DISTRIBUTED I/O

SIMATIC ET 200SP, BUNDLE PROFINET IM, IM155-6PN ST, MAX. 32 PERIPHERY MODULES AND 16 ET 200AL MODULES, SINGLE HOT SWAP, BUNDLE CONTAINS: INTERFACEMODULE (6ES7155-6AU01-0BN0), SERVERMODULE (6ES7193-6PA00-0AA0), BUSADAPTER BA 2X RJ45 (6ES7193-6AR00-0AA0)

SIMATIC ET 200SP, PROFINET interface module IM155-6PN standard, max. 32 periphery moduls and 16 ET 200AL modules, single hot swap, incl. server module (6ES7193-6PA00-0AA0) Notes For this product a successor is available: 6ES7155-6AU00-0BN0

Simatic ET 200SP, BUSADAPTER BA 2X RJ45, 2 RJ45 SOCKETS FOR PROFINET

SIMATIC DP, Electronics module ET 200SP, F-DQ 8XDC 24V0.5A PP, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)

Simatic ET 200SP, BASEUnit BU15-P16+A0+2B, BU-TYPE A0, PUSH-IN TERMINALS, W/O AUX-TERMINALS, BRIDGED TO LEFT BU WXH: 15MMX117MM

Simatic ET 200SP, PROFINET Interface Module IM155-6PN Basic, MAX. 12 PERIPHERY Modules, 2X Integrated RJ45 SOCKETS INCL. SERVERMODUL,

SIMATIC ET 200SP, PROFINET 2-port interface module IM155-6PN/2 High Feature, 1 slot for SIMATIC BusAdapter, max. 64 Periphery modules and 16 ET 200AL modules, S2 redundancy, Multi Hot swapping, 0,25ms isochronous mode, inclusive server module

SIMATIC DP, POWER RAIL BOOSTER SIGNAL AMPLIFIER FOR TRANSMITTING THE PROTOCOL OF PROFIBUS-DP USING COLLECTOR WIRES, MAX 500 KBIT/S

Simatic ET 200MP. PROFINET IO-DEVICE InterfaceMODULE IM 155-5 PN HF FOR ET 200MP ELEKTRONIKModules; UP TO 12 IO-Modules WITHOUT ADDITIONAL PS; UP TO 30 IO- Modules with ADDITIONONAL PS SHARED DEVICE; MRP; IRT >=0.25MS; ISOCHRONICITY FW-UPDATE; I&M0...3; FAST STARTUP S2 REDUNDANCY; SHARED DEV. with 4 Controller

SIMATIC DP, IM151-8F PN/DP CPU FOR ET200S, 256 KB WORKING MEMORY, INT. PROFINET INTERFACE (WITH THREE RJ45 PORTS) AS IO-CONTROLLER, W/O BATTERY MMC REQUIRED

SIMATIC ET 200SP, PROFINET INTERFACE MODULE IM155-6PN STANDARD, MAX. 32 PERIPHERY MODULES, INCL. SERVER MODULE

SIMATIC DP, INTERFACE MODULE IM151-1 STANDARD FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; DATA VOLUME 128BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 POWER, ELECTR. OR MOTOR STARTER MODULES UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D INCL. TERMINATING MODULE

SIMATIC ET 200SP HA, PROFINET interface module IM155-6 PN max. 56 I/O modules, multi-hot swap, without server module

SIROTEC ACR, SINGLE COMPONENT 6FX1122-3CA01 DIGITAL I/O MODULE, 32 I/O (0.1 A)

SIMATIC ET 200SP OPEN CONTROLLER, CPU 1515SP PC + HMI 512PT, 4 GB RAM, 30 GB CFAST WITH WINDOWS EMBEDDED STANDARD 7 P 64BIT PREINSTALLED, W. S7-1500 SOFTWARE CONTROLLER CPU 1505SP PREINSTALLED, WITH WINCC RUNTIME ADVANCED V14 PREINSTALLED WITH 512 POWERTAGS LICENSE, INTERFACES: 1X SLOT CFAST, 1X SLOT SD/MMC, 1X PLUG F. ET 200SP BUS- ADAPTOR PROFINET, 1X 10/100/1000 MBIT/S ETHERNET, 3 X USB, 1 X DVI-I GRAPHIC INTERFACE, DOCUMENTATION ON DVD, RESTORE DVD

SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE OUTGOING CABLE, 15,8 X 59 X 35,6 MM (WXHXD), IPCD TECHOLOGY FAST CONNECT, WITH PG SOCKET 100 PIECES PER PACKAGING UNIT

Simatic DP, BUS Unit BM IM 157 FOR EXPANDED TEMPERATURE RANGE SUBMODULE FOR IM157 and IM153-2 FOR INSERT/REMOVE FUNCTION WHILE OPERATING MODE RUN

SIMATIC DP, distributed I/O Field device connection RS 485-IS coupler, Fieldbus coupler between PROFIBUS DP and RS485-IS, for controlling intrinsically safe PROFIBUS nodes, installation in hazardous zone 2, for extended temperature range Degree of protection IP20