PI 984X 108 PI984X108 CPU MODBUS PORTS 2, MODBUS PLUS PORTS 0.
PI P190 002 P190-584 REFERENCE CARD.
PowerPacT P-Frame automatic switches are a disconnect device and can be used to open and close a circuit under normal operating conditions. The automatic switches are similar in construction, use the same accessories, and offer the same connection possibilities as the P-Frame circuit breaker version. The switches have a factory set, nonadjustable trip point calibrated to protect the molded case switch. The automatic switch can make and break its rated current. PowerPacT P-Frame switches are available in unit mount, I-Line, plug-in, or drawout constructions. This switch has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT P, 1000A, 2 pole, automatic switch has a short circuit withstand current rating of 25kA at 600VAC. It has an ABC phase connection. PowerPacT P automatic switches comply to UL, CSA, ANCE, and IEC standards.
Main
| Characteristic | Value(s) |
|---|---|
| Product or Component Type | Automatic switch |
| Range of Product | PowerPact P |
| Trip unit technology | Magnetic |
Complementary
| Characteristic | Value(s) |
|---|---|
| Line Rated Current | 1000 A |
| [Ue] rated operational voltage | 600 V AC |
| Mounting Mode | I-Line |
| Poles description | 2P |
| Short-circuit withstand | 65 kA 480 V UL 489 25 kA 600 V UL 489 100 kA 240 V UL 489 |
| Breaking capacity code | J |
| Electrical connection | Lugs, load I-Line connection, line |
| AWG gauge | 4 x AWG 3/0...500 kcmil ( aluminium/copper ) |
| Terminal identifier | AL1200P25K |
| Magnetic tripping current | 10000 A |
| Height | 16.24 in (412.50 mm) |
| Width | 16.54 in (420.12 mm) |
| Depth | 14.49 in (368.05 mm) |
| Tightening torque | 442.5 lbf.in (50 N.m) 0.1â¦0.4 in² (95â¦240 mm²) (AWG 3/0...500 kcmil) |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PM5100 Meter, without communication, up to 15th H, 1DO 33 alarms
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | PowerLogic PM800 |
| Device short name | PM810 |
| Product or Component Type | Power meter |
Complementary
| Characteristic | Value(s) |
|---|---|
| Power quality analysis | Up to the 31st harmonic |
| Type of measurement | Current Voltage Frequency Power factor total Apparent power total Active power total Reactive power total Apparent power per phase Active power per phase Reactive power per phase Energy Power factor per phase |
| supply voltage | 125...250 V DC 115...415 V AC 45...67 Hz 115...415 V AC 350...450 Hz |
| Network Frequency | 350...450 Hz 45...67 Hz |
| Maximum power consumption in VA | 15 VA |
| Display Type | Backlit LCD |
| Display Resolution | 6 lines |
| Sampling rate | 128 samples/cycle |
| Measurement current | 5 A 1 A |
| input type | Current 0.005...10 A (impedance <= 0.1 Ohm) |
| Measurement voltage | 0â¦600 V AC phase to phase 0â¦347 V AC phase to neutral |
| Number of inputs | 1 digital 0...5 mA 24...125 V AC/DC |
| Measurement accuracy | Current 0.5 % 0.5...10 A Voltage 0.2 % 10...227 V Energy 0.2 % Frequency 0.01 Hz Power factor 0.002 Power 0.2 % |
| Accuracy class | Class 2 reactive energy IEC 62053-23 Class 0.5S active energy IEC 62053-22 Class 0.2 active energy ANSI C12.20 |
| Number of Outputs | 1 digital (static) |
| Communication port protocol | Modbus 38.4 kbauds |
| Communication port support | RS485 |
| Data recording | Min/max of instantaneous values Time stamping Without memory Alarms GPS synchronisation |
PMC1-100 PMC1 100 CPUS CONTROLLER ASSEMBLY 24VAC 984-PMC1-100
PMC2-000 PMC2 000 COMMUNICATIONS OPERATOR INTERFACE 984-PMC2-000
PMC2-100 PMC2 100 COMMUNICATIONS OPERATOR INTERFACE 984-PMC2-100
PMC3-000 PMC3 000 COMMUNICATIONS OPERATOR INTERFACE 984-PMC3-000
PMC3-100 PMC3 100 COMMUNICATIONS OPERATOR INTERFACE 984-PMC3-100
