Keyence

SZ-V04 Keyence

Specifications

Model				SZ-V04 ^*1
Type				Multi-function Type
Detection capability	Minimum detectable object size			Diameter 20, 30, 40, 50, 70, 150 mm 0.79", 1.18", 1.57", 1.97", 2.76", 5.91" (depends on the setting) Reflectance 1.8% min., Speed 1.6 m/s 5.25 ft/s max. ^*2
	Detectable angle			190° ( -5° to 185° )
	Response time (ON to OFF)	Standard Mode	Scan Cycle A	160 ms (2scans) to 1280 ms (16scans) ^3 ^4
			Scan Cycle B	168 ms (2scans) to 1344 ms (16scans) ^3 ^4
			Scan Cycle C	176 ms (2scans) to 1408 ms (16scans) ^3 ^4
		High Speed Mode	Scan Cycle A	80 ms (2scans) to 640 ms (16scans) ^3 ^4
			Scan Cycle B	84 ms (2scans) to 672 ms (16scans) ^3 ^4
			Scan Cycle C	88 ms (2scans) to 704 ms (16scans) ^3 ^4
	Response time (OFF to ON)			Response time (ON to OFF) + 150 ms
	Protection zone	Minimum detectable object size: 70 / 150 mm 2.76" / 5.91"		8.4 m 27.56' (Standard Mode) 5.7 m 18.70' (High Speed Mode)
		Minimum detectable object size: 50 mm 1.97"		5.6 m 18.37' (Standard Mode) 3.8 m 12.47' (High Speed Mode)
		Minimum detectable object size: 40 mm 1.57"		4.3 m 14.11' (Standard Mode) 2.9 m 9.51' (High Speed Mode)
		Minimum detectable object size: 30 mm 1.18"		2.9 m 9.51' (Standard Mode) 2.0 m 6.56' (High Speed Mode)
		Minimum detectable object size: 20 mm 0.79"		1.6 m 5.25' (Standard Mode) 1.1 m 3.61' (High Speed Mode)
	Warning zone	Minimum detectable object size: 70 / 150 mm 2.76" / 5.91"		26 m 85.30' (Standard Mode) 23 m 75.46' (High Speed Mode) ^*5
		Minimum detectable object size: 50 mm 1.97"		25 m 82.02' (Standard Mode) 21 m 68.90' (High Speed Mode) ^*5
		Minimum detectable object size: 40 mm 1.57"		24 m 78.74' (Standard Mode) 20 m 65.62’ (High Speed Mode) ^*5
		Minimum detectable object size: 30 mm 1.18"		23 m 75.46' (Standard Mode) 18 m 59.06' (High Speed Mode) ^*5
		Minimum detectable object size: 20 mm 0.79"		21 m 68.90' (Standard Mode) 15 m 49.21' (High Speed Mode) ^*5
	Additional safety distance			100 mm 3.94" ^*6
	Maximum measurement distance			60 m 196.85' ^*7
Maximum number of banks				Max. 4 banks
Multiple scanner heads				Max. 3 scanner heads
Camera monitoring area				Monitor area: over 190° (-5° to 185°) ^*8
Display				QVGA 2.2inch color LCD
Light source	Type, wavelength			Infrared laser diode, 905 nm
	Laser Class	IEC		Class1 IEC/EN60825-1
		FDA		Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice) ^*9
		JIS		Class1 JIS C6802
Control output (OSSD)	Output			Transistor outputs (NPN or PNP is selected in the software)
	Number of outputs			4 outputs
	Max. load current			500 mA ^*10
	Residual voltage (during ON)			Max. 2.5 V (with a cable length of 5 m 16.40')
	OFF-state voltage			Max. 2.0 V (with a cable length of 5 m 16.40')
	Leakage current			Max. 1 mA ^*11
	Max. capacitive load			2.2 μF (with a load resistance of 100 Ω)
	Load wiring resistance			Max. 2.5 Ω
Inputs	PNP			ON-voltage: 10 to 30 V, OFF-voltage: Open or 0 to 3 V, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)
	NPN			ON-voltage: 0 to 3 V, OFF-voltage: Open or 10 V to Power voltage, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)
Non-safety related output (AUX output)	Output type			Transistor outputs (NPN or PNP is selected by the dedicated PC software)
	Number of outputs			6 outputs
	Max. load current			Max. 50 mA
	Residual voltage (during ON)			Max. 2.5 V (with a cable length of 5 m 16.40')
	Muting lamp			Incandescent lamp (24 VDC, 1 to 5.5 W) or LED lamp (load current: 10 to 230 mA) can be connected
Interface	USB			USB2.0
	Ethernet	Standard		-
		Transmission rate
		Cable
		Connector
Network function
Cable length	Power and I/O cable			30 m 98.43' or less ^*12
	Between scanner head and display unitc			20 m 65.62' or less each ^*13
	Ethernet cable			-
Approved standards	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety			IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR), IEC61508, EN61508, EN ISO13849-1, 2015 (PLd, Category3), UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rating	Power consumption			11.8 W (without load), 55.0 W (with load) ^*14
	Power voltage			24 VDC ±10% (Ripple P-P 10% or less): When using a converter power supply, 24 VDC +20%/-30%: When using a battery
Environmental resistance	Enclosure rating			IP65(IEC60529)
	Ambient light			Incandescent lamp: 1500 lux or less ^*15
	Operating ambient temperature			-10 to +50°C 14 to 122°F (No freezing)
	Operating relative humidity			35% to 85% RH (No condensation)
	Storage temperature			-25 to +60°C -13 to +140°F (No freezing)
	Storage relative humidity			35% to 95% RH
	Vibration resistance			10 to 55 Hz, 0.7 mm 0.03" compound amplitude, 20 sweeps each in X, Y, and Z directions
	Shock resistance			100 m/s² 328.08 ft/s² (Approx. 10 G) 16 ms pulse, in X, Y, Z directions 1000 times each axis
Material	Scanner head	Main unit case		Magnesium
		Window		Polycarbonate, PEI
		Indicator part		Aluminum, PES
	Display unit	Case		Magnesium, PPS, Polycarbonate
	System memory			Aluminum, PPE
Weight				Approx. 2100 g
^1 Integrated models include display unit, scanner head, system memory and a connection cable (SZ-VS005). ^2 If the object to be detected moves parallel to the detection plane, SZ-V cannot detect the object moving at speed over 1.6 m/s 5.25 ft/s, regardless of the encoder setting. ^3 The response time, protection zone, and warning zone are affected by the operation mode. ^4 When using PROFIsafe, 6 ms is added to the response time. When using CIP Safety, 10ms is added to the response time. ^5 20% or more reflectance is necessary for the minimum detectable object in the warning zone. ^6 If there is a highly reflective background within 1.5 m 4.92' from the boundary of the protection zone, 200 mm 7.87" must be added as supplementary necessary distance to the protection zone when calculating the minimum safety distance. ^7 Even when using the network data output, the maximum measured output distance is 60 m 196.85'. ^8 Only applicable for the type with a camera. ^9 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^10 For the SZ-V04 type and the SZ-V32 type, the load current calculation of the OSSD output and AUX output is 1.5 A or less when using one scanner head, 1.0 A or less when using two scanner heads, and 0.5 A or less when using three scanner heads. For the SZ-V32N type, the load current calculation of the OSSD output and AUX output is 1.2 A or less when using one scanner head, 0.8 A or less when using two scanner heads, and 0.3 A or less when using three scanner heads. ^11 Includes when the power is OFF. ^12 10 m 32.81' or less when supplying power from a battery. ^13 When supplying power from a battery, the length of each connection cable should be 10 m 32.81' or less when using two scanner heads, and 5 m 16.40' or less when using three scanner heads. ^14 When using the SZ-V with series connected sensor heads, it is necessary to add 9.4 W per scanner head. Also, power consumption may temporarily be higher (maximum 3.6 W). Power consumption will be within the specification after SZ-V moves to normal operation. ^*15 An ambient light source should not be located within ±5° of the detection plane.

22,758.00 kr

1-year warranty

FREE WORDWIDE SHIPPING

Est. delivery between and

Condition:

Sealed Surplus

SKU: SZ-V04-Sealed

7 verified stock

22,758.00 kr

Never Used Surplus

SKU: SZ-V04

3 verified stock

21,049.00 kr

Used

SKU: SZ-V04-Used

4 verified stock

14,971.00 kr

Variant

Quantity:

Need More?

Specifications

Model				SZ-V04 ^*1
Type				Multi-function Type
Detection capability	Minimum detectable object size			Diameter 20, 30, 40, 50, 70, 150 mm 0.79", 1.18", 1.57", 1.97", 2.76", 5.91" (depends on the setting) Reflectance 1.8% min., Speed 1.6 m/s 5.25 ft/s max. ^*2
	Detectable angle			190° ( -5° to 185° )
	Response time (ON to OFF)	Standard Mode	Scan Cycle A	160 ms (2scans) to 1280 ms (16scans) ^3 ^4
			Scan Cycle B	168 ms (2scans) to 1344 ms (16scans) ^3 ^4
			Scan Cycle C	176 ms (2scans) to 1408 ms (16scans) ^3 ^4
		High Speed Mode	Scan Cycle A	80 ms (2scans) to 640 ms (16scans) ^3 ^4
			Scan Cycle B	84 ms (2scans) to 672 ms (16scans) ^3 ^4
			Scan Cycle C	88 ms (2scans) to 704 ms (16scans) ^3 ^4
	Response time (OFF to ON)			Response time (ON to OFF) + 150 ms
	Protection zone	Minimum detectable object size: 70 / 150 mm 2.76" / 5.91"		8.4 m 27.56' (Standard Mode) 5.7 m 18.70' (High Speed Mode)
		Minimum detectable object size: 50 mm 1.97"		5.6 m 18.37' (Standard Mode) 3.8 m 12.47' (High Speed Mode)
		Minimum detectable object size: 40 mm 1.57"		4.3 m 14.11' (Standard Mode) 2.9 m 9.51' (High Speed Mode)
		Minimum detectable object size: 30 mm 1.18"		2.9 m 9.51' (Standard Mode) 2.0 m 6.56' (High Speed Mode)
		Minimum detectable object size: 20 mm 0.79"		1.6 m 5.25' (Standard Mode) 1.1 m 3.61' (High Speed Mode)
	Warning zone	Minimum detectable object size: 70 / 150 mm 2.76" / 5.91"		26 m 85.30' (Standard Mode) 23 m 75.46' (High Speed Mode) ^*5
		Minimum detectable object size: 50 mm 1.97"		25 m 82.02' (Standard Mode) 21 m 68.90' (High Speed Mode) ^*5
		Minimum detectable object size: 40 mm 1.57"		24 m 78.74' (Standard Mode) 20 m 65.62’ (High Speed Mode) ^*5
		Minimum detectable object size: 30 mm 1.18"		23 m 75.46' (Standard Mode) 18 m 59.06' (High Speed Mode) ^*5
		Minimum detectable object size: 20 mm 0.79"		21 m 68.90' (Standard Mode) 15 m 49.21' (High Speed Mode) ^*5
	Additional safety distance			100 mm 3.94" ^*6
	Maximum measurement distance			60 m 196.85' ^*7
Maximum number of banks				Max. 4 banks
Multiple scanner heads				Max. 3 scanner heads
Camera monitoring area				Monitor area: over 190° (-5° to 185°) ^*8
Display				QVGA 2.2inch color LCD
Light source	Type, wavelength			Infrared laser diode, 905 nm
	Laser Class	IEC		Class1 IEC/EN60825-1
		FDA		Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice) ^*9
		JIS		Class1 JIS C6802
Control output (OSSD)	Output			Transistor outputs (NPN or PNP is selected in the software)
	Number of outputs			4 outputs
	Max. load current			500 mA ^*10
	Residual voltage (during ON)			Max. 2.5 V (with a cable length of 5 m 16.40')
	OFF-state voltage			Max. 2.0 V (with a cable length of 5 m 16.40')
	Leakage current			Max. 1 mA ^*11
	Max. capacitive load			2.2 μF (with a load resistance of 100 Ω)
	Load wiring resistance			Max. 2.5 Ω
Inputs	PNP			ON-voltage: 10 to 30 V, OFF-voltage: Open or 0 to 3 V, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)
	NPN			ON-voltage: 0 to 3 V, OFF-voltage: Open or 10 V to Power voltage, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)
Non-safety related output (AUX output)	Output type			Transistor outputs (NPN or PNP is selected by the dedicated PC software)
	Number of outputs			6 outputs
	Max. load current			Max. 50 mA
	Residual voltage (during ON)			Max. 2.5 V (with a cable length of 5 m 16.40')
	Muting lamp			Incandescent lamp (24 VDC, 1 to 5.5 W) or LED lamp (load current: 10 to 230 mA) can be connected
Interface	USB			USB2.0
	Ethernet	Standard		-
		Transmission rate
		Cable
		Connector
Network function
Cable length	Power and I/O cable			30 m 98.43' or less ^*12
	Between scanner head and display unitc			20 m 65.62' or less each ^*13
	Ethernet cable			-
Approved standards	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety			IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR), IEC61508, EN61508, EN ISO13849-1, 2015 (PLd, Category3), UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rating	Power consumption			11.8 W (without load), 55.0 W (with load) ^*14
	Power voltage			24 VDC ±10% (Ripple P-P 10% or less): When using a converter power supply, 24 VDC +20%/-30%: When using a battery
Environmental resistance	Enclosure rating			IP65(IEC60529)
	Ambient light			Incandescent lamp: 1500 lux or less ^*15
	Operating ambient temperature			-10 to +50°C 14 to 122°F (No freezing)
	Operating relative humidity			35% to 85% RH (No condensation)
	Storage temperature			-25 to +60°C -13 to +140°F (No freezing)
	Storage relative humidity			35% to 95% RH
	Vibration resistance			10 to 55 Hz, 0.7 mm 0.03" compound amplitude, 20 sweeps each in X, Y, and Z directions
	Shock resistance			100 m/s² 328.08 ft/s² (Approx. 10 G) 16 ms pulse, in X, Y, Z directions 1000 times each axis
Material	Scanner head	Main unit case		Magnesium
		Window		Polycarbonate, PEI
		Indicator part		Aluminum, PES
	Display unit	Case		Magnesium, PPS, Polycarbonate
	System memory			Aluminum, PPE
Weight				Approx. 2100 g
^1 Integrated models include display unit, scanner head, system memory and a connection cable (SZ-VS005). ^2 If the object to be detected moves parallel to the detection plane, SZ-V cannot detect the object moving at speed over 1.6 m/s 5.25 ft/s, regardless of the encoder setting. ^3 The response time, protection zone, and warning zone are affected by the operation mode. ^4 When using PROFIsafe, 6 ms is added to the response time. When using CIP Safety, 10ms is added to the response time. ^5 20% or more reflectance is necessary for the minimum detectable object in the warning zone. ^6 If there is a highly reflective background within 1.5 m 4.92' from the boundary of the protection zone, 200 mm 7.87" must be added as supplementary necessary distance to the protection zone when calculating the minimum safety distance. ^7 Even when using the network data output, the maximum measured output distance is 60 m 196.85'. ^8 Only applicable for the type with a camera. ^9 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^10 For the SZ-V04 type and the SZ-V32 type, the load current calculation of the OSSD output and AUX output is 1.5 A or less when using one scanner head, 1.0 A or less when using two scanner heads, and 0.5 A or less when using three scanner heads. For the SZ-V32N type, the load current calculation of the OSSD output and AUX output is 1.2 A or less when using one scanner head, 0.8 A or less when using two scanner heads, and 0.3 A or less when using three scanner heads. ^11 Includes when the power is OFF. ^12 10 m 32.81' or less when supplying power from a battery. ^13 When supplying power from a battery, the length of each connection cable should be 10 m 32.81' or less when using two scanner heads, and 5 m 16.40' or less when using three scanner heads. ^14 When using the SZ-V with series connected sensor heads, it is necessary to add 9.4 W per scanner head. Also, power consumption may temporarily be higher (maximum 3.6 W). Power consumption will be within the specification after SZ-V moves to normal operation. ^*15 An ambient light source should not be located within ±5° of the detection plane.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Specifications

Model				SZ-V04 ^*1
Type				Multi-function Type
Detection capability	Minimum detectable object size			Diameter 20, 30, 40, 50, 70, 150 mm 0.79", 1.18", 1.57", 1.97", 2.76", 5.91" (depends on the setting) Reflectance 1.8% min., Speed 1.6 m/s 5.25 ft/s max. ^*2
	Detectable angle			190° ( -5° to 185° )
	Response time (ON to OFF)	Standard Mode	Scan Cycle A	160 ms (2scans) to 1280 ms (16scans) ^3 ^4
			Scan Cycle B	168 ms (2scans) to 1344 ms (16scans) ^3 ^4
			Scan Cycle C	176 ms (2scans) to 1408 ms (16scans) ^3 ^4
		High Speed Mode	Scan Cycle A	80 ms (2scans) to 640 ms (16scans) ^3 ^4
			Scan Cycle B	84 ms (2scans) to 672 ms (16scans) ^3 ^4
			Scan Cycle C	88 ms (2scans) to 704 ms (16scans) ^3 ^4
	Response time (OFF to ON)			Response time (ON to OFF) + 150 ms
	Protection zone	Minimum detectable object size: 70 / 150 mm 2.76" / 5.91"		8.4 m 27.56' (Standard Mode) 5.7 m 18.70' (High Speed Mode)
		Minimum detectable object size: 50 mm 1.97"		5.6 m 18.37' (Standard Mode) 3.8 m 12.47' (High Speed Mode)
		Minimum detectable object size: 40 mm 1.57"		4.3 m 14.11' (Standard Mode) 2.9 m 9.51' (High Speed Mode)
		Minimum detectable object size: 30 mm 1.18"		2.9 m 9.51' (Standard Mode) 2.0 m 6.56' (High Speed Mode)
		Minimum detectable object size: 20 mm 0.79"		1.6 m 5.25' (Standard Mode) 1.1 m 3.61' (High Speed Mode)
	Warning zone	Minimum detectable object size: 70 / 150 mm 2.76" / 5.91"		26 m 85.30' (Standard Mode) 23 m 75.46' (High Speed Mode) ^*5
		Minimum detectable object size: 50 mm 1.97"		25 m 82.02' (Standard Mode) 21 m 68.90' (High Speed Mode) ^*5
		Minimum detectable object size: 40 mm 1.57"		24 m 78.74' (Standard Mode) 20 m 65.62’ (High Speed Mode) ^*5
		Minimum detectable object size: 30 mm 1.18"		23 m 75.46' (Standard Mode) 18 m 59.06' (High Speed Mode) ^*5
		Minimum detectable object size: 20 mm 0.79"		21 m 68.90' (Standard Mode) 15 m 49.21' (High Speed Mode) ^*5
	Additional safety distance			100 mm 3.94" ^*6
	Maximum measurement distance			60 m 196.85' ^*7
Maximum number of banks				Max. 4 banks
Multiple scanner heads				Max. 3 scanner heads
Camera monitoring area				Monitor area: over 190° (-5° to 185°) ^*8
Display				QVGA 2.2inch color LCD
Light source	Type, wavelength			Infrared laser diode, 905 nm
	Laser Class	IEC		Class1 IEC/EN60825-1
		FDA		Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice) ^*9
		JIS		Class1 JIS C6802
Control output (OSSD)	Output			Transistor outputs (NPN or PNP is selected in the software)
	Number of outputs			4 outputs
	Max. load current			500 mA ^*10
	Residual voltage (during ON)			Max. 2.5 V (with a cable length of 5 m 16.40')
	OFF-state voltage			Max. 2.0 V (with a cable length of 5 m 16.40')
	Leakage current			Max. 1 mA ^*11
	Max. capacitive load			2.2 μF (with a load resistance of 100 Ω)
	Load wiring resistance			Max. 2.5 Ω
Inputs	PNP			ON-voltage: 10 to 30 V, OFF-voltage: Open or 0 to 3 V, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)
	NPN			ON-voltage: 0 to 3 V, OFF-voltage: Open or 10 V to Power voltage, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)
Non-safety related output (AUX output)	Output type			Transistor outputs (NPN or PNP is selected by the dedicated PC software)
	Number of outputs			6 outputs
	Max. load current			Max. 50 mA
	Residual voltage (during ON)			Max. 2.5 V (with a cable length of 5 m 16.40')
	Muting lamp			Incandescent lamp (24 VDC, 1 to 5.5 W) or LED lamp (load current: 10 to 230 mA) can be connected
Interface	USB			USB2.0
	Ethernet	Standard		-
		Transmission rate
		Cable
		Connector
Network function
Cable length	Power and I/O cable			30 m 98.43' or less ^*12
	Between scanner head and display unitc			20 m 65.62' or less each ^*13
	Ethernet cable			-
Approved standards	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety			IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR), IEC61508, EN61508, EN ISO13849-1, 2015 (PLd, Category3), UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rating	Power consumption			11.8 W (without load), 55.0 W (with load) ^*14
	Power voltage			24 VDC ±10% (Ripple P-P 10% or less): When using a converter power supply, 24 VDC +20%/-30%: When using a battery
Environmental resistance	Enclosure rating			IP65(IEC60529)
	Ambient light			Incandescent lamp: 1500 lux or less ^*15
	Operating ambient temperature			-10 to +50°C 14 to 122°F (No freezing)
	Operating relative humidity			35% to 85% RH (No condensation)
	Storage temperature			-25 to +60°C -13 to +140°F (No freezing)
	Storage relative humidity			35% to 95% RH
	Vibration resistance			10 to 55 Hz, 0.7 mm 0.03" compound amplitude, 20 sweeps each in X, Y, and Z directions
	Shock resistance			100 m/s² 328.08 ft/s² (Approx. 10 G) 16 ms pulse, in X, Y, Z directions 1000 times each axis
Material	Scanner head	Main unit case		Magnesium
		Window		Polycarbonate, PEI
		Indicator part		Aluminum, PES
	Display unit	Case		Magnesium, PPS, Polycarbonate
	System memory			Aluminum, PPE
Weight				Approx. 2100 g
^1 Integrated models include display unit, scanner head, system memory and a connection cable (SZ-VS005). ^2 If the object to be detected moves parallel to the detection plane, SZ-V cannot detect the object moving at speed over 1.6 m/s 5.25 ft/s, regardless of the encoder setting. ^3 The response time, protection zone, and warning zone are affected by the operation mode. ^4 When using PROFIsafe, 6 ms is added to the response time. When using CIP Safety, 10ms is added to the response time. ^5 20% or more reflectance is necessary for the minimum detectable object in the warning zone. ^6 If there is a highly reflective background within 1.5 m 4.92' from the boundary of the protection zone, 200 mm 7.87" must be added as supplementary necessary distance to the protection zone when calculating the minimum safety distance. ^7 Even when using the network data output, the maximum measured output distance is 60 m 196.85'. ^8 Only applicable for the type with a camera. ^9 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^10 For the SZ-V04 type and the SZ-V32 type, the load current calculation of the OSSD output and AUX output is 1.5 A or less when using one scanner head, 1.0 A or less when using two scanner heads, and 0.5 A or less when using three scanner heads. For the SZ-V32N type, the load current calculation of the OSSD output and AUX output is 1.2 A or less when using one scanner head, 0.8 A or less when using two scanner heads, and 0.3 A or less when using three scanner heads. ^11 Includes when the power is OFF. ^12 10 m 32.81' or less when supplying power from a battery. ^13 When supplying power from a battery, the length of each connection cable should be 10 m 32.81' or less when using two scanner heads, and 5 m 16.40' or less when using three scanner heads. ^14 When using the SZ-V with series connected sensor heads, it is necessary to add 9.4 W per scanner head. Also, power consumption may temporarily be higher (maximum 3.6 W). Power consumption will be within the specification after SZ-V moves to normal operation. ^*15 An ambient light source should not be located within ±5° of the detection plane.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator

SZ-V04 Keyence

Specifications

Specifications

Specifications

SZ-V04 Keyence

Specifications

Specifications

Trusted By

You may also like

Recently viewed