LS-7001 Keyence

Specifications

Model			LS-7001^*1
Type			Standard
No. of connectable sensor heads			2 (fully compatible for all head types except monitor (M) models)
Display	Measurement display		Main display: 7-segment red LED (Character height: 20.3 mm 0.80") Sub-display: 7-segment red LED (Character height: 9.9 mm 0.39") x 3
	Minimum display unit		0.01 µm to 100 µm (7-level selectable)
	Display range		±99.99999 to ±9,999.9 mm ±3.937" to ±393.7" (Linked to minimum display unit setting, mm/µm selectable)
	Measurement position monitor		7-level display with a red LED
	Tolerance check output display		Green LED (GO), Red LED x 2 (HI, LO)
Input terminal block	Synchronous 1, 2 input		Non-voltage input for OUT1
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Statistics 1, 2 input		-
	Program selection input		Non-voltage input x 4 inputs
Output terminal	Analog voltage output		±10 V x 2 outputs
	Alarm output		NPN open-collector output (N.C.)
	Total judgment output		NPN open-collector output for OUT1
	Comparator ready output
	Strobe 1, 2 output
Connector I/O	SUB mode	Statistical processing output	-
		Function output	Selectable from focus, area check, and differential, NPN open-collector output x 2 outputs^*2
		5-level comparator output	NPN open-collector output for OUT2^*2
		Comparator ready output
		Strobe output
	BCD mode	BCD output	Measurement data output (Sign + 7 digits), OUT1/OUT2 selectable, NPN open-collector output^*2
		BCD selection output	NPN open-collector output^*2
		BCD selection input	Non-voltage input^*2
	Statistical processing input		-
	Synchronous input		Non-voltage input for OUT2
	Reset input
	Auto-zero input
Interface	RS-232C		Measurement data output and control I/O, printer (Baud rate can be selected up to 115,200 bps.)
Video output			-
Major functions			Simultaneous measurement, Area designation, Calculation, Averaging, Calibration, 16-program memory, Measurement modes, Auto-zero,Print-out, Abnormal value elimination, Transparent object measurement, Mutual interference prevention, etc.
Rating	Power voltage		24 VDC ±10 %^*3
	Power consumption		0.7 A max.^*3
Environmental resistance	Enclosure rating		IP64 (Panel surface only)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 820 g
^1 The rating of the NPN open-collector inside the terminal block is: 100 mA max. (40 V max.), residual voltage of 0.5 V max. The rating of the NPN open-collector inside the connector I/O is: 30 mA max. (30 V max.), residual voltage of 0.5 V max. The rating of non-voltage input is: ON voltage of 1 V max., OFF current of 0.6 mA max. ^2 Either SUB mode or BCD mode can be selected. ^*3 AC power supply can be used when the LS-S11 (AC power supply stand) is connected.

Est. delivery between and

39,701.00 kr

1-year warranty

FREE WORDWIDE SHIPPING

Condition:

Sealed Surplus

SKU: LS-7001-Sealed

Sold out

0.00 kr

Never Used Surplus

SKU: LS-7001

5 verified stock

39,701.00 kr

Used

SKU: LS-7001-Used

4 verified stock

22,338.00 kr

Variant

Quantity:

Need More?

Specifications

Model			LS-7001^*1
Type			Standard
No. of connectable sensor heads			2 (fully compatible for all head types except monitor (M) models)
Display	Measurement display		Main display: 7-segment red LED (Character height: 20.3 mm 0.80") Sub-display: 7-segment red LED (Character height: 9.9 mm 0.39") x 3
	Minimum display unit		0.01 µm to 100 µm (7-level selectable)
	Display range		±99.99999 to ±9,999.9 mm ±3.937" to ±393.7" (Linked to minimum display unit setting, mm/µm selectable)
	Measurement position monitor		7-level display with a red LED
	Tolerance check output display		Green LED (GO), Red LED x 2 (HI, LO)
Input terminal block	Synchronous 1, 2 input		Non-voltage input for OUT1
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Statistics 1, 2 input		-
	Program selection input		Non-voltage input x 4 inputs
Output terminal	Analog voltage output		±10 V x 2 outputs
	Alarm output		NPN open-collector output (N.C.)
	Total judgment output		NPN open-collector output for OUT1
	Comparator ready output
	Strobe 1, 2 output
Connector I/O	SUB mode	Statistical processing output	-
		Function output	Selectable from focus, area check, and differential, NPN open-collector output x 2 outputs^*2
		5-level comparator output	NPN open-collector output for OUT2^*2
		Comparator ready output
		Strobe output
	BCD mode	BCD output	Measurement data output (Sign + 7 digits), OUT1/OUT2 selectable, NPN open-collector output^*2
		BCD selection output	NPN open-collector output^*2
		BCD selection input	Non-voltage input^*2
	Statistical processing input		-
	Synchronous input		Non-voltage input for OUT2
	Reset input
	Auto-zero input
Interface	RS-232C		Measurement data output and control I/O, printer (Baud rate can be selected up to 115,200 bps.)
Video output			-
Major functions			Simultaneous measurement, Area designation, Calculation, Averaging, Calibration, 16-program memory, Measurement modes, Auto-zero,Print-out, Abnormal value elimination, Transparent object measurement, Mutual interference prevention, etc.
Rating	Power voltage		24 VDC ±10 %^*3
	Power consumption		0.7 A max.^*3
Environmental resistance	Enclosure rating		IP64 (Panel surface only)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 820 g
^1 The rating of the NPN open-collector inside the terminal block is: 100 mA max. (40 V max.), residual voltage of 0.5 V max. The rating of the NPN open-collector inside the connector I/O is: 30 mA max. (30 V max.), residual voltage of 0.5 V max. The rating of non-voltage input is: ON voltage of 1 V max., OFF current of 0.6 mA max. ^2 Either SUB mode or BCD mode can be selected. ^*3 AC power supply can be used when the LS-S11 (AC power supply stand) is connected.

Model			LS-7001^*1
Type			Standard
No. of connectable sensor heads			2 (fully compatible for all head types except monitor (M) models)
Display	Measurement display		Main display: 7-segment red LED (Character height: 20.3 mm 0.80") Sub-display: 7-segment red LED (Character height: 9.9 mm 0.39") x 3
	Minimum display unit		0.01 µm to 100 µm (7-level selectable)
	Display range		±99.99999 to ±9,999.9 mm ±3.937" to ±393.7" (Linked to minimum display unit setting, mm/µm selectable)
	Measurement position monitor		7-level display with a red LED
	Tolerance check output display		Green LED (GO), Red LED x 2 (HI, LO)
Input terminal block	Synchronous 1, 2 input		Non-voltage input for OUT1
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Statistics 1, 2 input		-
	Program selection input		Non-voltage input x 4 inputs
Output terminal	Analog voltage output		±10 V x 2 outputs
	Alarm output		NPN open-collector output (N.C.)
	Total judgment output		NPN open-collector output for OUT1
	Comparator ready output
	Strobe 1, 2 output
Connector I/O	SUB mode	Statistical processing output	-
		Function output	Selectable from focus, area check, and differential, NPN open-collector output x 2 outputs^*2
		5-level comparator output	NPN open-collector output for OUT2^*2
		Comparator ready output
		Strobe output
	BCD mode	BCD output	Measurement data output (Sign + 7 digits), OUT1/OUT2 selectable, NPN open-collector output^*2
		BCD selection output	NPN open-collector output^*2
		BCD selection input	Non-voltage input^*2
	Statistical processing input		-
	Synchronous input		Non-voltage input for OUT2
	Reset input
	Auto-zero input
Interface	RS-232C		Measurement data output and control I/O, printer (Baud rate can be selected up to 115,200 bps.)
Video output			-
Major functions			Simultaneous measurement, Area designation, Calculation, Averaging, Calibration, 16-program memory, Measurement modes, Auto-zero,Print-out, Abnormal value elimination, Transparent object measurement, Mutual interference prevention, etc.
Rating	Power voltage		24 VDC ±10 %^*3
	Power consumption		0.7 A max.^*3
Environmental resistance	Enclosure rating		IP64 (Panel surface only)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 820 g
^1 The rating of the NPN open-collector inside the terminal block is: 100 mA max. (40 V max.), residual voltage of 0.5 V max. The rating of the NPN open-collector inside the connector I/O is: 30 mA max. (30 V max.), residual voltage of 0.5 V max. The rating of non-voltage input is: ON voltage of 1 V max., OFF current of 0.6 mA max. ^2 Either SUB mode or BCD mode can be selected. ^*3 AC power supply can be used when the LS-S11 (AC power supply stand) is connected.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator