Simatic S7/PCS7, SM322 Digital Output MODULE, 16 DO, DC 24 V / 0,5A, CAPABLE OF DIAGNOSTICS, WIRE BREAK DETECTION TO 0 and 1 SIGNAL, 1 X 40-PIN, Interface Module IM 153-2 NECESSARY
SIMATIC S7, analog output SM 332, isolated, 4 AA; 0/4 to 20 mA, 20-pole, for signals from the hazardous area, diagnostics-capable, PTB tested
SIMATIC DP, HART analog input SM 331, 2 AI, 0/4 - 20 mA HART, to HART rev. 5.0, for ET200M with IM 153-2, 1 x 20-pole
ULTRASONIC POSITION DECODER MODULE. THE SM 338 MEASURES POSITION VIA ULTRASONIC MEASU- RING DEVICES WITH START/STOP INTERFACE; E.G. BY BALLUFF OR MTS
SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATATED, 8 AI THERMOCOUPLE, TYPE B, E, J, K, L, N, R, S, T 16 BIT, 50 MS, 40 PIN
SIMATIC S7-300, ANALOG MODULE SM 335, OPTICALLY ISOLATED U/I; DIAGNOSTICS; INTERRUPT, 4 AI 14 BIT RESOL., 4 AO 11/12 BIT
SIMATIC S7-300, Analog output SM 332, isolated by channel, 4 AI, Resolution 16 bit, 0-10 V, 1-5 V, +/-10 V, +/-20 mA, 0/4-20mA, 20-pole, suitable for isochronous mode improved bus cycle times for the isochronous mode
SIMATIC DP, HART analog input SM 331, 2 AI, 0/4 - 20 mA HART, as of HART Rev. 5.0, for ET200M with IM 153-2, 1 x 20-pole
SIMATIC S7, Digital output SM 326, 10 DO, 24 V DC, 2A, fail-safe digital output for SIMATIC S7F systems, with diagnostic alarm, 1x 40-pole
ET200M for Fuji Electric based on SIMATIC S7-300, analog input SM 331, isolated, 8 AI, resolution 14 bit, 0.052 ms/channel current, voltage alarm, diagnostics, 1 x 20-pole, suitable for isochronous mode Improved bus cycle time for isochronous mode
SIMATIC S7,SM 332 ANALOG OUTPUT CHANNEL TO CHANNEL ISOLATION, 4 AO, 15 BIT RESOLUTION, 0-10V, 1-5V, +/-10V, +/-20MA, 0/4 - 20MA, 20 PIN, FIT FOR ISOCHRONE MODE
ET200M for Fuji Electric based on SIMATIC S7-300, analog input SM331, isolated, 8 AI thermocouples Type B, E, J, K, L, N, R, S, T TXK/TXK(L) according to GOST 16 bit, 50 ms 1 x 40-pole
Simatic S7-300, ANALOG Input SM331, Optically ISOLATED, 8 AI, 13 BIT RESOLUTION, U/I/RESISTANCE/PT100, NI100, NI1000, LG-NI1000, PTC / KTY, 66 MS Module UPDATE, 1 X 40 PIN
Simatic S7-300, ANALOG Input SM331, OPT. ISOL.,2/3/4 WIRE, 8AI, RESISTANCE, PT100/200/1000 NI100/120/200/500/1000, CU10, PLUS CHARACTERISTICS ACCORDING TO GOST Standard 16 (INTERN 24) BIT, 50MS, 1 X 40 PIN
SIMATIC DP, HART analog input SM 331, 8 AI, 0/4 - 20 mA HART, for ET200M with interface IM 153-2, 20-pole
ET200M for Fuji Electric based on SIMATIC S7-300, analog input SM331, isolated, 2/3/4-wire, 8 AI, resistor, PT100/200/1000 NI100/120/200/500/1000, CU10, characteristics according to GOST 16 (internal 24) bit, 50 ms 1 x 40-pole
SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit, Single rooting (60 V COM.), 4-channel operation: 10 ms, 8-channel operation: 23-95ms, 1x 40-pole
SIMATIC S7-300, ANALOG INPUT SM 331, OPT. ISOL.,2/3/4 WIRE, 8AI, RESISTANCE, PT100/200/1000 NI100/120/200/500/1000, CU10, 16 (INTERN 24) BIT, 50MS,40 PIN
ET200M for Fuji Electric based on SIMATIC S7-300, analog input SM331, isolated 8 AI, resolution 13 bits U/I/Resistor/Pt100, NI100, NI1000, LG-NI1000, PTC / KTY, 66 ms conversion time 1 x 40-pole
SIEMENS SIMATIC S7-300 SM 331 INDIVIDUALLY ISOLATATED AC250V, 6 AI THERMOCOUPLE, TYPE B, E, J, K, L, N, R, S, T VOLTAGE: +/-25MV BIS +/-1V 16 BIT, 50 MS, 1 X 40 PIN
SIMATIC S7, Digital output SM 326, F-DO 8x24 V DC/2A PM fail-safe digital output Switching to P-M potential up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-pole
ET200M FOR FUJI ELECTRIC BASED ON SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 8 AE +/-5/10V, 1-5 V, +/-20MA, 0/4 TO 20MA, 16 BIT, 1 COMMON POINT(60 V COM.), 4 CHANNEL MODE: 10 MS, 8 CHANNEL MODE: 23-95 MS, 1 X 40 PIN
SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, U/I/THERMOCOUPLE/RESISTANCE INTERRUPT, DIAGNOSTICS; RESOLUTION 9/12/14 BITS, 8AI, REMOVE/INSERT W. BACKPLANE BUS 20 PIN
SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 8 AI, 13 BIT RESOLUTION, U/I/RESISTANCE, PT100, 66 MS MODULE UPDATE, 40 PIN