Uninterruptible power supply replacement battery for UPS-BAT/VRLA... energy storage
Repeater, for potential separation and range increase in RS-485 2-wire bus systems, 3-way isolation, rail-mountable
Repeater, for potential isolation and increasing the range in RS-485 2-wire LON bus systems, 3-way isolation, rail-mountable
Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range power supply, SIL, screw connection
Repeater power supply and input isolating amplifier, HART. Transfers supplied or active 0/4 - 20 mA signals to a load (active or passive). 3-way electrical isolation, SIL 2 according to IEC 61508.
Remote Field Controller with 4 x 10/100/1000 Ethernet, PROFINET controller with integrated PROFIsafe safety controller, PROFINET device, IP20 degree of protection, pluggable parameterization memory
Remote Field Controller with 3x10/100 Ethernet, INTERBUS-Master, PROFINET-Controller, PROFINET device, IP20 degree of protection, pluggable parameterization memory
Remote field controller with 3 x 10/100 Ethernet, INTERBUS master, PROFINET controller with integrated PROFIsafe safety controller, PROFINET device, IP20 protection, plug-in parameterization memory
RELAY WITH SOLID INPUT CONNECTION, LED AND PROTECTION IN THE INPUT AND OUTPUT CIRCUITS, INPUT: 110 V DC, OUTPUT: 8-48 V DC / MAX. 100 BUT, CAN BE GRANTED ON BASE TERMINALS
Relay module, with soldered-in industrial relay, contact: 2 PDTs, for multi-input fault warnings, with input diode array in P polarity (6 diodes 1N4007) and capacitor parallel to the coil as well as a multi-input light indicator, input voltage 230 V AC
Relay module, multi-channel, with 4 soldered-in miniature switching relays for DC voltage with light indicator and 1 PDT each, contact for medium to large loads, input voltage 24 V DC
Relay connector, equipped with Siemens KAMMRELAIS�, contacts (Ag): medium loads, 1 PDT, input voltage 24 V DC, with light indicator, can be plugged on basic termination blocks
Relay connector, equipped with Hengstler miniature round relay, contacts (AgSnO2+Au): small to large loads, 4 PDT, input voltage 24 V DC, with light indicator, can be plugged on basic termination blocks
Relay connector, equipped with Hengstler miniature round relay, contacts (AgSnO2+Au): small to large loads, 4 PDT, input voltage 220 V DC, with light indicator, can be plugged on basic termination blocks
Relay connector, equipped with Hengstler miniature round relay, contacts (AgSnO2+Au): small to large loads, 2 PDT, input voltage 220 V DC, with light indicator, can be plugged on basic termination blocks
Rail-mounted dual power outlet with two 120 V AC/15 A receptacles equipped with ground fault circuit interruption (GFCI) for 35 mm DIN rail per EN 60715
RAD-Line accessory case, contains the complete range of accessories required for testing different wireless paths
Radioline - USB data cable for communication between the PC and Radioline devices, energy supply for diagnostics and configuration via the USB port of the PC, cable length: 2�m / 6.5�ft
Radioline - RS-485 multipoint multiplexer, can be extended with I/O modules, can be used as Modbus/RTU bus coupler or can be combined with Radioline wireless system, up to 99�stations, range of up to 1.2�km on in-house copper cables
Radioline - I/O extension module, 8�digital transistor outputs (30.5�V�DC/200�mA)
Radioline - I/O extension module, 8�digital inputs (0�...�30.5�V�DC) or 2�pulse inputs up to 100�Hz
Radioline - I/O extension module, 4�digital inputs (0�...�250�V�AC/DC)
Radioline - I/O extension module, 4�analog current or voltage outputs (0/4�mA�...�20�mA, 0�V�...�10�V)
Radioline - I/O extension module, 4�analog current inputs (0/4�mA�...�20�mA)