SJ-L005F Keyence

Specifications

Model		SJ-L005F
Voltage application method		High frequency AC method
Applied voltage		3 kVAC
Ion balance		±10 V ^*1
Installation distance		50 mm 1.97 " or greater
Maximum air speed		7 m/s ^*1
Maximum air flow		0.16 m³/min
Ozone concentration		0.05 ppm or less ^*1
Control input	Static elimination stop input	Can switch between “non-voltage input” and “voltage input” ^2^3 For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) For voltage input: Maximum input rating 30 V , ON voltage 18 V or higher, OFF current 0.1 mA or lower, ON current 1 mA or lower (at 30 V)
Control output	Alarm (N.C.) /Ion level alarm (N.O.)	Open collector output: 30 V DC or less Maximum 50 mA or lower, Residual voltage 1 V or lower Switchable between NPN/PNP settings ^2^3
Power supply	Power voltage	24 V DC ±10 % (including ripple) or 12 V DC (dedicated AC adapter OP-88020/87722 ^*4)
	Power consumption	310 mA or less (for 24 V DC) 600 mA or less (for 12 V DC)
Environmental resistance	Ambient temperature	0 to +50 °C 32 to +122 °F (When using OP-87722, 0 to +40 °C 32 to +104 °F)
	Relative humidity	35 to 65 % RH (assuming no condensation)
	Overvoltage category	I
	Pollution degree	2
Weight		Approx. 100 g (main unit weight)
^1 Measurement results taken with an installation distance of 100 mm 3.94 " , maximum air flow and no air filter. (Representative values) ^2 Cannot be used when the power supply is an AC adapter ^3 “Static elimination stop input” and “ion level alarm output” are allocated to the white line using the setting switch. ^4 Rated input of 100 to 240 V AC , 50/60 Hz

Est. delivery between and

7,574.00 kr

1-year warranty

FREE WORDWIDE SHIPPING

Condition:

Sealed Surplus

SKU: SJ-L005F-Sealed

Sold out

0.00 kr

Never Used Surplus

SKU: SJ-L005F

5 verified stock

7,574.00 kr

Used

SKU: SJ-L005F-Used

1 verified stock

4,875.00 kr

Variant

Quantity:

Need More?

Specifications

Model		SJ-L005F
Voltage application method		High frequency AC method
Applied voltage		3 kVAC
Ion balance		±10 V ^*1
Installation distance		50 mm 1.97 " or greater
Maximum air speed		7 m/s ^*1
Maximum air flow		0.16 m³/min
Ozone concentration		0.05 ppm or less ^*1
Control input	Static elimination stop input	Can switch between “non-voltage input” and “voltage input” ^2^3 For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) For voltage input: Maximum input rating 30 V , ON voltage 18 V or higher, OFF current 0.1 mA or lower, ON current 1 mA or lower (at 30 V)
Control output	Alarm (N.C.) /Ion level alarm (N.O.)	Open collector output: 30 V DC or less Maximum 50 mA or lower, Residual voltage 1 V or lower Switchable between NPN/PNP settings ^2^3
Power supply	Power voltage	24 V DC ±10 % (including ripple) or 12 V DC (dedicated AC adapter OP-88020/87722 ^*4)
	Power consumption	310 mA or less (for 24 V DC) 600 mA or less (for 12 V DC)
Environmental resistance	Ambient temperature	0 to +50 °C 32 to +122 °F (When using OP-87722, 0 to +40 °C 32 to +104 °F)
	Relative humidity	35 to 65 % RH (assuming no condensation)
	Overvoltage category	I
	Pollution degree	2
Weight		Approx. 100 g (main unit weight)
^1 Measurement results taken with an installation distance of 100 mm 3.94 " , maximum air flow and no air filter. (Representative values) ^2 Cannot be used when the power supply is an AC adapter ^3 “Static elimination stop input” and “ion level alarm output” are allocated to the white line using the setting switch. ^4 Rated input of 100 to 240 V AC , 50/60 Hz

Model		SJ-L005F
Voltage application method		High frequency AC method
Applied voltage		3 kVAC
Ion balance		±10 V ^*1
Installation distance		50 mm 1.97 " or greater
Maximum air speed		7 m/s ^*1
Maximum air flow		0.16 m³/min
Ozone concentration		0.05 ppm or less ^*1
Control input	Static elimination stop input	Can switch between “non-voltage input” and “voltage input” ^2^3 For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) For voltage input: Maximum input rating 30 V , ON voltage 18 V or higher, OFF current 0.1 mA or lower, ON current 1 mA or lower (at 30 V)
Control output	Alarm (N.C.) /Ion level alarm (N.O.)	Open collector output: 30 V DC or less Maximum 50 mA or lower, Residual voltage 1 V or lower Switchable between NPN/PNP settings ^2^3
Power supply	Power voltage	24 V DC ±10 % (including ripple) or 12 V DC (dedicated AC adapter OP-88020/87722 ^*4)
	Power consumption	310 mA or less (for 24 V DC) 600 mA or less (for 12 V DC)
Environmental resistance	Ambient temperature	0 to +50 °C 32 to +122 °F (When using OP-87722, 0 to +40 °C 32 to +104 °F)
	Relative humidity	35 to 65 % RH (assuming no condensation)
	Overvoltage category	I
	Pollution degree	2
Weight		Approx. 100 g (main unit weight)
^1 Measurement results taken with an installation distance of 100 mm 3.94 " , maximum air flow and no air filter. (Representative values) ^2 Cannot be used when the power supply is an AC adapter ^3 “Static elimination stop input” and “ion level alarm output” are allocated to the white line using the setting switch. ^4 Rated input of 100 to 240 V AC , 50/60 Hz

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator