AS-I SLIMLINE COMPACT MODULE IP20, A/B-SLAVE, DIGITAL, 4DI SPRING-LOADED TERMINALS, 17,5MM 4X INPUT FOR 2-WIRE SENSOR
ET 200SP MS starter kit including 3RK 1308 motor starter 0.9 - 3 A, reversing starter, BaseUnit with infeed 24 V and 500 V, EMC distance module (blank module 15 mm)
SIMATIC DP, Connection plug for PROFIBUS up to 12 Mbit/s 35 degree cable outlet, Insulation displacement method FastConnect, With PG receptacle 15.8x 54x 39.5 mm (BxHxD)
TERMINATION KIT SC RJ POF PLUG, KIT FOR ON-SITE PREASSEMBLING OF SC RJ CONNECTORS CONSIST. OF STRIPPING TOOL, KEVLAR SCISSORS, POLISH SET
ECOFAST SET OF SEALS FOR POWER T TERMINAL CONN. FOR POWER CABLES DIAMETER 16-19 MM PACK OF 2
SIMATIC S7, RS485 REPEATER FOR THE CONNECTION OF PROFIBUS/MPI BUS SYSTEMS WITH MAX. 31 NODES; MAX. 12 MBIT/S, IP20
AS-I SLIMLINE COMPACT MODULE IP20, A/B-SLAVE, DIGITAL, 4DQ SPRING-LOADED TERMINALS, 22.5MM 4X OUTPUT TRANSISTOR 2A
SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE OUTGOING CABLE, 15,8 X 59 X 35,6 MM (WXHXD), IPCD TECHOLOGY FAST CONNECT, WITH PG SOCKET
Simatic S7, TS Module Modem FOR Simatic TeleService, CONNECTION ON TS ADAPTER IE, POWER SUPPLY from TS ADAPTER
AS-INTERFACE COMPACT MOD. K45, A/B-SLAVE,DIGITAL, 2X2I, IP67, 2X2 INPUT, MAX. 200 MA, PNP 2 X M12-SOCKET Y-ASSIGNMENT MOUNTING PLATE 3RK1901-2EA00 OR 3RK1901-2DA00 TO BE ORDERED SEPARATELY
BUS CABLE FOR PROFIBUS PREASSEMBLED ONE SIDE 1XM12 ANGLED, MALE 2-CORE, SHIELDED LENGTH 10M
Active field distributor AFD4 for standard mounting rail mounting without enclosure for PROFIBUS PA for foundation Fieldbus H1, 4 short circuit-proof spur lines with bounce protection logic Automatic bus termination for line and ring topology for extended temperature range Degree of protection IP20
SIMATIC DP, Connection plug for PROFIBUS up to 12 Mbit/s with inclined cable outlet, 15.8x 54x 39.5 mm (WxHxD), terminating resistor with isolating function, With PG receptacle
Base unit (BU30-MS7) With F-DI infeed For ET 200SP motor starter With infeed 500 V Incl. infeed bus cover
SIMATIC DP, Connection plug for PROFIBUS up to 12 Mbit/s 90° cable outlet, Insulation displacement method FastConnect, without PG socket 15.8x 59x 35.6 mm (BxHxD)
SIMATIC DP, RS485 terminating resistor for terminating PROFIBUS/MPI networks
SIMATIC C7-621, Connection IM621 in expansion rack for connection of 4 modules of the S7-300 to C7-621, incl. cable 0.5 m
Base unit (BU30-MS10) With F-DI infeed For ET 200SP motor starter Without infeed Incl. infeed bus cover
SIMATIC ET 200SP communication module CM AS-Interface Master ST according to AS-i specification V3.0
Front conn. for SIMATIC S7-1500 40-pin (6ES7592-1AM00-0XB0) w. 40 single cores 0.5 mm2 core type H05V-K screw-type version L = 10.0 m
BaseUnit for ET 200SP motor starters with 500V infeed
CONNECTION MODULE TP2 8 CHANNELS F. 2A DIGITAL OUTPUT U. 2X5 MULTIPLICATION TERMINALS TYPE:SPRING TERMINAL WITH LED, VPE=1 UNIT 16 POLE IDC CONNECTOR F. CABLE
SIMATIC Compact FF Link Combination of DP/FF Link and FF coupler, Foundation Fieldbus Linkmaster, physical interface for Foundation Fieldbus H1, integrated bus supply up to 500 mA, with redundancy capability, integrated diagnostics, 40 mm wide, Degree of protection IP20, for extended temperature range
SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET, 15,8 X 54 X 39,5 MM (WXHXD), TERMINAT. RESIST. WITH ISOLAT. FUNCTION, WITHOUT PG SOCKET