Machine Vision Systems

€0,00

Sold Out

Specifications

Model				OP-66849
Overview				Expansion cable for transmitter side of thrubeam unit.
Applicable product				LV-S Series thrubeam
Cable end				Loose wire
Length				20 m 65.62' roll

Keyence BL-180SO-7030 Keyence

€471,95

Only 6 units left

Buy the Keyence BL-180SO-7030 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence BL-180SO-7030 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence XC-T40E2 Keyence

€0,00

Sold Out

Specifications

Model		XC-T40E2
Rated voltage		125 VAC/DC
Rated current		1 A/pin
Ambient operating temperature		−40 to +80°C −40 to +176°F
Screw torque		0.5 N·m (max.)
Applicable wire diameter		AWG24 to 12
Environmental resistance	Insulation resistance	500 VDC, 500 MΩ or greater
	Withstand voltage	500 VAC, 1 minute, 1 mA or less

Keyence FS-V22R Keyence

€593,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SV2-B005AK Keyence

€0,00

Sold Out

Specifications

Model				SV2-B005AK
General specifications	Applicable servo amplifier			SV2-005L2
	Rated output			50 W
	Rated torque			0.159 N·m ^*1
	Instant maximum torque			0.557 N·m
	Rated current			0.55 Arms
	Instant maximum current			2.0 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.316 N·m/Arms
	Rotor moment of inertia			0.0475 ×10^-4kg·m²
	Rated power rating			6.40 kW/s
	Rated angle acceleration			40200 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			35 ×
	Approx. weight			0.6 kg
Electromagnetic brake specifications	Capacity			5.5 W
	Rated voltage			24 VDC ±10%
	Rated current (@20°C 68°F)			0.23 A
	Holding torque			0.159 N·m
	Release time			60 ms ^*2
	Operating time			100 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence CA-DRW5X Keyence

€1.031,95

Only 9 units left

Specifications

Model				CA-DRW5X
Type				High-Intensity LumiTrax^TM Light
LED color				White
Power consumption				34.5 W (during normal light emission)
Weight				Approx. 190 g

Keyence GL-R143F Keyence

€0,00

Sold Out

Specifications

Model			GL-R143F
Detection capability			ø0.55" ø14 mm
Total length			56.69” 1440mm
No. of beam			143
Detection height			55.91” 1420mm
Protection height			56.85” 1444mm
Beam axis spacing/Lens diameter			10 mm 0.39" / ø4 ø0.16"
Detecting distance			0.66 to 32.81' 0.2 to 10 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	19.9
		OFF→ON	68.6^*2
		All blocked→ON	116.4^*3
	Optical synchronization system (Channel A or B)	ON→OFF	30.2
		OFF→ON	84.1^*2
		All blocked→ON	157.6^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	81
		Receiver	98
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		2100 g
	Receiver
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence GS-MB13 Keyence

€0,00

Sold Out

Specifications

Model				GS-MB13
Type				Hinged door mounting bracket
Applicable model				for GS-M5 Series
Frame size				40 - 45 mm 1.57" - 1.77"
Weight				Approx. 130 g 4.59 oz

Keyence CB-PN100 Keyence

€4.667,95

Only 4 units left

Specifications

Model		CB-PN100
Type		PROFINET unit
Compatible network		PROFINET IO communication
Ethernet	Compliant standards	IEEE 802.3u^*1
	Transmission speed	100 Mbps, full duplex (100BASE-TX)
	Transmission media	STP or Category 5e or higher UTP
	Maximum cable length	100 m 328.1'
PROFINET IO	Supported functions	Data I/O communication, Record data communication
	Number of connectable PROFINET IO controllers	1
	Update Time	2 ms to 2,048 ms
	GSDML	Version 2.25
	Conformance class	Conformance Class A compliant
	Conformance test version	Based on Version 2.2.4
	Applicable protocol	LLDP, DCP
Rating	Power voltage	24 V ±10 % (supplied from the controller unit of the laser scanner)
	Current consumption	0.12 A or less
Weight		Approx. 470 g
^*1 Although this unit conforms to IEEE 802.3u and can establish 100 Mbps full duplex communication using AutoNegotiation function, it does not have AutoCrossOver and AutoPolarity functions that are normally required for the PROFINET IO standard. Select a straight or cross cable according to the Ethernet port of the device to be connected.

Keyence VT-P15 Keyence

€0,00

Sold Out

Specifications

Model				VT-P15
Type				15" protective sheet
Applicable product				for VT5-WX15/X15
Number included				Set of 5 sheets
Note				black, without logo

Keyence BT-ACG74 Keyence

€0,00

Sold Out

Specifications

Model		BT-ACG74
Dedicated AC adaptor specifications (OP-88389)	Input	100 to 240 VAC 50/60Hz 70VA
	Output	12 VDC 5.0 A maximum (60 W max.)
	Average active efficiency	89% or more
	Efficiency at low load (10%)	87% or more
	No-load power consumption	0.04 W
	Dimensions	110 x 62.0 x 31.5 mm (excluding the cable)
	Weight	Approx. 150 g (excluding the AC cable)
Dimensions		188 x 64 x 96 mm
Environmental resistance	Ambient temperature	0 to +40°C (No freezing)
	Relative humidity	20 to 85%RH (No condensation)
	Storage temperature	-20 to +70°C (No freezing)
	Storage relative humidity	20 to 85%RH (No condensation)
Weight		Approx. 470 g

Keyence XM-5000 Keyence

€0,00

Sold Out

Specifications

Model				XM-5000
Camera unit	Maximum measurement length	W × D × H		2000 × 1200 × 1000 mm 78.74" × 47.24" × 39.37"
	Indication error accuracy			±(7 + 9L/1000) μm ^*1
	Repeatability			±3 μm
	Minimum display unit	Distance		0.0001 mm 0.000004"
		Angle		0.0001 degrees
	Camera unit rotation angle	Theta rotation		±40°
		Tilt rotation		±25°
	Weight			Approx. 8 kg 17.64 lb
	External input	2 inputs		Maximum applied voltage: 26.4 V, ON voltage: 19 V or more, OFF current: 0.1 mA or less
	External output	7 outputs (OK/NG/FAIL/MEASURE/ERROR/TOUCH/STROBE)		Maximum applied voltage: 30 V, Maximum sink current: 50 mA, Leakage current: 0.1 mA or less, Residual voltage: 1.4 V or less (50 mA) / 1.0 V or less (20 mA)
	Probe	Number of possible connections		1
	Communication unit	WLAN communication		IEEE 802.11b/g/n
		USB communication		USB 3.0
		Infrared communication		945 nm
	Power supply			Supplied from dedicated AC adapter
	Rating	Rated voltage		24 VDC
		Current consumption		1.7 A
	Environmental resistance	Operating ambient temperature		10 to 35°C 50 to 95°F
		Operating ambient humidity		20 to 80% RH (no condensation)
Probe	Marker	Number of markers		7
	Light source			870 nm
	Applicable stylus			M5
	Display	Display method		OLED
		Resolution		96 × 39 pixels
	Hardware keys			MEASURE, OK, CANCEL, CAMERA, Trigger, Power
	Communication unit	WLAN communication		IEEE 802.11b/g/n
		USB communication		USB 2.0
		Infrared communication		945 nm
	Power supply	Battery		Dedicated lithium-ion battery pack
		Capacity		3350 mAh
		Charging time		Approx. 6 hours
		Continuous usage time		Approx. 8 hours
	Rating	USB connection	Rated voltage	5 VDC
			Current consumption	1 A
		Battery	Rated voltage	3.6 VDC
			Current consumption	1.25 A
	Environmental resistance	Operating ambient temperature		10 to 35°C 50 to 95°F
		Operating ambient humidity		20 to 80% RH (no condensation)
	Weight			Approx. 630 g 22.24 oz
^*1 Refer to ISO 10360-2 (in the range of 800 × 400 × 500 mm 31.50" × 15.75" × 19.69" and when the ambient temperature is 20°C ±1°C 68 ±1.8°F; “L” represents the measurement length (Unit: mm inch))

Keyence SJ-H108 Keyence

€0,00

Sold Out

Specifications

Model		SJ-H108
Type		H
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method/applied voltage		Pulse AC method, ±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or contact point signal without voltage
Control output		NPN photo relay, Maximum 100 mA max. (40 V or less)
Major functions		Condition alarm, ion level alarm, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*2
Effective length		1080 mm 42.52" ^*3
No. ofelectrodes		24
Static elimination bar length		1040 mm 40.94"
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	500 mA (at 24 V), 350 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main unit	ABS/PC
Weight	Static elimination bar	1250 g 44.09 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" (22 Hz), 600 mm 23.62" (10 Hz), 1500 mm 59.06" (1 Hz) Operating ambient temperature: 0 to +40°C 32 to 104°F Operating ambient humidity: 35 to 65% RH 0.3 m/s 1.3'/s downflow ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence FD-ECA1C Keyence

€636,95

Only 3 units left

Specifications

Model		FD-ECA1C
Type		M12 connector type^*1
Number of control outputs		2
Number of analog outputs		1
Number of external inputs
Power supply cable		Pigtail, 100 mm 3.94", M12 connector, 8 pins of which 6 are used pins used
Response time (90% response)		50 ms/100 ms/250 ms/1 s/5 s (selectable, initial value: 250 ms)^*2
I/O	Control outputs 1 and 2	Instantaneous flow/Accumulated flow/Alarm output/Pulse output NPN/PNP setting switchable, 100 mA or less total for two outputs, residual voltage: 2.5 V or less
	Analog output	Instantaneous flow 4-20 mA/0-20 mA (switchable), load resistance: 260 Ω or less
	External input	Zero flow/Origin adjust./Reset total Short-circuit current: 1.5 mA or less
Network compatibility		IO-Link^*3
Number of connectible units		─
Protection circuit		Protection against reverse power connection, output overcurrent, output surge, reverse output connection, and incorrect head cable wiring
Power supply	Power voltage	24 VDC +20%/-10% (including ripple), Class2/LPS
	Power consumption	1680 mW^*4excluding load current
Environmental resistance	Ambient temperature	−10°C to +55°C 14 to 131°F (no freezing)^*5
	Relative humidity	35%RH to 85%RH (no condensation)
	Vibration resistance	10 to 500 Hz, power spectral concentration: 0.816 G²/Hz, XYZ axes
	Shock resistance	100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material		Main unit: polycarbonate, FG terminal: copper/iron
Weight		Approx. 42 g 1.48 oz
^1 Ensure the cable length is 30 m 98.4' or less (20 m 65.6' or less when using IO-Link) for the M12 connector type. ^2 5 ms is added to the analog output response time and the response is set to 63%. ^3 IO-Link: Compatible with specification v1.1/COM3 (230.4 kbps). ^4 182 mA or less with the load included. ^*5 The ambient temperature to use varies depending on the number of adjacent cable type/M12 connector type units or depending on the number of expansion zero line type units added to the system. For 1 or 2 units, the temperature is 55°C 131°F. For 3 to 5 units, the temperature is 50°C 122°F. For 6 to 8 units, the temperature is 45°C 113°F. The prescribed values for the ambient temperature assume that the amplifier unit has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Keyence AH-614A Keyence

€0,00

Sold Out

Specifications

Model			AH-614A
Type			Sensor head
Amplifier unit			AS-421H
Shape			Thin, 14 × 30 × 4.8 mm
Measuring range			0 to 5 mm 0.20"
Analog output voltage	Output voltage		1.0 to 2.0V
	Straight line range		1.0 to 2.0mm 0.039" to 0.079"
	Impedance		100 Ω
	Resolution		0.2% of F.S.
	Linearity		±2.0% of F.S.
	Response		3.3 kHz (-3 dB)
Temperature fluctuation	Sensor head		0.06% of F.S./°C^*1
Temperature characteristics	Amplifier unit		0.1% of F.S./°C^*1
Rating	Power voltage		110/120/220/240 VAC ±10 %, 50/60 Hz
	Power consumption		6VA
Environmentalresistance	Enclosure rating	Sensor head	―
	Operating ambient temperature		-10 to +60°C 14 to 140°F
		Amplifier unit	0 to +50°C 32 to 122°F
Environmental resistance	Relative humidity		35 to 85 % RH (No condensation)
Weight	Sensor head		―
Weight (including cord)	Amplifier unit
^*1 When the distance between the sensor head and the target is within 50% of the measurement range.

Keyence OP-29859 Keyence

€18.173,95

Only 5 units left

Buy the Keyence OP-29859 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence OP-29859 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence IV-150CA Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-H156 Keyence

€0,00

Sold Out

Specifications

Model		SJ-H156
Type		H
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method/applied voltage		Pulse AC method, ±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or contact point signal without voltage
Control output		NPN photo relay, Maximum 100 mA max. (40 V or less)
Major functions		Condition alarm, ion level alarm, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*2
Effective length		1560 mm 61.42" ^*3
No. ofelectrodes		36
Static elimination bar length		1520 mm 59.84"
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	500 mA (at 24 V), 350 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32 to 104°F
	Relative humidity	35 to 85% RH (no condensation)
Material	Electrode probe	Tungsten
	Main unit	ABS/PC
Weight	Static elimination bar	1600 g 56.44 oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" (22 Hz), 600 mm 23.62" (10 Hz), 1500 mm 59.06" (1 Hz) Operating ambient temperature: 0 to +40°C 32 to 104°F Operating ambient humidity: 35 to 65% RH 0.3 m/s 1.3'/s downflow ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence SV3-B075AK Keyence

€0,00

Sold Out

Specifications

Model				SV3-B075AK ^*1
General specifications	Applicable servo amplifier			SV3-075L2
	Rated output			750 W
	Rated torque			2.39 N·m ^*2
	Instant maximum torque			8.36 N·m
	Rated current			4.4 Arms
	Instant maximum current			16.9 Arms
	Rated rotation speed			3,000 min^-1
	High rotation speed			7,000 min^-1
	Torque constant			0.584 N·m/Arms
	Rotor moment of inertia			1.76 ×10^-4 kg·m²
	Rated power rating			32.4 kW/s
	Rated angle acceleration			13,500 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		26 bit
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or higher)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20% to 80% RH (No condensation)
		Operating atmosphere		Indoors (No corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2,000 m 6,561.7' or less (reduced ratings at 1,000 m 3,280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8 ft/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1,607.6 ft/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: Class A, CE: Class B
	Min. insulation resistance			500 VDC 10 MΩ or more with insulation resistance meter
	Isolation voltage tolerance			1,500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part 15 B, ICES-003. Class A
	Allowable load inertia moment			12×^*3
	Approx. weight			2.8 kg 6.17 lb
Electromagnetic brake specifications	Capacity			6.5 W
	Rated voltage			24 VDC ±10%
	Rated current (@20°C 68°F)			0.27 A
	Holding torque			2.39 N·m
	Release time			80 ms
	Operating time			100 ms
^1 The open and operation times of the electromagnetic brake depend on the discharge circuit. ^2 50 W to 750 W rated torque is continuously allowable with an ambient temperature of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W/100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with an ambient temperature of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^*3 This is the value at 6,000 min-1. At 7,000 min-1, 200 W becomes 10×, 400 W becomes 5×, and 750 W becomes 8×.

Keyence PR-B01 Keyence

€0,00

Sold Out

Specifications

Model				PR-B01
Type				Flat bracket, standard type
Applicable product				PR-F Series
Number included				1 pcs.
Material				SUS316L
Note				M3 screw × 2 included
Weight				Approx. 8 g

Keyence CC-LU1 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88701 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV4-G500CA Keyence

€1.799,95

Only 6 units left

Specifications

Model		IV4-G500CA
Type		Standard model [IV4-G500CA+OP-88909] Ultra-narrow field of view model
Installed distance		From 50 mm 1.97" [IV4-G500CA+OP-88909] 23 mm to 40 mm 0.91" to 1.57"
Field of view		Installation distance of 50 mm 1.97": 22 (H) × 16 (V) mm to Installation distance of 3000 mm: 118.11" 1184 (H) × 888 (V) mm (reference value) [IV4-G500CA+OP-88909] Installation distance of 23 mm 0.91": 9.8 (H) × 7.3 (V) mm to Installation distance of 40 mm 1.57": 15 (H) × 11.2 (V) mm (reference value)
Image receiving element	Type	1/2.9 inch color CMOS
	Number of pixels	1280 (H) × 960 (V)
Focus adjustment		Auto ^*1
Exposure time		12 μs to 9 ms ^*2
Lights	Illumination	White LED
	Lighting method	Switchable between pulse and continuous lighting
Indicators		2 indicators (both displaying same content)
Power supply	Average power consumption	2.5 W (without AI imaging illumination unit installed) 6.6 W (with AI imaging illumination unit installed) [IV4-G500CA+OP-88909] 2.5 W
Environmental resistance	Enclosure rating	IP67 ^*3 [IV4-G500CA+OP-88909] ─
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing) ^*4
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	Frequency: 10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² 3 times in each of 6 directions
Material		Main unit case: Zinc die-casting. Front cover: Acrylic. Operation indicator cover: TPU ^*5
Weight		Approx. 75 g 2.65 oz (no AI imaging illumination unit) Approx. 225 g 7.94 oz (with AI imaging illumination unit) [IV4-G500CA+OP-88909] Approx. 85 g 3.00 oz
^1 Focus position can be automatically adjusted during installation. It cannot be adjusted while running. Focus position can be registered separately for each program. ^2 Maximum exposure time is 500 ms only when lighting is set to OFF. ^3 Except when polarizing filters (OP-88642/OP-88643/OP-88646/OP-88647) are installed. ^4 When the operating ambient temperature exceeds 40°C 104°F, install in accordance with KEYENCE instructions, taking appropriate measures for heat dissipation to ensure that the case temperature does not exceed the rated 65°C 149°F. For the case temperature, measure the side with the “IV4 series” label. ^*5 ESD safe and IEC61340-5-1 compliant.

Keyence GL-VCC1 Keyence

€0,00

Sold Out

Specifications

Model				GL-VCC1
Type				Extension cable
Number included				1 pc.
Cable end				Female side: M12 connector 5 pin Male side: M12 connector 5 pin
Number of cores				5
Length				1 m 3.3'
Material				connector: PVC/Nickel-plated brass cable: PVC
Weight				100 g