Directional antenna 868MHz / 900MHz, gain: 12dBi, polarization: linear, opening angle: h/v 56/46, degree of protection: IP65, connection: N (female), incl. mounting bracket and mast clips
Fuse module with separable test sockets and shield connection terminals (for analog cards of the Delta V control system)
Fuse module with shield connection terminals (for digital cards of the Delta V control system)
D-SUB connector, 15-pos. female connector, one cable entry < 35, universal type for all systems, pin assignment: 1, 2, 3, ..., 14, 15 to screw connection terminal block
D-SUB connector, 37-pos., female connector, one cable entry <35, universal type for all systems, pin assignment: 1, 2, 3, ... , 36, 37 to screw-connection terminal block
PLC-INTERFACE, consisting of DIN rail-mountable basic terminal block with screw connection and plug-in miniature solid-state relay, input: 120 V AC/110 V DC, output: 3 - 33 V DC/3 A, UL/cUL: approved for use in Ex Zone Class I, Div. 2
Fuse module with separable test sockets, fuse failure display and shield connection terminals (for analog cards of the Delta V control system)
Digital setpoint encoders with manual and automatic ramp for defining current and voltage signals, 4-pos. display
DIN rail housing, Upper housing part for connectors with header, width: 45.2 mm, height: 99 mm, depth: 45.85 mm, color: light gray (7035)
D-SUB plug, 9-pos. socket, two cable entries less than 35 to two terminal block rows, bus system: CAN, CANopen, SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2,3,7,9; screw connection terminal blocks
V.24 (RS-232) zero modem connector
Fiber optic converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4 wire/ INTERBUS up to 2 Mbps, termination device with one fiber optic interface (SC duplex), 1300 nm, for fiberglass cable
D-SUB connector, 15-pos. HD (High Density), male, one cable entry <35, universal type for all systems, pin assignment: 1, 2, 3, 6, 7, 8, 10, 13, 14 to screw connection terminal block
RS-232 cable, 9-pos. D-SUB socket on 9-pos. D-SUB socket, 9-wire, 1:1
FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, T-coupler with two FO interfaces (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
Patch panel, RJ45 socket on IDC terminal blocks, 10/100/1000Mbps, DIN rail mounting, IP20, shield contacting with strain relief
FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, T-coupler with two FO interfaces (FSMA), 660 nm, for polymer/PCF fiber cable
Patch panel, RJ45 socket on Push-in terminal blocks, 10/100/1000Mbps, DIN rail mounting, IP20, shield contacting with strain relief
FO converter, for converting 10/100Base-T to polymer and PCF fiber, (660 nm), SC-RJ FO connection (PROFINET standard), rail-mountable, supply 24 V DC
D-SUB connector, 9-pos. socket, cable entry < 35, bus system: CAN, CANopen, SafetyBUS p up to 1 Mbps, with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 7, 9; screw terminal blocks
FO converter with integrated optical diagnosis, for DeviceNet, CAN, CANopen to 800 kbps, extension/redundancy module, interfaces: 1x FO (FSMA), 660 nm, for polymer/PCF fiber cable
Managed Switch 2000, 12 RJ45 ports 10/100 Mbps, 2 SFP ports 100 Mbps, 2 Combo ports 10/100 Mbps, degree of protection:�IP20, PROFINET Conformance-Class B
Adapter set with 0.5 m cable, to supply the PSI Bluetooth RS-232 adapter from a USB or PS2 interface
FL Network Manager, SNMP-based configuration and firmware update software, for easy startup of Managed Switches