SI-FA103 Keyence

Specifications

Model			SI-FA103
Separate type
Type			Expansion controller^*1
No. of connectable spectrum units			1
Display	Minimum display unit		N/A
	Display range
	Display cycle
Terminal block	Laser remote interlock input		N/A^*2
	TIMING1 input
	RESET1 input
	Auto-zero1 input
	Laser control input
	Analog voltage output		±10 V x 1 outputs, Output impedance: 100 Ω^*2
	Analog current output		4 to 20 mA x 1 output, Maximum load resistance: 350 Ω^*2
	Alarm output		N/A^*2
	General comparator output
Expansion connector	TIMING2 input
	RESET input
	Auto-zero input
	Program switch input
	Alarm output
	Comparator/ binary output	Binary output
		Strobe output
		Binary selection output
		Binary selection input
RS-232C interface			N/A
USB interface
Ethernet interface
Major functions			12 Out simultaneous measurement calculation, average, filter, scaling measurement, measured value alarm, tolerance setting, auto-zero, data storage, light monitor, 8-program memory, interferometer mode, mask, connection of setting support software, etc.
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F^*3
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 0.5 mm 0.02", 2 hours in each of the X, Y, and Z directions
Weight			Approx. 300 g
^1 Up to four expansion controllers can be connected to the main controller. ^2 • NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. • Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. • Part of the input/output circuit of the SI Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring". ^*3 When two or more expansion controllers are connected, the ambient temperature is 0 to +40 °C 32 to 104 °F.

Price on request
Ask for quote

Specifications

Model			SI-FA103
Separate type
Type			Expansion controller^*1
No. of connectable spectrum units			1
Display	Minimum display unit		N/A
	Display range
	Display cycle
Terminal block	Laser remote interlock input		N/A^*2
	TIMING1 input
	RESET1 input
	Auto-zero1 input
	Laser control input
	Analog voltage output		±10 V x 1 outputs, Output impedance: 100 Ω^*2
	Analog current output		4 to 20 mA x 1 output, Maximum load resistance: 350 Ω^*2
	Alarm output		N/A^*2
	General comparator output
Expansion connector	TIMING2 input
	RESET input
	Auto-zero input
	Program switch input
	Alarm output
	Comparator/ binary output	Binary output
		Strobe output
		Binary selection output
		Binary selection input
RS-232C interface			N/A
USB interface
Ethernet interface
Major functions			12 Out simultaneous measurement calculation, average, filter, scaling measurement, measured value alarm, tolerance setting, auto-zero, data storage, light monitor, 8-program memory, interferometer mode, mask, connection of setting support software, etc.
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F^*3
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 0.5 mm 0.02", 2 hours in each of the X, Y, and Z directions
Weight			Approx. 300 g
^1 Up to four expansion controllers can be connected to the main controller. ^2 • NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. • Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. • Part of the input/output circuit of the SI Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring". ^*3 When two or more expansion controllers are connected, the ambient temperature is 0 to +40 °C 32 to 104 °F.

Model			SI-FA103
Separate type
Type			Expansion controller^*1
No. of connectable spectrum units			1
Display	Minimum display unit		N/A
	Display range
	Display cycle
Terminal block	Laser remote interlock input		N/A^*2
	TIMING1 input
	RESET1 input
	Auto-zero1 input
	Laser control input
	Analog voltage output		±10 V x 1 outputs, Output impedance: 100 Ω^*2
	Analog current output		4 to 20 mA x 1 output, Maximum load resistance: 350 Ω^*2
	Alarm output		N/A^*2
	General comparator output
Expansion connector	TIMING2 input
	RESET input
	Auto-zero input
	Program switch input
	Alarm output
	Comparator/ binary output	Binary output
		Strobe output
		Binary selection output
		Binary selection input
RS-232C interface			N/A
USB interface
Ethernet interface
Major functions			12 Out simultaneous measurement calculation, average, filter, scaling measurement, measured value alarm, tolerance setting, auto-zero, data storage, light monitor, 8-program memory, interferometer mode, mask, connection of setting support software, etc.
Environmental resistance	Ambient temperature		0 to +50 °C 32 to 122 °F^*3
	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 0.5 mm 0.02", 2 hours in each of the X, Y, and Z directions
Weight			Approx. 300 g
^1 Up to four expansion controllers can be connected to the main controller. ^2 • NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. • Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. • Part of the input/output circuit of the SI Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring". ^*3 When two or more expansion controllers are connected, the ambient temperature is 0 to +40 °C 32 to 104 °F.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator