function, etc.
Rating	Power voltage		24 VDC ±10 %^*3
	Power consumption		1.2 A max.^*3
Environmental resistance	Enclosure rating		IP64 (Panel surface only)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 1,010 g
^1 The rating of the NPN open-collector inside the terminal block is: 100 mA max. (40 V max.), residual voltage of 0.5 V max. The rating of the NPN open-collector inside the connector I/O is: 30 mA max. (30 V max.), residual voltage of 0.5 V max. The rating of non-voltage input is: ON voltage of 1 V max., OFF current of 0.6 mA max. ^2 Either SUB mode or BCD mode can be selected. ^*3 AC power supply can be used when the LS-S11 (AC power supply stand) is connected.

Keyence CA-LA4 Keyence

€0,00

Sold Out

Specifications

Model				CA-LA4
Focal point				4.5 mm 0.18"
F-stop range (aperture)				F1.6 to F16
Minimum WD				0.05 m 0.16'
Mount				C-mount
Filter size				M72 × P0.75
Compatible image sensor size				1/1.8"
TV distortion				0.20%
Resolving power				120 cycles/mm at center, 100 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 216 g 7.62 oz

Keyence OP-87827 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SK-H050 Keyence

€1.638,95

Only 8 units left

Specifications

Model			SK-H050
Charge potential measurement	Measurement mode		High-precision mode, Wide-range mode
	Measuring distance	High-precision mode	25 mm 0.98"
		Wide-range mode	100 mm 3.94"
	Measuring range	High-precision mode	±2 kV
		Wide-range mode	±50 kV
	Measuring accuracy	High-precision mode	±10 V^*1
		Wide-range mode	±100 V^1^2
	Display resolution		0 to 999 V : 1 V, 1.00 to 9.99 kV : 0.01 kV. 10.0 kV and higher : 0.1 kV
	Sampling cycle		Approx 1.4 ms
Temperature measurement	Measuring range		0 to +40℃ 32°F to 104°F
	Measuring accuracy		±1°C 30.2 to 33.8°F^*3
	Display resolution		0.1°C 32.2°F
	Sampling cycle		1 s
Humidity measurement	Measuring range		10 to 85% RH
	Measuring accuracy		±5% RH^*3
	Display resolution		1% RH
	Sampling cycle		1 s
Charge monitor function	Ion balance measuring mode	Ion balance measuring range	±1 kV^*4
		Measured voltage display resolution	±10 V^4^5
			1 V^*4
	Static elimination time measuring mode	Charge voltage	±1400 V^*4
		Static elimination time display resolution	0.1 s^*4
		Measuring time	0 to 99 s^*4
Laser class			Class 1 Laser Product (IEC60825-1 : 2014, FDA (CDRH) Part 1040.10^*6)
PC interface			USB 2.0 Full Speed
Power supply			2 AA alkaline dry-cell batteries
Power supply	Operating time		8 hours (in charge potential measuring mode)
Environmental resistance	Ambient temperature		0 to +40 °C 32 to 104 °F (No freezing or condensation)
	Relative humidity		10 to 85 % RH (No condensation)^*7
Material			SK-H050 : PC-ABS, PC, SUS/SK-H055 : PC, SUS, PTFE, PVC
Weight			SK-H050: Approx. 240 g, SK-H055: Approx. 220 g
^1 Within ±100 V when using high-precision mode; within ±1 kV when using wide-range mode. In other ranges, display value has an accuracy of ±10% (display value). Values are obtained from measurements with a response time of 0.8 seconds. ^2 Measuring accuracy is satisfied in the range of ±30 kV. ^3 25°C 77°F, 50% RH. ^4 SK-H055 is required. ^5 Within ±100 V. In other ranges, display value has an accuracy of ±10% (display value). ^6 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^*7 10 to 60 % RH when using SK-H055.

Keyence FU-V84 Keyence

€305,95

Only 10 units left

Specifications

Model		FU-V84^*1
Type		Vacuum-side fiber unit (thrubeam model heat resistant to 350°C 662°F, M4 straight type)
Detecting method		Thrubeam
Fibre unit length		1 m39.37"
Minimum bend radius		R25 mm0.984" or more
Minimum detectable object		Opaque material with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +350 °C -40 to 662 °F
Weight		Approx. 55 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence SJ-H156C Keyence

€0,00

Sold Out

Specifications

Model		SJ-H156C
Type		HC
Ion generation method		Corona discharge
Structure		Shock-proof, resistance-coupled
Voltage application method/applied voltage		Pulse AC method/±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Cleanliness		ISO 14644-1 Class 2 ^*2
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or non-voltage contact signal
Control output		NPN type photorelay, 100 mA max. (at 40 V max.)
Major functions		Condition alarm output, ion level alarm output, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*3
Effective length		1560 mm 61.42" ^*4
No. ofelectrodes		24
Static elimination bar length		1520 mm 59.84"
Rating	Power voltage	24 VDC-36 V±10%
	Current consumption	500 mA (at 24 VDC)/350 mA (at 36 VDC)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32.0°F to 104.0°F
	Relative humidity	35 to 85% RH (No condensation)
Material	Electrode probe	Silicon
	Main unit	ABS resin/PC
Weight	Static elimination bar	1550 g 54.67 oz
^1 Value measured under the following conditions: Operating distance: 300 mm 11.81" Air supply pressure: 0.2 MPa Frequency: 68 Hz Ambient operating temperature: 0 to +40°C 32.0°F to 104.0°F Ambient operating humidity: 35 to 65%RH Measurement position: Center of bar Under a 0.3 m/s 1.0 ft/s downflow ^2 Contact KEYENCE for detailed conditions. ^3 Contact KEYENCE when using the air purge function with intermittent air supply. ^*4 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence OP-88369 Keyence

€0,00

Sold Out

Specifications

Model		OP-88369
Average active efficiency		89% or more
Efficiency at low load (10%)		79% or more
No-load power consumption		0.15 W
Dimensions		153 × 68 × 35 mm (excluding the cable)
Rating	Input	100 to 240 VAC 50/60 Hz 150 W
	Output	24 VDC, 5 A (120 W max.)
Weight		Approx. 650 g (excluding the AC cable)

Keyence KV-N3AM Keyence

€565,95

Only 5 units left

Specifications

Model			KV-N3AM
Conversion speed			80 μs/channel ^*1
Conversion			A/D conversion, D/A conversion
Points			A/D conversion : 2 (single end), D/A conversion : 1
Range/resolution	Voltage	-10 V to +10 V	A/D conversion : 1/8000 2.5 mV, D/A conversion : 1/8000 2.5 mV ^*2
		0 to 10 V	A/D conversion : 1/4000 2.5 mV, D/A conversion : 1/4000 2.5 mV ^*2
		0 to 5 V	A/D conversion : 1/4000 1.25 mV, D/A conversion : 1/4000 1.25 mV ^*2
		1 to 5 V	A/D conversion : 1/3200 1.25 mV, D/A conversion : 1/3200 1.25 mV ^*2
	Current	0 to 20 mA	A/D conversion : 1/4000 5 μA, D/A conversion : 1/4000 5 μA ^*2
		4 to 20 mA	A/D conversion : 1/3200 5 μA, D/A conversion : 1/3200 5 μA ^*2
Conversion precision	Voltage	Without temperature compensation	A/D conversion : ±0.3% of F.S. (at 25°C ±5°C 77°F ±9°F) ±0.5% of F.S. (at 0 to 55°C 32 to 131°F) D/A conversion : ±0.3% of F.S. (at 25°C ±5°C 77°F ±9°F) ±0.5% of F.S. (at 0 to 55°C 32 to 131°F)
		With temperature compensation	A/D conversion : ±0.3% of F.S. (at 0 to 55°C 32 to 131°F) D/A conversion : ±0.3% of F.S. (at 25°C ±5°C 77°F ±9°F) ±0.5% of F.S. (at 0 to 55°C 32 to 131°F)
	Current	Without temperature compensation	A/D conversion : ±0.4% of F.S. (at 25°C ±5°C 77°F ±9°F) ±0.6% of F.S. (at 0 to 55°C 32 to 131°F) D/A conversion : ±0.3% of F.S. (at 25°C ±5°C 77°F ±9°F) ±0.5% of F.S. (at 0 to 55°C 32 to 131°F)
		With temperature compensation	A/D conversion : ±0.4% of F.S. (at 0 to 55°C 32 to 131°F) D/A conversion : ±0.3% of F.S. (at 25°C ±5°C 77°F ±9°F) ±0.5% of F.S. (at 0 to 55°C 32 to 131°F)
Input resistance	Voltage		A/D conversion : 5 MΩ
	Current		A/D conversion : 250 Ω
Absolute maximum input	Voltage		A/D conversion : ±15 V
	Current		A/D conversion : ±30 mA
Isolation method	Between analog input		Isolated (photocoupler, transformer)
A/D , D/A conversion unit	Isolation method	Between Analog input - output	Non-isolated
Isolation method	Between analogu input channels		A/D conversion : Non-isolated
Minimum load resistance	Voltage		D/A conversion : 1 kΩ
Maximum load resistance	Current		D/A conversion : 600 Ω
Special functions			▼A/D conversion Input range switching, temperature fluctuation compensation enabling/disabling, channel skip, scaling, special data offset, peak-/bottom-hold, zero clip, zero shift, comparator, averaging (time-specified, count-specified,moving average), disconnection detection ▼D/A conversion Output range switching, output data offset, scaling, error hold, upper/lower limit alarm, output limit, channel skip, output in PROG mode
Internal current consumption			120 mA or less
Weight			200 g
^1 When the temperature fluctuation compensation is used, the temperature fluctuation compensation time of 80 μs will be added regardless of the number of channels being used. ^2 For the possible measuring range for out-of-range input, refer to “A/D and D/A conversion table” in “KV-N3AM User’s Manual.”

Keyence OP-87625 Keyence

€169,95

Only 8 units left

Specifications

Model				OP-87625
Length				2 m 6.6'
Material				Cable: PVC Connector: Zinc nickel plating
Weight				Approx. 70 g

Keyence FU-31 Keyence

€121,95

Only 8 units left

Specifications

Model		FU-31^*1
Beam emitting direction		Side
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø1.0×2
Minimum bend radius		R10 mm0.394"
Minimum detectable object		Gold wire with a diameter of 0.005 mm0.0002" ^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 5 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence SJ-E084L Keyence

€0,00

Sold Out

Specifications

Model		SJ-E084L
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 V
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±30 V^*1
Installation distance		50 to 2000 mm 1.97" to 78.74"
Control input	Static elimination stop input	NPN open collector or contact point signal without voltage
Control output	Ion level warning, condition warning, alarm output	NPN open collector, Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Communication function		Remote control communication
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc 1/8
Air supply pressure		0.1 MPa to 0.5 MPa^*2 (recommended air pressure of 0.2 MPa)
Effective length		920 mm 36.22"^*3
Total length		800 mm 31.50"
No. ofelectrodes		13
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	700 mA (at 24 V), 500 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		1070 g 37.74oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" or more, Air supply pressure: 0.2 Mpa, Frequency: The highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^*3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence AP-V41AWP Keyence

€357,95

Only 2 units left

Specifications

Model		AP-V41AWP
Type		Amplifier Unit, PNP
Applicable sensor head		AP-41M, AP-41, AP-43, AP-44
Set and display range		-15 to +110 % of F.S.^*1
Display		4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18"), AI indicator (green), Display cycle: 10 times/s
Operation indicator		Red LED x 2 (corresponding to control output 1 and 2)
Repeatability		±0.2 % of F.S.
Display resolution		AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg AP-43: Standard mode 0.01 kgf/cm², High-resolution/Focus mode 0.02 Psi
Power consumption	Normal	12 V: 720 mW (60 mA) max., 24 V: 960 mW (40 mA) max.
	Eco mode	12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max.
Display temperature characteristic		±1 % of F.S. max.
Hysteresis		Variable (Standard: 0.5 % of FS; high-resolution/focus mode: 0.1 % of F.S.)
Response time (Chattering prevention function)		1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable)
I/O	Analog output	1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)
	Zero-shift input	Input time: 2 ms or more. (or analog output selectable)
	Control output	PNP open collector 100 mA max. (at 30 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate
Accessories		Mounting bracket, Head connector
Weight		Approx. 80 g (with 2-m 6.6' cable)
^*1 The focus range applies while in focus mode only.

Keyence OP-88412 Keyence

€407,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DSW7 Keyence

€433,95

Only 10 units left

Specifications

Model				CA-DSW7
Type				Back Light
LED color				White
Power consumption				18 W
Input voltage				12 VDC
Weight				Approx. 90 g

Keyence MD-F3200 Keyence

€18.164,95

Only 2 units left

Specifications

Model		MD-F3200
Type		Marking unit (Controller + Head) 30 W, Standard area
Console (sold separately)		MC-P1
Marking method		XYZ 3-axis simultaneous scanning method
Marking laser	Type	Yb: Fiber laser (Class 4 laser product; IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1)
	Wavelength	1090 nm
	Output	30 W
Applicable regulations		EU directive (EMC directive, machinery directive, RoHS directive), EN standard (EN 55011, EN ISO 11553-1, EN 60204-1, EN 60825-1, EN 61000-6-2, EN 50581), CSA and UL standards (CAN/CSA C22.2 No. 61010-1-12, UL 61010-1), North America regulations (FCC Part 15B, ICES-001 Class A), China RoHS
Pulse frequency		60 to 120 kHz
Guide laser/Working distance pointer		Semiconductor laser, Wavelength: 655 nm, Output: 1.0 mW (Class 2 laser product; IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1)
Marking area		125 × 125 × 42 mm 4.92" × 4.92" × 1.65"
Standard working distance (±variable width)		168 mm (±21 mm) 6.61" (±0.83")
Marking resolution		2 µm 0.08 Mil
Scan speed		Max. 12000 mm/s 472.44"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), User fonts, True Type fonts
	Barcode	CODE39, ITF, 2of5, NW7 (CODABAR), JAN, CODE128, EAN, UPC-A, UPC-E, CODE93
	2D code	QR code, Micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo CAD data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary/moving marking (constant speed/encoder)
	Character size (marking height/width)	0.1 to 125 mm 0.004" to 4.92"
	No. of registered programs	Max. 2000 programs
	No. of program blocks	256 blocks
I/O (Input/output)		Terminal block I/O, MIL connector I/O
Interface		RS-232C, USB 2.0, Ethernet (100BASE-TX/10BASE-T)^*2
Head installation direction		All directions
Head cable length		4.0 m 13.1'
Cooling method		Controller: Forced air cooling, Head: Natural air cooling
Rated voltage and power consumption		100 to 120 VAC or 200 to 240 VAC ± 10 %, 50/60 Hz, Max. 550 VA
Environmental resistance	Enclosure rating	IP64 (Head)
	Pollution degree	2
	Overvoltage category	II
	Ambient temperature for storage	-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature	0 to +40 °C 32 to 104 °F
	Ambient humidity for storage	30 to 85 % RH (No condensation)
	Relative humidity
Weight		Controller: 24.4 kg Head: 6.7 kg Console: 2.0 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 The USB port is designed for use with USB memory sticks, barcode readers, mouses (A connector), and Marking Builder 3 (ActiveX) (B connector). The Ethernet port supports communication with Marking Builder 3 (ActiveX), TCP/IP communication, PROFINET connection, and EtherNet/IP™ connection.

Keyence CV-X100RP Keyence

€9.787,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-H500CX Keyence

€1.379,95

Only 7 units left

Specifications

Model		CA-H500CX
Image element		Color CMOS, 16× high-speed reading using square-pixel
Unit cell size		3.45 µm × 3.45 µm 0.14 Mil × 0.14 Mil
Valid pixel count		5 megapixel mode: 2432 (H) × 2040 (V), 2 megapixel mode: 1600 (H) × 1200 (V)
Image size		Equivalent to 2/3"
Scanning system		Progressive 5 megapixel mode: 29.2 ms 2 megapixel mode: 11.7 ms
Pixel transfer frequency		195 MHz
Transfer system		Digital serial transfer
Electronic shutter		Can be set to 0.017 to 100 msec by specifying the following numerical inputs: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 1/50000
Lens mount		C-mount
Environmental resistance	Ambient temperature	0 to 40°C 32 to 104°F
	Relative humidity	85% RH or less
Weight		Approx. 280 g (not including lens)

Keyence KV-M32G Keyence

€546,95

Only 1 unit left

Specifications

Model				KV-M32G
Type				microSD card
Memory elements				industrial grade
Type				SDHC standard
Memory capacity				32 GB

Keyence ER-GL30N Keyence

€0,00

Sold Out

Specifications

Model		ER-GL30N
Type		General-purpose all-metal shielded type Screw type M30 Cable NPN output Long-Range
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		20 mm 0.79" ±10% ^*2
Response frequency		30 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		60 × 60 mm 2.36" × 2.36"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 175 g 6.18 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence GL-R64HG Keyence

€2.382,95

Only 8 units left

Buy the Keyence GL-R64HG Encoder - a precision rotary or linear position feedback device for motion control and positioning. Features high-resolution output, rugged construction, and standard interface protocols. The Keyence GL-R64HG is a direct replacement for existing encoder installations.