PoE injector, 60 W, RJ45 jack on Push-in terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
PoE injector, 60 W, RJ45 jack on IDC terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
PoE injector, 30�W, two RJ45 sockets, 10/100/1000�Mbps, DIN rail mounting, IP20, expanded temperature range of�-40�C�...�75�C�
PoE injector, 30�W, two RJ45 sockets, 10/100/1000�Mbps, DIN rail mounting, IP20
PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40�C ... 75�C, potential separation
PoE injector, 30 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
PoE injector, 30 W, RJ45 jack on Push-in terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
PoE injector, 30 W, RJ45 jack on IDC terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection
Plug-in power solid-state relay, with LED and protective circuit in input and output circuits, input: 24 V DC, output: short-circuit-proof, 10 - 30 V DC/max. 2 A, can be plugged into basic terminal blocks
plug-in miniature power relay, with power contact, 2 pdts, input voltage 24 v dc
PLCnext�Control for the direct control of Axioline F I/Os. With two Ethernet interfaces. Complete with connector and bus base module.
PLCnext Control with 4 x 10/100/1000 Ethernet, PROFINET controller with integrated PROFIsafe safety controller, PROFINET device, IP20 degree of protection, pluggable parameterization memory
PLC relay, consisting of base terminal block PLC-BSP.../21 with spring-cage connection and pluggable miniature relay with power contact, for assembly on DIN rail NS 35/7.5, 1 PDT, input voltage 230 V AC / 220 V DC
PLC logic starter kit 3, consisting of: plug-in stand-alone logic module (SAM 2), eight relay output terminal blocks with Push-in connection (250 V AC/DC, max. 6 A), and micro USB programming cable
PLC logic standalone logic module, generation�2, with 16�I/Os, for plug-in connection to 8 digital or analog PLC-INTERFACE terminal blocks, cannot be extended, integrated realtime clock, micro USB socket, accommodates memory block and Bluetooth adapter, push-in connection
PLC logic basic logic module, generation�2, with�16 I/Os, for plug-in connection to 8 digital or analog PLC-INTERFACE terminal blocks, can be extended to 48�I/Os, integrated realtime clock, micro USB socket, accommodates memory block and Bluetooth adapter, screw connection
PLC logic basic logic module, generation�2, with�16 I/Os, for plug-in connection to 8 digital or analog PLC-INTERFACE terminal blocks, can be extended to 48�I/Os, integrated realtime clock, micro USB socket, accommodates memory block and Bluetooth adapter, push-in connection
Patch panel, two RJ45 sockets, 10/100/1000�Mbps, DIN rail mounting, IP20, shield current monitoring, surge protection
Patch panel, RJ45 socket on screw terminal blocks, 10/100/1000�Mbps, DIN rail mounting, IP20, shield contacting with strain relief, shield current monitoring, surge protection
Patch panel, RJ45 socket on Push-in terminal blocks, 10/100/1000�Mbps, DIN rail mounting, IP20, shield contacting with strain relief, shield current monitoring, surge protection
Patch panel, RJ45 socket on IDC terminal blocks, 10/100/1000�Mbps, DIN rail mounting, IP20, shield contacting with strain relief, shield current monitoring, surge protection
Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV. Can be used for transmission speeds of up to 100 Mbps. Possible to connect two RJ45 plugs.
Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV. Can be used for transmission speeds of up to 100 Mbps. Connection using RJ45 and COMBICON plug-in screw terminal block.
Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV. Can be used for transmission speeds of up to 1 Gbps. Possible to connect two RJ45 plugs.