Buy Best selling products Industrial Automation Parts

€285,95

Only 1 unit left

Specifications

Model		MS-F07
Input conditions	Input voltage	85 to 264 VAC (50/60 Hz), 120 to 340 VDC^*1
	Frequency	47 to 63Hz^*2
Inputconditions	Input current (100/200 VAC)	0.28/0.16A or less
	Efficiency (100/200 VAC)	―
	Leakage current (100/200 VAC)	0.5/1mA or less
	Rush current (100/200 VAC)	18, 36 A or less (with a +25°C 77°F cold start)
Output characteristics	Rated voltage	12V
	Variable voltage range	±5% (with V.ADJ)
	Rated current	0.65A
	Ripple/noise voltage	2% (p-p) or less
	Input fluctuation	0.5% or less
	Load fluctuation	1.0% or less
	Temperature fluctuation	―
	Startup time	400ms or less
	Output holding time	20 ms or more (100 to 240 VAC)
Protection	Overcurrent protection	Constant current drop method, automatic recovery, 0.79 A or more
	Overvoltage protection	Present^*3
Display	Display power	―
	Power off memory time
	Display resolution
Applicable standards	Safety standards	UL60950, CSA C22.2 number 60950, EN60950
	EMC standard	FCC Part 15 B Class A, EN55011 Class A
	Limits for harmonic current emissions	EN61000-3-2^*4
Other	Parallel operation	Not possible
	Series operation	Possible^*5
	Cooling method	Natural air cooling
Environmental resistance	Insulation resistance	100 MΩ or more at 500 VDC (between input and output, between input and FG, and between output and FG)
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing) (see the derating characteristics)
	Relative humidity	25 to 85 % RH (No condensation)
	Withstand voltage	3.0 kVAC 50/60 Hz 1 min (across input and output terminals), 2.0 kVAC 50/60 Hz 1min (across input terminals and PE terminal), 500 VDC 1min (across output terminals and PE terminal)
	Vibration resistance	10 to 57 Hz, Double amplitude 0.3 mm 0.01", 57 to 500 Hz, 19.6 m/s² (2 G), cycle: 5.5 minutes, 2 hours in each of the X, Y, and Z directions
	Shock resistance	Peak acceleration: 300 m/s², 2 times in each of the X, Y, and Z directions
Weight		Approx. 140 g
^1 When applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^2 The rated input voltage and rated frequency when applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^3 To return, turn OFF the input power supply and after leaving it off for 1 minute or more, plug in the input power supply again. The E/F Series is a Zener diode clamp type. It will not restart after the protection circuit operation. ^4 For the MS2-H100, this is applicable only when the load ratio is 70% or less. ^*5 The applicable standards do not apply for parallel and serial operations.

Rexroth R911222857 Rexroth

€3.021,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Schneider BMP0702F3NA2A Schneider

€591,95

Only 2 units left

Main

Characteristic	Value(s)
Product or Component Type	Synchronous motor
Device short name	BMP
Maximum mechanical speed	3600 rpm
Nominal output power	550 W ATV32 0.55 kW 400 V three phase 550 W ATV320 0.55 kW 400 V three phase
Nominal torque	15.49 lbf.in (1.75 N.m) ATV32 0.55 kW 400 V three phase 15.49 lbf.in (1.75 N.m) ATV320 0.55 kW 400 V three phase
Nominal speed	3000 rpm ATV32 0.55 kW 400 V three phase 3000 rpm ATV320 0.55 kW 400 V three phase
Product compatibility	Variable speed drive ATV32 0.55 kW 400 V three phase Variable speed drive ATV320 0.55 kW 380...500 V three phase
Shaft end	Keyed
IP Degree of Protection	IP65 standard IP67 with IP67 kit
Holding brake	Without
Mounting Support	International standard flange
Electrical Connection	Rotatable right-angled connector

Complementary

Characteristic	Value(s)
Range Compatibility	Altivar Machine ATV320 Altivar 32
[Us] rated supply voltage	480 V
Phase	Three phase
Maximum current Irms	2.9 A ATV32 0.55 kW 400 V three phase 2.9 A ATV320 0.55 kW 400 V three phase
Nominal operating frequency	250 Hz ATV32 0.55 kW 400 V three phase 250 Hz ATV320 0.55 kW 400 V three phase
Minimum operating frequency	25 Hz ATV32 0.55 kW 400 V three phase 25 Hz ATV320 0.55 kW 400 V three phase
Maximum operating frequency	300 Hz ATV32 0.55 kW 400 V three phase 300 Hz ATV320 0.55 kW 400 V three phase
Shaft diameter	0.4 in (11 mm)
Shaft length	0.9 in (23 mm)
key width	0.2 in (4 mm)
Motor flange size	2.8 in (70 mm)
Torque constant	1.51 N.m/A 104 Â°F (40 Â°C)
Number of motor poles	5
Number of motor stacks	2
Rotor inertia	1.13 kg.cmÂ²
Stator resistance	6.96 Ohm 104 Â°F (40 Â°C)
Stator inductance	20.7 mH for q-axis winding 104 Â°F (40 Â°C) 20.7 mH for d-axis winding 104 Â°F (40 Â°C)
Maximum radial force Fr	710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm
Maximum axial force Fa	0.2 x Fr
type of cooling	Natural convection
Length	6.06 in (154 mm)
Centring collar diameter	2.4 in (60 mm)
centring collar depth	0.10 in (2.5 mm)
Number of mounting holes	4
Mounting holes diameter	0.2 in (5.5 mm)
Circle diameter of the mounting holes	3.0â¦3.2 in (75â¦82 mm)
Product Weight	4.0 lb(US) (1.8 kg)

Honeywell PVL6436A Honeywell

€3.475,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Schneider 140XTS00203 Schneider

€310,95

Only 1 unit left

Main

Characteristic	Value(s)
Range of Product	Modicon Quantum automation platform
Accessory / separate part designation	CableFast system cable
Accessory / Separate Part Type	Power cable
Accessory / separate part category	Connection accessories
Accessory / separate part destination	Quantum module

Complementary

Characteristic	Value(s)
Cable length	3.0 ft (0.9 m)
Power type	Standard
Type of Cable	Terminated
Electrical connection	1 connector Quantum I/O 1 connector SUB-D, 50 pins
Color	Black

ABB 1SFA611605R1100 ABB - MCBH-00

€369,95

Only 1 unit left

Ordering

Minimum Order Quantity:

10 piece

Customs Tariff Number:

8538909999

Popular Downloads

Data Sheet, Technical Information:

1SFC151007C0201 Pilot Devices the complete offering, Main Catalogue

Instructions and Manuals:

Safety instructions & Installation instructions - Pilot Devices

Dimensions

Product Net Width:

0.03 m

Product Net Height:

0.048 m

Product Net Depth / Length:

0.013 m

Product Net Weight:

0.01 kg

Technical

Ambient Air Temperature:

Operation -25 ... +70 °C

Storage -40 ... +85 °C

Operation -25 ... +70 °C

Storage -40 ... +85 °C

Mounting Type:

Front mounting

Suitable For:

MP1

MP2

MP3

MP4

MPD1

MPD2

MPD3

MPD4

MPD5

MPD11

MPD12

MPD13

MPD14

MPD15

MPD16

MPM1

MPM2

KP6

MPET3

MPEP3

MPEK3

MPET4

MPEP4

MPEK4

MPMT3

MPMT4

MPMP3

MPMP4

M2SS1

M2SS2

M2SS3

M2SS4

M2SS5

M2SS6

M3SS1

M3SS2

M3SS3

M3SS4

M3SS5

M3SS6

M3SS7

M3SS8

M3SSC1

M3SSC2

M3SSC3

M3SSC4

M3SSC5

M3SSC6

M3SSC7

M3SSC8

M2SSK1

M2SSK2

M2SSK3

M3SSK1

M3SSK2

M3SSK3

MTS1

MTS2

MTS3

MJS1

MJS2

MJS5

MJS6

MJS7

MJS8

MJS11

MJS12

MP1

MP2

MP3

MP4

MPD1

MPD2

MPD3

MPD4

MPD5

MPD11

Suitable for Product Class:

Pilot Devices

Environmental

Degree of Protection:

Terminals IP20

Material Compliance

Conflict Minerals Reporting Template (CMRT):

CMRT - Conflict Minerals Reporting Template

REACH Declaration:

REACh - Pilot Devices

RoHS Information:

RoHS - Pilot Devices

RoHS Status:

Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019

Toxic Substances Control Act - TSCA:

Toxic Substances Control Act (TSCA) declaration for Pilot Devices

WEEE Category:

Product Not in WEEE Scope

Certificates and Declarations

cULus Certificate:

cULus Certificate, Pilot Devices, MCB, MDB

Declaration of Conformity - CE:

CE Declaration of Conformity - Pilot Devices - M-series

Declaration of Conformity - UKCA:

UKCA Declaration of Conformity - Pilot Devices

Container Information

Package Level 1 Units:

bag 10 piece

Package Level 1 Width:

0.11 m

Package Level 1 Depth / Length:

0.15 m

Package Level 1 Height:

0.02 m

Package Level 1 Gross Weight:

0.1 kg

Package Level 1 EAN:

7320500307465

External Classifications and Standards

Object Classification Code:

S

ETIM 6:

EC001020 - Adapter for control circuit devices

ETIM 7:

EC001020 - Adapter for control circuit devices

ETIM 8:

EC001020 - Adapter for command devices

eClass:

V11.0 : 27371302

UNSPSC:

39122221

IDEA Granular Category Code (IGCC):

5219 >> Switch part or accessory

E-Number (Finland):

2339091

E-Number (Norway):

4373197

E-Number (Sweden):

3714000

Schneider BMI1003P16A Schneider

€1.941,95

Only 2 units left

Main

Characteristic	Value(s)
Range Compatibility	Lexium 32i
Device short name	BMI
Product or Component Type	Servo motor with power stage

Complementary

Characteristic	Value(s)
Maximum mechanical speed	6000 rpm
[Us] rated supply voltage	208...480 V - 15...10 %
Supply voltage limits	208â¦480 V
Phase	Three phase
Supply frequency	50/60 Hz - 5...5 %
Network frequency limits	47.5â¦63 Hz
EMC filter	Integrated
Continuous output current	4 A 8 kHz
Output current 3s peak	12 A 400 V 3 s
Continuous stall current	4 A
Continuous stall torque	75.2 lbf.in (8.5 N.m) 208...480 V three phase
Peak stall torque	169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase
Nominal output power	1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase
Nominal torque	63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase
Nominal speed	1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase
Maximum current Irms	26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase
Product compatibility	Drive control unit LXM32i CANopen Drive control unit LXM32i EtherCAT
Shaft end	Keyed
Second shaft	Without second shaft end
Shaft diameter	0.7 in (19 mm)
Shaft length	1.6 in (40 mm)
key width	0.2 in (6 mm)
Feedback type	Absolute single turn SinCos Hiperface
Speed feedback resolution	32768 points/turn
Holding brake	Without
Mounting Support	International standard flange
Motor flange size	3.9 in (100 mm)
Electrical Connection	Printed circuit board connector
Torque constant	1.7 N.m/A 68 Â°F (20 Â°C)
Back emf constant	112 V/krpm 68 Â°F (20 Â°C)
Number of motor poles	10
Rotor inertia	9.37 kg.cmÂ²
Stator resistance	2.31 Ohm 68 Â°F (20 Â°C)
Stator inductance	11.43 mH 68 Â°F (20 Â°C)
Stator electrical time constant	4.95 ms 68 Â°F (20 Â°C)
Maximum radial force Fr	1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm
Maximum axial force Fa	0.2 x Fr
type of cooling	Natural convection
Length	11.8 in (299 mm)
Number of motor stacks	3
Centring collar diameter	3.7 in (95 mm)
centring collar depth	0.1 in (3.5 mm)
Number of mounting holes	4
Mounting holes diameter	0.4 in (9 mm)
Circle diameter of the mounting holes	4.5 in (115 mm)
Distance shaft shoulder-flange	0.1 in (3.5 mm)

Rexroth R911173337 Rexroth

€2.976,95

Only 3 units left

Buy the Bosch Rexroth R911173337 - a genuine Bosch Rexroth industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Bosch Rexroth R911173337 is a direct drop-in replacement for existing installations and ships ready for integration.

Rexroth R911172554 Rexroth

€2.217,95

Only 3 units left

Buy the Bosch Rexroth R911172554 - a genuine Bosch Rexroth industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Bosch Rexroth R911172554 is a direct drop-in replacement for existing installations and ships ready for integration.

Schneider BMH0703P21F2A Schneider

€1.133,95

Only 1 unit left

Main

Characteristic	Value(s)
Device short name	BMH
Product or Component Type	Servo motor
Maximum mechanical speed	8000 rpm
Continuous stall torque	30.09 lbf.in (3.4 N.m) LXM32.D18N4 6 A, 400 V, three phase 30.09 lbf.in (3.4 N.m) LXM32.D18N4 6 A, 480 V, three phase
Peak stall torque	90.3 lbf.in (10.2 N.m) LXM32.D18N4 6 A, 400 V, three phase 90.3 lbf.in (10.2 N.m) LXM32.D18N4 6 A, 480 V, three phase
Nominal output power	1300 W LXM32.D18N4 6 A, 400 V, three phase 1300 W LXM32.D18N4 6 A, 480 V, three phase
Nominal torque	21.2 lbf.in (2.4 N.m) LXM32.D18N4 6 A, 400 V, three phase 21.2 lbf.in (2.4 N.m) LXM32.D18N4 6 A, 480 V, three phase
Nominal speed	5000 rpm LXM32.D18N4 6 A, 400 V, three phase 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
Product compatibility	LXM32.D18N4 400...480 V three phase
Shaft end	Smooth shaft
IP Degree of Protection	IP65 standard IP67 with IP67 kit
Speed feedback resolution	131072 points/turn
Holding brake	With
Mounting Support	International standard flange
Electrical Connection	Rotatable right-angled connectors

Complementary

Characteristic	Value(s)
Range Compatibility	Lexium 32
[Us] rated supply voltage	480 V
Phase	Three phase
Continuous stall current	3.91 A
Continuous power	1.68 W
Maximum current Irms	12.57 A LXM32.D18N4
Maximum permanent current	12.57 A
Second shaft	Without second shaft end
Shaft diameter	0.6 in (14 mm)
Shaft length	1.2 in (30 mm)
Feedback type	Single turn SinCos Hiperface
Holding torque	26.6 lbf.in (3 N.m) holding brake
Motor flange size	2.8 in (70 mm)
Number of motor stacks	3
Torque constant	0.87 N.m/A 248 Â°F (120 Â°C)
Back emf constant	55.8 V/krpm 248 Â°F (120 Â°C)
Number of motor poles	5.0
Rotor inertia	1.78 kg.cmÂ²
Stator resistance	2.65 Ohm 68 Â°F (20 Â°C)
Stator inductance	4.175 mH 68 Â°F (20 Â°C)
Stator electrical time constant	3.2 ms 68 Â°F (20 Â°C)
Maximum radial force Fr	730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Maximum axial force Fa	0.2 x Fr
Brake pull-in power	7 W
type of cooling	Natural convection
Length	8.9 in (225 mm)
Centring collar diameter	2.4 in (60 mm)
centring collar depth	0.10 in (2.5 mm)
Number of mounting holes	4
Mounting holes diameter	0.2 in (5.5 mm)
Circle diameter of the mounting holes	3.2 in (82 mm)
Product Weight	8.8 lb(US) (4 kg)
Sizing reference	BMH0703P
Network number of phases	3
Accuracy error [angular]	1.4 Â°
Temperature copper hot	275 Â°F (135 Â°C)
Temperature magnet hot	212 Â°F (100 Â°C)
Temperature magnet rt	68 Â°F (20 Â°C)

Schneider BMH0703P21A2A Schneider

€1.418,95

Only 1 unit left

Main

Characteristic	Value(s)
Device short name	BMH
Product or Component Type	Servo motor
Maximum mechanical speed	8000 rpm
Continuous stall torque	30.09 lbf.in (3.4 N.m) LXM32.D18N4 6 A, 400 V, three phase 30.09 lbf.in (3.4 N.m) LXM32.D18N4 6 A, 480 V, three phase
Peak stall torque	90.3 lbf.in (10.2 N.m) LXM32.D18N4 6 A, 400 V, three phase 90.3 lbf.in (10.2 N.m) LXM32.D18N4 6 A, 480 V, three phase
Nominal output power	1300 W LXM32.D18N4 6 A, 400 V, three phase 1300 W LXM32.D18N4 6 A, 480 V, three phase
Nominal torque	21.2 lbf.in (2.4 N.m) LXM32.D18N4 6 A, 400 V, three phase 21.2 lbf.in (2.4 N.m) LXM32.D18N4 6 A, 480 V, three phase
Nominal speed	5000 rpm LXM32.D18N4 6 A, 400 V, three phase 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
Product compatibility	LXM32.D18N4 400...480 V three phase
Shaft end	Smooth shaft
IP Degree of Protection	IP65 standard IP67 with IP67 kit
Speed feedback resolution	131072 points/turn
Holding brake	Without
Mounting Support	International standard flange
Electrical Connection	Rotatable right-angled connectors

Complementary

Characteristic	Value(s)
Range Compatibility	Lexium 32
[Us] rated supply voltage	480 V
Phase	Three phase
Continuous stall current	3.91 A
Continuous power	1.68 W
Maximum current Irms	12.57 A LXM32.D18N4
Maximum permanent current	12.57 A
Second shaft	Without second shaft end
Shaft diameter	0.6 in (14 mm)
Shaft length	1.2 in (30 mm)
Feedback type	Single turn SinCos Hiperface
Motor flange size	2.8 in (70 mm)
Number of motor stacks	3
Torque constant	0.87 N.m/A 248 Â°F (120 Â°C)
Back emf constant	55.8 V/krpm 248 Â°F (120 Â°C)
Number of motor poles	5.0
Rotor inertia	1.67 kg.cmÂ²
Stator resistance	2.65 Ohm 68 Â°F (20 Â°C)
Stator inductance	4.175 mH 68 Â°F (20 Â°C)
Stator electrical time constant	3.2 ms 68 Â°F (20 Â°C)
Maximum radial force Fr	730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Maximum axial force Fa	0.2 x Fr
type of cooling	Natural convection
Length	7.3 in (186 mm)
Centring collar diameter	2.4 in (60 mm)
centring collar depth	0.10 in (2.5 mm)
Number of mounting holes	4
Mounting holes diameter	0.2 in (5.5 mm)
Circle diameter of the mounting holes	3.2 in (82 mm)
Product Weight	6.6 lb(US) (3 kg)
Sizing reference	BMH0703P
Network number of phases	3
Accuracy error [angular]	1.4 Â°
Temperature copper hot	275 Â°F (135 Â°C)
Temperature magnet hot	212 Â°F (100 Â°C)
Temperature magnet rt	68 Â°F (20 Â°C)

Rexroth R412000394 Rexroth

€2.459,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Schneider BMI1002T16A Schneider

€2.535,95

Only 1 unit left

Main

Characteristic	Value(s)
Range Compatibility	Lexium 32i
Device short name	BMI
Product or Component Type	Servo motor with power stage

Complementary

Characteristic	Value(s)
Maximum mechanical speed	6000 rpm
[Us] rated supply voltage	115...230 V - 15...10 %
Supply voltage limits	100â¦240 V
Phase	Single phase
Supply frequency	50/60 Hz - 5...5 %
Network frequency limits	47.5â¦63 Hz
EMC filter	Integrated
Continuous output current	6 A 8 kHz
Output current 3s peak	18 A 230 V 3 s
Continuous stall current	6 A
Continuous stall torque	53.1 lbf.in (6 N.m) 115...230 V single phase
Peak stall torque	128.3 lbf.in (14.5 N.m) 115 V single phase 128.3 lbf.in (14.5 N.m) 230 V single phase
Nominal output power	750 W 115 V single phase 1300 W 230 V single phase
Nominal torque	47.8 lbf.in (5.4 N.m) 115 V single phase 38.9 lbf.in (4.4 N.m) 230 V single phase
Nominal speed	1400 rpm 115 V single phase 3000 rpm 230 V single phase
Maximum current Irms	30 A 115 V, single phase 30 A 230 V, single phase
Product compatibility	Drive control unit LXM32i CANopen Drive control unit LXM32i EtherCAT
Shaft end	Keyed
Second shaft	Without second shaft end
Shaft diameter	0.7 in (19 mm)
Shaft length	1.6 in (40 mm)
key width	0.2 in (6 mm)
Feedback type	Absolute single turn SinCos Hiperface
Speed feedback resolution	32768 points/turn
Holding brake	Without
Mounting Support	International standard flange
Motor flange size	3.9 in (100 mm)
Electrical Connection	Printed circuit board connector
Torque constant	0.89 N.m/A 68 Â°F (20 Â°C)
Back emf constant	58.5 V/krpm 68 Â°F (20 Â°C)
Number of motor poles	10
Rotor inertia	6.28 kg.cmÂ²
Stator resistance	1.08 Ohm 68 Â°F (20 Â°C)
Stator inductance	4.7 mH 68 Â°F (20 Â°C)
Stator electrical time constant	4.35 ms 68 Â°F (20 Â°C)
Maximum radial force Fr	990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm
Maximum axial force Fa	0.2 x Fr
type of cooling	Natural convection
Length	10.7 in (273 mm)
Number of motor stacks	2
Centring collar diameter	3.7 in (95 mm)
centring collar depth	0.1 in (3.5 mm)
Number of mounting holes	4
Mounting holes diameter	0.4 in (9 mm)
Circle diameter of the mounting holes	4.5 in (115 mm)
Distance shaft shoulder-flange	0.1 in (3.5 mm)

Rexroth R911171956-AD1 Rexroth

€1.649,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Schneider BMH0703P02A2A Schneider

€1.202,95

Only 1 unit left

Main

Characteristic	Value(s)
Device short name	BMH
Product or Component Type	Servo motor
Maximum mechanical speed	8000 rpm
Continuous stall torque	30.09 lbf.in (3.4 N.m) LXM32.D18N4 6 A, 400 V, three phase 30.09 lbf.in (3.4 N.m) LXM32.D18N4 6 A, 480 V, three phase
Peak stall torque	90.3 lbf.in (10.2 N.m) LXM32.D18N4 6 A, 400 V, three phase 90.3 lbf.in (10.2 N.m) LXM32.D18N4 6 A, 480 V, three phase
Nominal output power	1300 W LXM32.D18N4 6 A, 400 V, three phase 1300 W LXM32.D18N4 6 A, 480 V, three phase
Nominal torque	21.2 lbf.in (2.4 N.m) LXM32.D18N4 6 A, 400 V, three phase 21.2 lbf.in (2.4 N.m) LXM32.D18N4 6 A, 480 V, three phase
Nominal speed	5000 rpm LXM32.D18N4 6 A, 400 V, three phase 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
Product compatibility	LXM32.D18N4 400...480 V three phase
Shaft end	Smooth shaft
IP Degree of Protection	IP54 standard
Speed feedback resolution	131072 points/turn x 4096 turns
Holding brake	Without
Mounting Support	International standard flange
Electrical Connection	Rotatable right-angled connectors

Complementary

Characteristic	Value(s)
Range Compatibility	Lexium 32
[Us] rated supply voltage	480 V
Phase	Three phase
Continuous stall current	3.91 A
Continuous power	1.68 W
Maximum current Irms	12.57 A LXM32.D18N4
Maximum permanent current	12.57 A
Second shaft	Without second shaft end
Shaft diameter	0.6 in (14 mm)
Shaft length	1.2 in (30 mm)
Feedback type	Multiturn SinCos Hiperface
Motor flange size	2.8 in (70 mm)
Number of motor stacks	3
Torque constant	0.87 N.m/A 248 Â°F (120 Â°C)
Back emf constant	55.8 V/krpm 248 Â°F (120 Â°C)
Number of motor poles	5.0
Rotor inertia	1.67 kg.cmÂ²
Stator resistance	2.65 Ohm 68 Â°F (20 Â°C)
Stator inductance	4.175 mH 68 Â°F (20 Â°C)
Stator electrical time constant	3.2 ms 68 Â°F (20 Â°C)
Maximum radial force Fr	730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Maximum axial force Fa	0.2 x Fr
type of cooling	Natural convection
Length	7.3 in (186 mm)
Centring collar diameter	2.4 in (60 mm)
centring collar depth	0.10 in (2.5 mm)
Number of mounting holes	4
Mounting holes diameter	0.2 in (5.5 mm)
Circle diameter of the mounting holes	3.2 in (82 mm)
Product Weight	6.6 lb(US) (3 kg)
Sizing reference	BMH0703P
Network number of phases	3
Accuracy error [angular]	1.4 Â°
Temperature copper hot	275 Â°F (135 Â°C)
Temperature magnet hot	212 Â°F (100 Â°C)
Temperature magnet rt	68 Â°F (20 Â°C)

Honeywell T6031A1029 Honeywell

€328,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Yaskawa CACR-SR30BB1AM-Y114 Yaskawa

€4.714,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Rexroth R911171031-GE1 Rexroth

€7.130,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Schneider AS-E380-904 Schneider

€641,95

Only 3 units left

Buy the Schneider Electric AS-E380-904 - a genuine Schneider Electric industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Schneider Electric AS-E380-904 is a direct drop-in replacement for existing installations and ships ready for integration.

Rexroth R911170837-102 Rexroth

€1.649,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Schneider 9037HG33 Schneider

€346,95

Only 1 unit left

closed tank - NEMA 1 - screw-in bushing - 2 NC DPST-DB contacts

Schneider ATV71LD10N4Z Schneider Electric Altivar Lift Variable speed drive

€2.136,95

Only 1 unit left

Variable Speed Drive ATVLift - 4kW 5 Hp - 480 V - EMC filter - with Heat Sink

Yaskawa SGDV-120A21A008000 Yaskawa

€316,95

Only 1 unit left

The SGDV120A21A008000 servo amplifier represents the advanced SIGMA 5 series, providing a powerful output of 1.50 kW suitable for rotary applications with a single-phase 230V power supply. Engineered for precision, this unit utilizes Mechatrolink III communication, allowing for effective integration into sophisticated automation systems. With its reliable performance and compact configuration, the SGDV120A21A008000 is an optimal solution for enhancing motion control in various industrial settings.

Honeywell TVEZQX-61-000-22-0-005-0U0000-000 Honeywell

€2.930,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.