This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. This is a kit comprising a bus coupler designed for creating distributed IO islands on Ethernet, exchanging data between controller and distributed IO. It has 2 connectors type RJ45 for an Ethernet daisy chain shielded connection. It uses the EtherNet/IP protocol. This is a bus coupler module designed for creating distributed IO islands on the Ethernet network. The exchange mode of data is half duplex, full duplex, autonegotiation, auto MDIX. with a transmission rate of 10megabit/s to 100megabit/s. It is furnished with removable spring terminal block for electrical connection. It is an IP20 rated product. It weighs 0.080kg. It measures 38mm wide, 99mm high, 75mm deep. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. It is compatible with PacDrive LMC Eco/Pro2 motion controllers, Modicon M241/M251 logic controllers, and the Modicon M262 logic/motion controller. The kit includes bus sub-base TM5ACBN1, terminal block TM5ACTB12PS, CANopen module TM5NEIP1 and power supply unit TM5SPS3. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.
Main
| Characteristic | Value(s) |
|---|---|
| Product or component type | Kit for bus coupler module |
| Product specific application | Bus coupler module |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range compatibility | Modicon TM5 Modicon TM7 |
| Product compatibility | Logic controller Motion controller |
| Integrated connection type | Ethernet/IP |
| Connector type | RJ45 2 Ethernet daisy chain shielded |
| Exchange mode | Half duplex, full duplex, autonegotiation, auto MDIX |
| Transmission rate | 10/100 Mbit/s |
| Web server | Embedded |
| Device composition | Bus base for fieldbus interface module TM5ACBN1 TM5ACBN1 Terminal block TM5ACTB12PS EtherNet/IP fieldbus interface module TM5NEIP1 Power distribution module TM5SPS3 TM5NEIP1 TM5SPS3 |
| Local signalling | 1 LED green/red for module status 1 LED green/red for network 1 LED green for Ethernet activity (ETH1) 1 LED green for Ethernet activity (ETH2) |
| Marking | CE EAC UL CSA |
| Connector type | Removable spring connector <= 50 insertion/removal cycles |
| Width | 38 mm |
| Height | 99 mm |
| Depth | 75 mm |
| Product weight | 0.08 kg |
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator