SIMODRIVE 611-D Control Unit 1-axis for digital drive, FS + RS, without direct measuring system, performance control
SIMODRIVE 611-A PLUG-IN CLOSED-LOOP CONTROL UNIT, 1-AXIS, FOR FEED DRIVES WITH 1FT5, STANDARD INTERFACE
SIMODRIVE 611-A Control Unit 1-axis for feed drives with 1FT5, standard interface
***SPARE PART*** SIMODRIVE 611-A CLOSED-LOOP PLUG-IN CONTROL UNIT, 1 AXIS, FOR FEED DRIVES WITH 1FT5, ENHANCED INTERFACE
SIMODRIVE 611 UNIVERSAL OPT. PLUG-IN UNIT PROFIBUS DP, PROFIBUS UNIT DP-NORM-SLAVE FOR CYCLIC AND ACYCLIC DATA EXCHANGE
SIMODRIVE 611-A, SPARE PART SETTING MODULE FOR FEED MODULE ENHANCED INTERFACE
SIMODRIVE 611 PULSED RESISTOR MODULE, INTER. RESISTANCE FOR 0.3/25 KW UNIVERSAL HOUSING FOR 211/288 MM DEPTH
SIMODRIVE 611 Pulsed resistor module, internal resistor for 0.3/25 kW universal enclosure for 211/288 mm depth
SIMODRIVE 611 Monitoring module, universal enclosure for 211/288 mm depth
SIMODRIVE 611 HF REACTOR, 36/47 KW FOR SINUSOIDAL AND BLOCK-TYPE CURRENT
SIMODRIVE 611 HF REACTOR, 16/21 KW FOR SINUSOIDAL AND BLOCK-TYPE CURRENT
***SPARE PART*** SIMODRIVE 611-A CLOSED-LOOP PLUG-IN CONTROL UNIT, 1 AXIS, FOR FEED DRIVES WITH 1FT5, ENHANCED INTERFACE
SINAMICS Safe brake relay for Power Module With SINAMICS S120 released as of V2.6!
SINAMICS G120 CU240E-2 DP-F Control Unit E-type Safety Integrated STO F-type SS1, SLS, SSM, SDI PROFIBUS DP 6 DI, 3 DQ, 2 AI, 2 AQ, max. 3 F-DI PTC/KTY interface USB and SD/MMC interface Degree of protection IP20 Ambient temperature 0 to +50 °C without Power Module
SINAMICS G120 Control Unit CU240B-2 B type RS485 interface with USS/MODBUS RTU protocol 4 DI, 1 DO, 1 AI, 1 AO PTC/KTY/Thermoclick Interface USB and SD/MMC interface Degree of protection IP20 Ambient temperature 0 to +50 °C without Power Module
SINAMICS G120 Control Unit CU240E E-Type Standard RS485 interface, USS protocol 6 DI, 3 DO, 2 AI, 2 AO PTC/KTY interface EM brake relay Degree of protection IP20 Ambient temperature -10 to +50 °C without Power Module and BOP
Sinamics G120 POWER Module PM240 with BUILT IN CL. A FILTER with BULT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 2,2KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP -10 TO +50 DEG C 270 X 153 X 165 (HXWXD), FSB Protection IP20 WITHOUT Control Unit and BOP
SINAMICS G120 PM 240 Power Module unfiltered with integrated braking chopper 380-480 V 3 AC +10/-10% 47-63 Hz Power high overload: 1.1 kW at 200% 3s, 150% 57s, 100% 240 s; Ambient temperature -10 to +50 °C 173x 73x 145 (HxWxD), FSA Degree of protection IP20 without Control Unit and BOP
Sinamics G120 POWER Module PM240 WITHOUT FILTER with BULT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 0,55KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP -10 TO +50 DEG C 173 X 73 X 145 (HXWXD), FSA Protection IP20 WITHOUT Control Unit and BOP
Sinamics G120 POWER Module PM230 UNFILTERED Protection IP20 / PT 3AC380-480V +10/-10% 47-63HZ OUTPUT LOW OVERLOAD: 3KW FOR 150% 3S,110% 57S,100% 240S AMBIENT TEMP 0 TO +40 DEG C(LO) 238 X 126 X 171 (HXWXD), FSA WITHOUT Control Unit and Panel APPROVED FOR CU240B/E-2 and CU230P-2 FIRMWARE-Version V4.4 NOTE: PM230 DOES NOT SUPPORT SAFETY Notes For this product a successor is available: 6SL3211-1NE17-7UG1
SINAMICS G110-CPM110 AC Drive, with integr. filter B 200-240V1AC+10/-10% 47-63Hz Analog input CT: 0.37kW; VT: 0.37kW CT overload: 150% 60s 150x 90x 116 (HxWxD) Degree of protection IP20 Ambient temperature -10+50 °C without BOP without RS485 interface
Sinamics G110 - CPM110 AC-DRIVE,BUILT IN CL. B FILTER 1AC200-240V +10/-10% 47-63HZ ANALOG Input CT: 0.25KW; VT: 0.25KW CT-OVERLOAD: 150% 60S 150 X 90 X 116 (HXWXD) Protection IP20 AMBIENT TEMP -10 TO +50 DEG C WITHOUT BOP WITHOUT RS485-INTERFACE