Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Screw connection technology
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 10 V, output signal: 0 20 mA, push-in connection technology
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 10 V, output signal: 0 20 mA, screw connection technology
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0 20 mA, output signal: 0 10 V, screw connection technology
Eight MINI Analog Pro signal conditioners and measuring transducers can be connected to a controller with minimal cabling effort and without any errors using system adapters and system cabling.
Assembled shielded round cable connection 1: D-SUB socket strip (1x 37-position) connection 2: D-SUB socket strip (1x 37-position) cable length: 30 m
32-channel module with 3-conductor screw connection and redundant connector. Suitable for Yokogawa ADV151, ADV161, ADV551, ADV561 cards.
VARIOFACE front adapter for Allen Bradley ControlLogix and Honeywell PlantScape, max. 1 x 32 channels can be connected via 1:1 connection.The front adapters are pushed into the high 1756-TBE hoods (not supplied as standard).
RIF-0... relay base, for miniature power relay with 1 N/O contact or solid-state relays of the same design, push-in connection, for mounting on NS 35/7,5
RIF-0... relay base, for miniature power relay with 1 N/O contact or identical solid-state relays, screw connection, for mounting on NS 35/7,5
Breather, M20, for FB... enclosure
Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch contacts, and switch contacts with resistance circuit. 2 transistor outputs, configurable via DIP switch. Screw connection technology.
3-phase loop bridge for 8 CONTACTRON modules, with screw connection and 22.5mm housing width, connecting cable: 3m, with ferrules included.
3-phase loop bridge for 7 CONTACTRON modules, with screw connection and 22.5mm housing width, connecting cable: 3m, with ferrules included.
3-phase loop bridge for 6 CONTACTRON modules, with screw connection and 22.5mm housing width, connecting cable: 3m, with ferrules included.
The voltage transducer set makes it possible to insert the electronic motor management module (EMM 3-.../500AC-IFS) in 690 V mains.
3-phase loop bridge for 10 CONTACTRON modules, with screw connection and 22.5mm housing width, connecting cable: 3m, with ferrules included.
2-piece universal wall adapter for securely mounting the device in the event of strong vibrations. The profiles that are screwed onto the side of the device are screwed directly onto the mounting surface. The universal wall adapter is attached on the left/right.
3-phase loop bridge for 3 CONTACTRON modules, with screw connection and 22.5mm housing width, connecting cable: 3m, with ferrules included.
3-phase loop bridge for 6 modules in the CONTACTRON family with 1 m long connecting cable without ferrules, 22.5 mm housing width.
Patch panel, two RJ45 sockets (1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail mounting, IP20, option of shield contacting on DIN rail via jumpers
Patch panel, one RJ45 socket to 8 IDC connection terminal blocks (1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail mounting, IP20, option of shield contacting on DIN rail via jumpers
3-phase loop bridge for 9 CONTACTRON modules, with screw connection and 22.5mm housing width, connecting cable: 3m, with ferrules included.
Patch panel, one RJ45 socket to 8 spring-cage connection terminal blocks (1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail mounting, IP20, option of shield contacting on DIN rail via jumpers