Axio control for direct open-loop control of Axioline I/Os. With 2 Ethernet interfaces and programming capabilities according to IEC 61131-3. Complete with connector connector and labeling field.
AX OPC SERVER, communication interface for OPC-capable visualization with PC WORX-based controls.
Auxiliary contactor relay
Assembled shielded round cable controller: Yokogawa CS3000 CentumVP (ADV561, ADV161) connection 1: IDC/FLK socket strip (1x 50-position) connection 2: IDC/FLK socket strip (4x 14-position) cable length: 5 m
Assembled shielded round cable controller: Yokogawa CS3000 CentumVP (ADV561, ADV161) connection 1: IDC/FLK socket strip (1x 50-position) connection 2: IDC/FLK socket strip (4x 14-position) cable length: 10 m
Assembled shielded round cable connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.) connection 2: D-SUB socket strip (1x 37-position) cable length: 2 m
Assembled shielded round cable connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.) connection 2: D-SUB pin strip (1x 37-position) cable length: 2 m
Assembled shielded round cable connection 1: D-SUB socket strip (1x 50-position) connection 2: D-SUB pin strip (1x 50-position) cable length: 4 m
Assembled shielded round cable connection 1: D-SUB socket strip (1x 50-position) connection 2: D-SUB pin strip (1x 50-position) cable length: 3 m
Assembled shielded round cable connection 1: D-SUB socket strip (1x 37-position) connection 2: D-SUB pin strip (1x 37-position) cable length: 6 m
Assembled shielded round cable connection 1: D-SUB socket strip (1x 37-position) connection 2: D-SUB pin strip (1x 37-position) cable length: 4 m
AS-i digital output module, single slave, 4 digital outputs, 24 V DC, IP67 protection
AS-i digital input module, AB slave, 4 digital inputs, 24 V DC, 2, 3 and 4-conductor connection method, IP67 protection
Antenna cable, outside diameter: 5�mm (0.2�in.), inner conductor: solid, attenuation: 2.0 / 3.3 / 4.8�dB at 0.9 / 2.4 / 5.8�GHz, connection: N (male) -> RSMA (male), cable length: 5�m (16�ft.)
Antenna cable, outside diameter: 5�mm (0.2�in.), inner conductor: solid, attenuation: 1.2 / 2.0 / 3.0�dB at 0.9 / 2.4 / 5.8�GHz, connection: N (male) -> RSMA (male), cable length: 3�m (10�ft.)
Antenna cable, outside diameter: 10�mm (0.4�in.), inner conductor: stranded, attenuation: 4.3 / 8.3 / 14.8�dB at 0.9 / 2.4 / 5.8�GHz, connection: 2 x N (male), cable length: 15�m (50�ft.)
Antenna cable, outside diameter: 10�mm (0.4�in.), inner conductor: stranded, attenuation: 2.9 / 5.6 / 9.9�dB at 0.9 / 2.4 / 5.8�GHz, connection: 2 x N (male), cable length: 10�m (32�ft.)
Antenna cable, outside diameter: 10�mm (0.4�in.), inner conductor: stranded, attenuation: 1.6 / 2.9 / 5.0�dB at 0.9 / 2.4 / 5.8�GHz, connection: 2 x N (male), cable length: 5�m (16�ft.)
Antenna cable, outside diameter: 10�mm (0.4�in.), inner conductor: stranded, attenuation: 1.0 / 1.8 / 3.1�dB at 0.9 / 2.4 / 5.8�GHz, connection: 2 x N (male), cable length: 3�m (10�ft.)
Antenna barrier for control cabinet feed-through, type of protection: Ex�i, degree of protection: IP65, barrier installation: Zone�2 / 22, antenna installation: in dust and gas Ex area, frequency range: 0.3�GHz�...�6�GHz, connection: 2 x N (female), ATEX, EAC Ex and IECEx approval
Analog frequency transducers for converting analog standard signals into frequency signals or PWM signals, configurable via DIP switch, with screw connection
Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.
Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
Adapter for connecting Fieldline Modular M8 devices to a Fieldline Modular M12 local bus