LS-9501P Keyence

Specifications

Model		LS-9501P^*1
Type		Controller: PNP output type
No. of connectable sensor heads		2
Head compatibility		Yes
Display	Minimum display unit	0.01 µm
	Display range	±99,999.99 µm to ±9,999.9 mm
	LED display	POWER ON indicator, ERROR indicator
Input terminal block	Encoder input	NPN/PNP open-collector output, voltage output (5 V/12 V/24 V), line-driver output
	Synchronous 1, 2 input	Voltage input
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Storage trigger input
	Storage enable input
	Storage data clear input
	Statistics 1, 2 input
	Statistics clear 1, 2 input
	Program selection input	Voltage input x 4 inputs
Output terminal	Analog voltage output	±10 V x 2 outputs, output impedance 100 Ω
	Analog current output	4 to 20 mA x 2 outputs, compatible load max. 350 Ω
	Universal output	PNP open-collector output x 10 outputs Measured value and tolerance judgment output, status output allocatable
	Status 1, 2 output	PNP open-collector output
	Total judgment output
	Memory FULL output
	Strobe 1, 2 output
	Error output	PNP open-collector output (N.C.)
Interface	Ethernet	1000BASE-T/100BASE-TX^*2
	USB	USB 2.0 HI-SPEED supported (USB 1.1 Full-SPEED compatible)^*2
	RS-232C	Measured value output, control I/O, setting change, baud rate can be selected up to 115,200 bps
	Display and settings panel	LS-D1000 Max. four heads connectable
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
	Current consumption	When LS-HA100 not used: 1.0 A max. when 1 head connected; 1.4 A max. when 2 heads connected When LS-HA100 in use: 2.0 A max. when 3 heads connected; 2.3 A max. when 4 heads connected^*3
Environmental resistance	Ambient temperature	When LS-HA100 not used: 0 to +50 °C 32 to 122 °F When LS-HA100 in use: 0 to +45 °C 32 to 113 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 1,500 g
^1 PNP open-collector output rating: 50 mA max. (30 V max.), residual voltage of 1 V max. Voltage input rating: Input max. voltage 26.4 V, min. ON voltage 10.8 V, OFF current 0.6 mA max. ^2 Sample DLL and LabVIEW programs are available. Contact your local sales office for details. ^*3 Add the current consumption values for all units when connecting the display settings panel and expansion units. When the LS-9006D or LS-9030D is connected, it counts as two heads.

Est. delivery between and

121,795.00 kr

1-year warranty

FREE WORDWIDE SHIPPING

Condition:

Sealed Surplus

SKU: LS-9501P-Sealed

Sold out

0.00 kr

Never Used Surplus

SKU: LS-9501P

1 verified stock

121,795.00 kr

Used

SKU: LS-9501P-Used

4 verified stock

51,113.00 kr

Variant

Quantity:

Need More?

Specifications

Model		LS-9501P^*1
Type		Controller: PNP output type
No. of connectable sensor heads		2
Head compatibility		Yes
Display	Minimum display unit	0.01 µm
	Display range	±99,999.99 µm to ±9,999.9 mm
	LED display	POWER ON indicator, ERROR indicator
Input terminal block	Encoder input	NPN/PNP open-collector output, voltage output (5 V/12 V/24 V), line-driver output
	Synchronous 1, 2 input	Voltage input
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Storage trigger input
	Storage enable input
	Storage data clear input
	Statistics 1, 2 input
	Statistics clear 1, 2 input
	Program selection input	Voltage input x 4 inputs
Output terminal	Analog voltage output	±10 V x 2 outputs, output impedance 100 Ω
	Analog current output	4 to 20 mA x 2 outputs, compatible load max. 350 Ω
	Universal output	PNP open-collector output x 10 outputs Measured value and tolerance judgment output, status output allocatable
	Status 1, 2 output	PNP open-collector output
	Total judgment output
	Memory FULL output
	Strobe 1, 2 output
	Error output	PNP open-collector output (N.C.)
Interface	Ethernet	1000BASE-T/100BASE-TX^*2
	USB	USB 2.0 HI-SPEED supported (USB 1.1 Full-SPEED compatible)^*2
	RS-232C	Measured value output, control I/O, setting change, baud rate can be selected up to 115,200 bps
	Display and settings panel	LS-D1000 Max. four heads connectable
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
	Current consumption	When LS-HA100 not used: 1.0 A max. when 1 head connected; 1.4 A max. when 2 heads connected When LS-HA100 in use: 2.0 A max. when 3 heads connected; 2.3 A max. when 4 heads connected^*3
Environmental resistance	Ambient temperature	When LS-HA100 not used: 0 to +50 °C 32 to 122 °F When LS-HA100 in use: 0 to +45 °C 32 to 113 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 1,500 g
^1 PNP open-collector output rating: 50 mA max. (30 V max.), residual voltage of 1 V max. Voltage input rating: Input max. voltage 26.4 V, min. ON voltage 10.8 V, OFF current 0.6 mA max. ^2 Sample DLL and LabVIEW programs are available. Contact your local sales office for details. ^*3 Add the current consumption values for all units when connecting the display settings panel and expansion units. When the LS-9006D or LS-9030D is connected, it counts as two heads.

Model		LS-9501P^*1
Type		Controller: PNP output type
No. of connectable sensor heads		2
Head compatibility		Yes
Display	Minimum display unit	0.01 µm
	Display range	±99,999.99 µm to ±9,999.9 mm
	LED display	POWER ON indicator, ERROR indicator
Input terminal block	Encoder input	NPN/PNP open-collector output, voltage output (5 V/12 V/24 V), line-driver output
	Synchronous 1, 2 input	Voltage input
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Storage trigger input
	Storage enable input
	Storage data clear input
	Statistics 1, 2 input
	Statistics clear 1, 2 input
	Program selection input	Voltage input x 4 inputs
Output terminal	Analog voltage output	±10 V x 2 outputs, output impedance 100 Ω
	Analog current output	4 to 20 mA x 2 outputs, compatible load max. 350 Ω
	Universal output	PNP open-collector output x 10 outputs Measured value and tolerance judgment output, status output allocatable
	Status 1, 2 output	PNP open-collector output
	Total judgment output
	Memory FULL output
	Strobe 1, 2 output
	Error output	PNP open-collector output (N.C.)
Interface	Ethernet	1000BASE-T/100BASE-TX^*2
	USB	USB 2.0 HI-SPEED supported (USB 1.1 Full-SPEED compatible)^*2
	RS-232C	Measured value output, control I/O, setting change, baud rate can be selected up to 115,200 bps
	Display and settings panel	LS-D1000 Max. four heads connectable
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
	Current consumption	When LS-HA100 not used: 1.0 A max. when 1 head connected; 1.4 A max. when 2 heads connected When LS-HA100 in use: 2.0 A max. when 3 heads connected; 2.3 A max. when 4 heads connected^*3
Environmental resistance	Ambient temperature	When LS-HA100 not used: 0 to +50 °C 32 to 122 °F When LS-HA100 in use: 0 to +45 °C 32 to 113 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 1,500 g
^1 PNP open-collector output rating: 50 mA max. (30 V max.), residual voltage of 1 V max. Voltage input rating: Input max. voltage 26.4 V, min. ON voltage 10.8 V, OFF current 0.6 mA max. ^2 Sample DLL and LabVIEW programs are available. Contact your local sales office for details. ^*3 Add the current consumption values for all units when connecting the display settings panel and expansion units. When the LS-9006D or LS-9030D is connected, it counts as two heads.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator