PLC-INTERFACE for high inrush currents, consisting of PLC-BSC.../1 IC/ACT basic terminal block with screw connection and pluggable miniature relay, for mounting on DIN rail NS 35/7.5, max. inrush current up to 800 A, 1 N/O contact, 24 V DC input voltage
VARIOFACE front adapter for Siemens SIMATIC ET 200SP HA, with a 37-pos. D-SUB male strip for digital 24VDC and analog peripheral modules, max. 32 channels can be connected
Rugged-Touch panel with 30.7 cm/12.1" TFT-display (Analog resistive (GFG)), 800 x 600 pixel(s) (SVGA), 16.7 million colors, Arm Cortex-A8, 1000 MHz, 2x USB 2.0, 1x COM (RS-232), 1x COM (RS-422/485), 1 x Ethernet (10/100 Mbps), RJ45, Windows Embedded Compact 7 and user software: Visu+. (bus system: without)
Assembled, shielded, halogen-free round cable
RIF-2.../EX relay base for assembling with RTIII-sealed industrial relays with 4 changeover contacts for use in zone2, Push-in connection, plug-in option for input / interference suppression modules, for mounting on NS 35/7,5
RIF-2.../EX relay base for assembling with RTIII-sealed industrial relays with 4 changeover contacts for use in zone2, screw connection, plug-in option for input / interference suppression modules, for mounting on NS 35/7,5
Constant voltage source with pluggable connection technology for the generation of a highly precise constant voltage of 15V and for the supply of sensors without internal power supply. Screw connection technology.
Constant voltage source with pluggable connection technology for the generation of a highly precise constant voltage of 15V and for the supply of sensors without internal power supply. Push-in connection technology.
Single-phase solid-state contactor, input voltage: 24VDC, output current: 20A, zero voltage switch
Right-alignable Inline adapter terminal (INTERBUS master) for one PLCnext Control device for setting up a PLCnext Technology Inline station
14mm PLC basic terminal block without relay, for mounting on DIN rail NS35/7,5, Screw connection, 1 PDT, Input voltage 24 V AC/DC
14mm PLC basic terminal block without relay, for mounting on DIN rail NS35/7,5, Screw connection, 1 PDT, Input voltage 24 V AC/DC
14mm PLC basic terminal block without relay, for mounting on DIN rail NS35/7,5, Screw connection, 2 PDT, Input voltage 24 VDC
Modular power distribution board with CrossLink interface, 125 A, 3-pos., touch-proof and protection against polarity reversal, width: 405 mm
Modular power distribution board with CrossLink interface, 125 A, 3-pos., touch-proof and protection against polarity reversal, width: 225 mm
Fuse modular terminal block, without fuse plug, nom. voltage: 500 V, nominal current: 10 A, connection method: Screw connection
Insert label, For marking Siemens ET 200S controllers, Roll, turquoise, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker carrier, lettering field size: 1 x 50 mm x 13 mm and 1 x 28 mm x 13 mm, Number of individual labels: 500
0800040 ND 800040 SNAPIN MARKER FOR SIEMEN CONTROL.
0800049 ND 800049 INSERT LABEL.
0800054 ND 800054 INSERT LABE YELLOW.
Insert label, for the Inline modules from Phoenix Contact, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker carrier, lettering field size: 62 x 10 mm, Number of individual labels: 500
0830766 ND 830766 UCT EM (7X10) CUS.
AXC 1050 PN starter kit including AXC 1050 controller, AXL F BK PN bus coupler, AXL F DI/DO 16 I/O modules, power supply, PC Worx software with quick start guide, and additional accessories
307726 UMK-SE 11,25 HOUSING.